Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -1,11 +1,16 @@
1	1	= Introduction =
2	2
	3	+(((
3	3	In LoRaWAN protocol, the gateway output power refer to the downstream packets sent by Gateway. This output power is controlled by LoRaWAN server.
	5	+)))
4	4
	7	+(((
5	5	Gateway maintain a power index in the file: /etc/lora/global_conf.json for example:
	9	+)))
6	6
7	7	(% class="box" %)
8	8	(((
	13	+(((
9	9	"tx_lut_3": {
10	10	"desc": "TX gain table, index 3",        ~/~/ Index 3 refer to rf_power: 15dB. device will set the pa_gain,mix_gain,dig_gain
11	11	"pa_gain": 2,                            ~/~/ to the value mentioned here so to generate 15dB output power.
...	...	@@ -20,9 +20,16 @@
20	20	"rf_power": 16,
21	21	"dig_gain": 0
22	22	)))
	28	+)))
23	23
	30	+(((
24	24	When LoRaWAN server sends a downlink stream, server will also ask the gateway to use which rf_power as output. So user don't need to consider to control in the gateway side.
	32	+)))
25	25
	34	+(((
26	26	If user want to always use a higher power or a lower power. User can modify the pa_gain,mix_gain,dig_gain for specify rf_power to achieve this purpose. This is not recommend, because this might break the regulator for specify country.
	36	+)))
27	27
	38	+(((
28	28	Please note, the global_conf.json file will be overwrite by the match region files in /etc/lora/cfg-30x when change settings in the web. So user need to change the files in /etc/lora/cfg-cfg-30x instead of global_conf.json
	40	+)))