Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -9,21 +9,15 @@
9	9	= 1.  Overview =
10	10
11	11
12		-(((
13	13	In LoRaWAN protocol, the gateway transmit packet uses the output power base on the Power Index from the LoRaWAN server downlink. for example, the LoRaWAN server sends a downlink with this info "rf_power=14", gateway got this info and it will search the index for rf_power=14 and use the related rf setting to set output power. In some cases, the LoRaWAN server might set the rf-power to a quite low value ( for example 0dB) which is not practical for use. In such a case, the User can manually change the rf_power=0's rf settings to a higher power out. Below are the methods.
14		-)))
15	15
16	16
17	17	= 2.  Change Power for Semtech UDP Paket forward connection =
18	18
19	19
20		-(((
21	21	In LoRaWAN protocol, the gateway output power refers to the downstream packets sent by Gateway. This output power is controlled by the LoRaWAN server.
22		-)))
23	23
24		-(((
25	25	Gateway maintains a power index in the file: /etc/lora/global_conf.json for example:
26		-)))
27	27
28	28
29	29	(% class="box" %)
...	...	@@ -30,7 +30,7 @@
30	30	(((
31	31	"tx_lut_3": {
32	32	"desc": "TX gain table, index 3",        ~/~/ Index 3 refer to rf_power: 15dB. device will set the pa_gain,mix_gain,dig_gain
33		- "pa_gain": 2,  ~/~/ to the value mentioned here so to generate 15dB output power.
	27	+ "pa_gain": 2,                            ~/~/ to the value mentioned here so to generate 15dB output power.
34	34	"mix_gain": 10,
35	35	"rf_power": 15,
36	36	"dig_gain": 1
...	...	@@ -44,22 +44,14 @@
44	44	)))
45	45
46	46
47		-(((
48	48	(% style="color:red" %)**Note: If when lorawan server specifies a rf_power that is not listed above. gateway will choose the closest power. profile.**
49		-)))
50	50
51	51
52		-(((
53	53	When the LoRaWAN server sends a downlink stream, the server will also ask the gateway to use rf_power as output. So users don't need to consider controlling on the gateway side.
54		-)))
55	55
56		-(((
57	57	If users want to always use a higher power or a lower power. Users can modify the pa_gain,mix_gain, and dig_gain to specify rf_power to achieve this purpose. This is not recommended, because this might break the regulator for a specific country.
58		-)))
59	59
60		-(((
61	61	Please note, that the global_conf.json file will be overwritten by the match region files in /etc/lora/cfg-30x when changing settings on the web. So the user needs to change the files in /etc/lora/cfg-cfg-30x instead of global_conf.json
62		-)))
63	63
64	64
65	65	= 3.  Change Power for LoRaWAN Basic Station connection =