Summary

• Page properties (2 modified, 0 added, 0 removed)

Details

Page properties

Author

...	...	@@ -1,1 +1,1 @@
1		-XWiki.Xiaoling
	1	+XWiki.Edwin

Content

...	...	@@ -1,16 +1,14 @@
1	1	= Introduction =
2	2
3		-(((
	3	+----
	4	+
4	4	In LoRaWAN protocol, the gateway output power refer to the downstream packets sent by Gateway. This output power is controlled by LoRaWAN server.
5		-)))
6	6
7		-(((
8	8	Gateway maintain a power index in the file: /etc/lora/global_conf.json for example:
9		-)))
10	10
	9	+
11	11	(% class="box" %)
12	12	(((
13		-(((
14	14	"tx_lut_3": {
15	15	"desc": "TX gain table, index 3",        ~/~/ Index 3 refer to rf_power: 15dB. device will set the pa_gain,mix_gain,dig_gain
16	16	"pa_gain": 2,                            ~/~/ to the value mentioned here so to generate 15dB output power.
...	...	@@ -25,24 +25,11 @@
25	25	"rf_power": 16,
26	26	"dig_gain": 0
27	27	)))
28		-)))
29	29
30		-(((
	27	+
31	31	When LoRaWAN server sends a downlink stream, server will also ask the gateway to use which rf_power as output. So user don't need to consider to control in the gateway side.
32		-)))
33	33
34		-(((
35		-
36		-)))
37		-
38		-(((
39	39	If user want to always use a higher power or a lower power. User can modify the pa_gain,mix_gain,dig_gain for specify rf_power to achieve this purpose. This is not recommend, because this might break the regulator for specify country.
40		-)))
41	41
42		-(((
43		-
44		-)))
45		-
46		-(((
47	47	Please note, the global_conf.json file will be overwrite by the match region files in /etc/lora/cfg-30x when change settings in the web. So user need to change the files in /etc/lora/cfg-cfg-30x instead of global_conf.json
48		-)))
	33	+