Skip to Content

Changes for page Change Gateway Power

Last modified by Xiaoling on 2022/08/10 15:18
From version 18.5
edited by Xiaoling
on 2022/08/10 15:18
Change comment: There is no comment for this version
To version 18.4
edited by Xiaoling
on 2022/07/22 15:14
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -10,11 +10,10 @@
10 10  
11 11  
12 12  (((
13 -In LoRaWAN protocol, the gateway transmit packet uses the output power base on the Power Index from the LoRaWAN server downlink. for example, the LoRaWAN server sends a downlink with this info** "rf_power=14"**, gateway got this info and it will search the index for rf_power=14 and use the related rf setting to set output power. In some cases, the LoRaWAN server might set the rf-power to a quite low value ( for example 0dB) which is not practical for use. In such a case, the User can manually change the **rf_power=0's** rf settings to a higher power out. Below are the methods.
13 +In LoRaWAN protocol, the gateway transmit packet uses the output power base on the Power Index from the LoRaWAN server downlink. for example, the LoRaWAN server sends a downlink with this info "rf_power=14", gateway got this info and it will search the index for rf_power=14 and use the related rf setting to set output power. In some cases, the LoRaWAN server might set the rf-power to a quite low value ( for example 0dB) which is not practical for use. In such a case, the User can manually change the rf_power=0's rf settings to a higher power out. Below are the methods.
14 14  )))
15 15  
16 16  
17 -
18 18  = 2.  Change Power for Semtech UDP Paket forward connection =
19 19  
20 20  
... ... @@ -63,7 +63,6 @@
63 63  )))
64 64  
65 65  
66 -
67 67  = 3.  Change Power for LoRaWAN Basic Station connection =
68 68  
69 69  
... ... @@ -170,8 +170,6 @@
170 170  
171 171  (((
172 172  If users want to always use a higher power or a lower power. Users can modify the pa_gain,mix_gain, and dig_gain to specify rf_power to achieve this purpose. This is not recommended, because this might break the regulator for a specific country.
173 -
174 -
175 175  )))
176 176  
177 177  (((
... ... @@ -179,7 +179,6 @@
179 179  )))
180 180  
181 181  
182 -
183 183  = 4.  Checking station Logs =
184 184  
185 185