Skip to Content

Changes for page Change Gateway Power

Last modified by Xiaoling on 2022/08/10 15:18
From version 1.4
edited by Xiaoling
on 2022/05/14 13:45
Change comment: There is no comment for this version
To version 1.3
edited by Xiaoling
on 2022/05/14 13:44
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,12 +1,8 @@
1 1  = Introduction =
2 2  
3 -(((
4 4  In LoRaWAN protocol, the gateway output power refer to the downstream packets sent by Gateway. This output power is controlled by LoRaWAN server.
5 -)))
6 6  
7 -(((
8 8  Gateway maintain a power index in the file: /etc/lora/global_conf.json for example:
9 -)))
10 10  
11 11  (% class="box" %)
12 12  (((
... ... @@ -25,14 +25,8 @@
25 25   "dig_gain": 0
26 26  )))
27 27  
28 -(((
29 29  When LoRaWAN server sends a downlink stream, server will also ask the gateway to use which rf_power as output. So user don't need to consider to control in the gateway side.
30 -)))
31 31  
32 -(((
33 33  If user want to always use a higher power or a lower power. User can modify the pa_gain,mix_gain,dig_gain for specify rf_power to achieve this purpose. This is not recommend, because this might break the regulator for specify country.
34 -)))
35 35  
36 -(((
37 37  Please note, the global_conf.json file will be overwrite by the match region files in /etc/lora/cfg-30x when change settings in the web. So user need to change the files in /etc/lora/cfg-cfg-30x instead of global_conf.json
38 -)))