Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -10,10 +10,11 @@
10	10
11	11
12	12	(((
13		-In LoRaWAN protocol, the gateway transmit packet uses the output power base on the Power Index from the LoRaWAN server downlink. for example, the LoRaWAN server sends a downlink with this info "rf_power=14", gateway got this info and it will search the index for rf_power=14 and use the related rf setting to set output power. In some cases, the LoRaWAN server might set the rf-power to a quite low value ( for example 0dB) which is not practical for use. In such a case, the User can manually change the rf_power=0's rf settings to a higher power out. Below are the methods.
	13	+In LoRaWAN protocol, the gateway transmit packet uses the output power base on the Power Index from the LoRaWAN server downlink. for example, the LoRaWAN server sends a downlink with this info** "rf_power=14"**, gateway got this info and it will search the index for rf_power=14 and use the related rf setting to set output power. In some cases, the LoRaWAN server might set the rf-power to a quite low value ( for example 0dB) which is not practical for use. In such a case, the User can manually change the **rf_power=0's** rf settings to a higher power out. Below are the methods.
14	14	)))
15	15
16	16
	17	+
17	17	= 2.  Change Power for Semtech UDP Paket forward connection =
18	18
19	19
...	...	@@ -62,6 +62,7 @@
62	62	)))
63	63
64	64
	66	+
65	65	= 3.  Change Power for LoRaWAN Basic Station connection =
66	66
67	67
...	...	@@ -168,6 +168,8 @@
168	168
169	169	(((
170	170	If users want to always use a higher power or a lower power. Users can modify the pa_gain,mix_gain, and dig_gain to specify rf_power to achieve this purpose. This is not recommended, because this might break the regulator for a specific country.
	173	+
	174	+
171	171	)))
172	172
173	173	(((
...	...	@@ -175,6 +175,7 @@
175	175	)))
176	176
177	177
	182	+
178	178	= 4.  Checking station Logs =
179	179
180	180