Summary

• Page properties (2 modified, 0 added, 0 removed)

Details

Page properties

Author

...	...	@@ -1,1 +1,1 @@
1		-XWiki.Xiaoling
	1	+XWiki.Edwin

Content

...	...	@@ -2,17 +2,13 @@
2	2
3	3	----
4	4
5		-(((
6	6	In LoRaWAN protocol, the gateway output power refer to the downstream packets sent by Gateway. This output power is controlled by LoRaWAN server.
7		-)))
8	8
9		-(((
10	10	Gateway maintain a power index in the file: /etc/lora/global_conf.json for example:
11		-)))
12	12
	9	+
13	13	(% class="box" %)
14	14	(((
15		-(((
16	16	"tx_lut_3": {
17	17	"desc": "TX gain table, index 3",        ~/~/ Index 3 refer to rf_power: 15dB. device will set the pa_gain,mix_gain,dig_gain
18	18	"pa_gain": 2,                            ~/~/ to the value mentioned here so to generate 15dB output power.
...	...	@@ -27,16 +27,11 @@
27	27	"rf_power": 16,
28	28	"dig_gain": 0
29	29	)))
30		-)))
31	31
32		-(((
	27	+
33	33	When LoRaWAN server sends a downlink stream, server will also ask the gateway to use which rf_power as output. So user don't need to consider to control in the gateway side.
34		-)))
35	35
36		-(((
37	37	If user want to always use a higher power or a lower power. User can modify the pa_gain,mix_gain,dig_gain for specify rf_power to achieve this purpose. This is not recommend, because this might break the regulator for specify country.
38		-)))
39	39
40		-(((
41	41	Please note, the global_conf.json file will be overwrite by the match region files in /etc/lora/cfg-30x when change settings in the web. So user need to change the files in /etc/lora/cfg-cfg-30x instead of global_conf.json
42		-)))
	33	+