Skip to Content

Changes for page Change Gateway Power

Last modified by Xiaoling on 2022/08/10 15:18
From version 5.1
edited by Edwin Chen
on 2022/06/20 17:43
Change comment: There is no comment for this version
To version 1.3
edited by Xiaoling
on 2022/05/14 13:44
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Edwin
1 +XWiki.Xiaoling
Content
... ... @@ -1,12 +1,9 @@
1 1  = Introduction =
2 2  
3 -----
4 -
5 5  In LoRaWAN protocol, the gateway output power refer to the downstream packets sent by Gateway. This output power is controlled by LoRaWAN server.
6 6  
7 7  Gateway maintain a power index in the file: /etc/lora/global_conf.json for example:
8 8  
9 -
10 10  (% class="box" %)
11 11  (((
12 12  "tx_lut_3": {
... ... @@ -24,10 +24,8 @@
24 24   "dig_gain": 0
25 25  )))
26 26  
27 -
28 28  When LoRaWAN server sends a downlink stream, server will also ask the gateway to use which rf_power as output. So user don't need to consider to control in the gateway side.
29 29  
30 30  If user want to always use a higher power or a lower power. User can modify the pa_gain,mix_gain,dig_gain for specify rf_power to achieve this purpose. This is not recommend, because this might break the regulator for specify country.
31 31  
32 32  Please note, the global_conf.json file will be overwrite by the match region files in /etc/lora/cfg-30x when change settings in the web. So user need to change the files in /etc/lora/cfg-cfg-30x instead of global_conf.json
33 -