Wiki source code of Can I use an external power adapter or solar panel to power motherboard?
Hide last authors
| author | version | line-number | content |
|---|---|---|---|
 |
11.2 | 1 | **Table of Contents: ** |
| 2 | |||
| |
1.1 | 3 | {{toc/}} |
| 4 | |||
| 5 | |||
| 6 | |||
| 7 | |||
| |
14.1 | 8 | = 1. Can I use an external power adapter or solar panel to power motherboard? = |
| |
1.1 | 9 | |
| 10 | |||
| |
11.2 | 11 | [[image:image-20220820141238-1.png]] [[image:image-20220820141238-2.png]] [[image:image-20220820141238-3.png]] |
| |
1.1 | 12 | |
| 13 | |||
| |
11.2 | 14 | ((( |
| |
13.1 | 15 | The motherboard of the equipment is equipped with an 8500mAh Battery by default. To set the LoRaWAN End Node to a short uplink interval such as 1 minutes uplink interval. This 8500mAh battery is not enough for long time use. |
| |
11.2 | 16 | ))) |
| |
1.1 | 17 | |
| 18 | |||
| |
11.2 | 19 | ((( |
| 20 | (% style="color:blue" %)**It is possible to power LSN50v2 or similar model via external Power. **(% style="color:red" %)**//There are two ways //:** | ||
| 21 | ))) | ||
| |
1.1 | 22 | |
| 23 | |||
| |
14.1 | 24 | == 1.1 Power it via external power (3.3v) and no need back up battery == |
| |
1.1 | 25 | |
| 26 | |||
| |
11.2 | 27 | As shown below, the motherboard is by default power by 8500mAh battery via the battery cable. |
| 28 | |||
| 29 | [[image:image-20220820141238-4.png]] | ||
| 30 | |||
| 31 | |||
 |
15.1 | 32 | User can remove the cable here and connect the (% style="color:blue" %)**external 3.3v DC power**(%%) to this connector. |
| |
11.2 | 33 | |
| |
15.1 | 34 | Recommand Spec for the power adapter: |
| 35 | |||
| 36 | * **Output: 3.0 ~~ 3.6v DC** | ||
| 37 | * **Output Current: >500mA** | ||
| 38 | |||
| 39 | (% style="display:none" %) | ||
| 40 | |||
| |
11.2 | 41 | Connector type is (% style="color:blue" %)**XH2.54 connector**(%%), So a match XH2.54 cable is ok. |
| 42 | |||
| 43 | |||
| 44 | [[image:image-20220820141238-5.png]] | ||
| 45 | |||
| 46 | |||
| 47 | Example photo for external 3.3v DC power** ( (% style="color:red" %)Need to cut the DC connector and wire it to XH2.54 cable, make sure the VCC and GND are not reverse)(%%)**(% style="color:red" %). | ||
| 48 | |||
| 49 | |||
| 50 | [[image:image-20220820141238-6.png]] | ||
| 51 | |||
| 52 | |||
| 53 | |||
| |
19.1 | 54 | == 1.2 Use the Dragino Solar Recharge Kit with external 5~~12v DC == |
| |
11.2 | 55 | |
| |
17.1 | 56 | [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/#H3.SolarPanel2B3000mAhLi-onbattery >>http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/#H3.SolarPanel2B3000mAhLi-onbattery]] |
| 57 | |||
| 58 | [[image:image-20240206191721-1.png]] | ||
| 59 | |||
| 60 | |||
| 61 | == 1.3 Power it via 12v solar panel and add rechargeable battery == | ||
| 62 | |||
| 63 | |||
| |
11.2 | 64 | Dragino has a recharge kit for this purpose. User can see this link for reference: |
| 65 | |||
| 66 | [[https:~~/~~/shop.dragino.com/index.php?rt=product/product&product_id=126>>url:https://shop.dragino.com/index.php?rt=product/product&product_id=126]] | ||
| 67 | |||
| 68 | [[image:image-20220820141238-7.png]] | ||
| 69 | |||
| 70 | |||
| |
17.1 | 71 | == 1.4 Water Proof Notice: == |
| |
11.2 | 72 | |
| |
12.2 | 73 | |
| |
11.2 | 74 | ((( |
| 75 | (% style="color:red" %)**Note: Both options mean an extra cable needs to pass throug the enclosure. In the current enclosure, the best is to drill a hole on the enclosure to pass and use glue to fill it for outdoor use purposes.** | ||
| |
12.2 | 76 | |
| 77 | |||
| |
11.2 | 78 | ))) |