Skip to Content

Changes for page Change Gateway Power

Last modified by Xiaoling on 2022/08/10 15:18
From version 5.1
edited by Edwin Chen
on 2022/06/20 17:43
Change comment: There is no comment for this version
To version 7.1
edited by Edwin Chen
on 2022/06/23 09:36
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,4 +1,4 @@
1 -= Introduction =
1 += Change Power for Semtech UDP Paket forward connection =
2 2  
3 3  ----
4 4  
... ... @@ -24,10 +24,15 @@
24 24   "dig_gain": 0
25 25  )))
26 26  
27 +(% class="mark" %)Note: If when lorawan server specify a rf_power which is not list above. gateway will choose the closest power. profile.
27 27  
29 +
28 28  When LoRaWAN server sends a downlink stream, server will also ask the gateway to use which rf_power as output. So user don't need to consider to control in the gateway side.
29 29  
30 -If user want to always use a higher power or a lower power. User can modify the pa_gain,mix_gain,dig_gain for specify rf_power to achieve this purpose. This is not recommend, because this might break the regulator for specify country.
32 +If user want to always use a higher power or a lower power. User can modify the pa_gain,mix_gain,dig_gain for specify rf_power to achieve this purpose. This is not recommended, because this might break the regulator for specific country.
31 31  
32 -Please note, the global_conf.json file will be overwrite by the match region files in /etc/lora/cfg-30x when change settings in the web. So user need to change the files in /etc/lora/cfg-cfg-30x instead of global_conf.json
34 +Please note, that the global_conf.json file will be overwritten by the match region files in /etc/lora/cfg-30x when changing settings in the web. So user needs to change the files in /etc/lora/cfg-cfg-30x instead of global_conf.json
33 33  
36 +
37 +
38 += Change Power for LoRaWAN Basic Station connection =