Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -1,0 +1,40 @@
	1	+= Introduction =
	2	+
	3	+(((
	4	+In LoRaWAN protocol, the gateway output power refer to the downstream packets sent by Gateway. This output power is controlled by LoRaWAN server.
	5	+)))
	6	+
	7	+(((
	8	+Gateway maintain a power index in the file: /etc/lora/global_conf.json for example:
	9	+)))
	10	+
	11	+(% class="box" %)
	12	+(((
	13	+(((
	14	+"tx_lut_3": {
	15	+ "desc": "TX gain table, index 3",        ~/~/ Index 3 refer to rf_power: 15dB. device will set the pa_gain,mix_gain,dig_gain
	16	+ "pa_gain": 2,                            ~/~/ to the value mentioned here so to generate 15dB output power.
	17	+ "mix_gain": 10,
	18	+ "rf_power": 15,
	19	+ "dig_gain": 1
	20	+},
	21	+"tx_lut_4": {
	22	+ "desc": "TX gain table, index 4",
	23	+ "pa_gain": 2,
	24	+ "mix_gain": 10,
	25	+ "rf_power": 16,
	26	+ "dig_gain": 0
	27	+)))
	28	+)))
	29	+
	30	+(((
	31	+When LoRaWAN server sends a downlink stream, server will also ask the gateway to use which rf_power as output. So user don't need to consider to control in the gateway side.
	32	+)))
	33	+
	34	+(((
	35	+If user want to always use a higher power or a lower power. User can modify the pa_gain,mix_gain,dig_gain for specify rf_power to achieve this purpose. This is not recommend, because this might break the regulator for specify country.
	36	+)))
	37	+
	38	+(((
	39	+Please note, the global_conf.json file will be overwrite by the match region files in /etc/lora/cfg-30x when change settings in the web. So user need to change the files in /etc/lora/cfg-cfg-30x instead of global_conf.json
	40	+)))