Skip to Content

Changes for page Change Gateway Power

Last modified by Xiaoling on 2022/08/10 15:18
From version 4.1
edited by Xiaoling
on 2022/05/27 17:09
Change comment: There is no comment for this version
To version 1.2
edited by Xiaoling
on 2022/05/14 13:43
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,42 +1,0 @@
1 -= Introduction =
2 -
3 -----
4 -
5 -(((
6 -In LoRaWAN protocol, the gateway output power refer to the downstream packets sent by Gateway. This output power is controlled by LoRaWAN server.
7 -)))
8 -
9 -(((
10 -Gateway maintain a power index in the file: /etc/lora/global_conf.json for example:
11 -)))
12 -
13 -(% class="box" %)
14 -(((
15 -(((
16 -"tx_lut_3": {
17 - "desc": "TX gain table, index 3",        ~/~/ Index 3 refer to rf_power: 15dB. device will set the pa_gain,mix_gain,dig_gain 
18 - "pa_gain": 2,                            ~/~/ to the value mentioned here so to generate 15dB output power.
19 - "mix_gain": 10,
20 - "rf_power": 15,
21 - "dig_gain": 1
22 -},
23 -"tx_lut_4": {
24 - "desc": "TX gain table, index 4",
25 - "pa_gain": 2,
26 - "mix_gain": 10,
27 - "rf_power": 16,
28 - "dig_gain": 0
29 -)))
30 -)))
31 -
32 -(((
33 -When LoRaWAN server sends a downlink stream, server will also ask the gateway to use which rf_power as output. So user don't need to consider to control in the gateway side.
34 -)))
35 -
36 -(((
37 -If user want to always use a higher power or a lower power. User can modify the pa_gain,mix_gain,dig_gain for specify rf_power to achieve this purpose. This is not recommend, because this might break the regulator for specify country.
38 -)))
39 -
40 -(((
41 -Please note, the global_conf.json file will be overwrite by the match region files in /etc/lora/cfg-30x when change settings in the web. So user need to change the files in /etc/lora/cfg-cfg-30x instead of global_conf.json
42 -)))