Skip to Content

Changes for page Change Gateway Power

Last modified by Xiaoling on 2022/08/10 15:18
From version 5.1
edited by Edwin Chen
on 2022/06/20 17:43
Change comment: There is no comment for this version
To version 1.2
edited by Xiaoling
on 2022/05/14 13:43
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Edwin
1 +XWiki.Xiaoling
Content
... ... @@ -1,33 +1,0 @@
1 -= Introduction =
2 -
3 -----
4 -
5 -In LoRaWAN protocol, the gateway output power refer to the downstream packets sent by Gateway. This output power is controlled by LoRaWAN server.
6 -
7 -Gateway maintain a power index in the file: /etc/lora/global_conf.json for example:
8 -
9 -
10 -(% class="box" %)
11 -(((
12 -"tx_lut_3": {
13 - "desc": "TX gain table, index 3",        ~/~/ Index 3 refer to rf_power: 15dB. device will set the pa_gain,mix_gain,dig_gain 
14 - "pa_gain": 2,                            ~/~/ to the value mentioned here so to generate 15dB output power.
15 - "mix_gain": 10,
16 - "rf_power": 15,
17 - "dig_gain": 1
18 -},
19 -"tx_lut_4": {
20 - "desc": "TX gain table, index 4",
21 - "pa_gain": 2,
22 - "mix_gain": 10,
23 - "rf_power": 16,
24 - "dig_gain": 0
25 -)))
26 -
27 -
28 -When LoRaWAN server sends a downlink stream, server will also ask the gateway to use which rf_power as output. So user don't need to consider to control in the gateway side.
29 -
30 -If user want to always use a higher power or a lower power. User can modify the pa_gain,mix_gain,dig_gain for specify rf_power to achieve this purpose. This is not recommend, because this might break the regulator for specify country.
31 -
32 -Please note, the global_conf.json file will be overwrite by the match region files in /etc/lora/cfg-30x when change settings in the web. So user need to change the files in /etc/lora/cfg-cfg-30x instead of global_conf.json
33 -