Skip to Content

Wiki source code of BLE Bluetooth Remote Configure

Version 129.1 by Yi Wang on 2024/12/30 17:26
Show last authors
1 **Table of Contents:**
2
3 {{toc/}}
4
5
6
7
8 (% _msthidden="1" %)
9 = (% _msthash="819" _msthidden="1" _msttexthash="149552" %)1. Overview(%%) =
10
11
12 (% _msthash="818" _msthidden="1" _msttexthash="11994229" %)
13 There are some new models of Dragino sensors support BLE[[type the link label>>attach:DeviceTool_1.1.apk]] remote configure. User can use mobile phone to configure the sensor via BLE.
14
15
16 (% _msthidden="1" %)
17 = (% _msthash="817" _msthidden="1" _msttexthash="278239" %)2. Support Models(%%) =
18
19
20 (% _msthash="816" _msthidden="1" _msttexthash="3359837" %)
21 Here list the models that support BLE and the method to activate BLE function.
22
23 {{velocity}}
24 $xwiki.ssfx.use("js/xwiki/table/table.css")
25 $xwiki.jsfx.use("js/xwiki/table/tablefilterNsort.js", true)
26 {{/velocity}}
27
28 (% _msthidden="9" border="1" cellspacing="5" class="doOddEven filterable grid sortable" id="tableid" style="background-color:#f2f2f2; width:955px" %)
29 (% _msthidden="3" class="sortHeader" %)|=(% _msthash="806" _msthidden="1" _msttexthash="76765" style="width: 303px; background-color: rgb(217, 226, 243);" %)Models|=(% _msthash="807" _msthidden="1" _msttexthash="330434" style="width: 439px; background-color: rgb(217, 226, 243);" %)BLE Activate Method|=(% _msthash="808" _msthidden="1" _msttexthash="116701" style="width: 211px; background-color: rgb(217, 226, 243);" %)Comments
30 (% _msthidden="6" %)|(% _msthidden="1" style="width:303px" %)(% _msthidden="1" %)
31 (((
32 (% _msthash="809" _msthidden="1" _msttexthash="1183767" %)
33 All models with -LB, -LS , -NB, -NS, -CB, -CS suffix
34 )))|(% _msthidden="5" style="width:439px" %)(% _msthidden="5" %)
35 (((
36 (% _msthash="810" _msthidden="1" _msttexthash="2964052" %)
37 Device is battery power type and BLE will be only activate on below case:
38
39 (% _msthidden="1" %)
40 * Press button to send an uplink
41
42 (% _msthidden="1" %)
43 * Press button to active device.
44
45 (% _msthidden="1" %)
46 * Device Power on or reset.
47
48 (% _msthash="814" _msthidden="1" _msttexthash="6646042" %)
49 If there is no activity connection on BLE in 60 seconds, sensor will shut down BLE module to enter low power mode.
50 )))|(% style="width:211px" %)
51
52 (% _msthidden="1" %)
53 = (% _msthash="805" _msthidden="1" _msttexthash="251251" %)3. How to connect(%%) =
54
55 (% _msthidden="1" %)
56 == (% _msthash="804" _msthidden="1" _msttexthash="2234648" %)3.1 Use Dragino Device Tool to configure or upgrade firmware(%%) ==
57
58 (% _msthidden="1" %)
59 === (% _msthash="803" _msthidden="1" _msttexthash="353002" %)3.1.1 How to download(%%) ===
60
61
62 (% _msthash="802" _msthidden="1" _msttexthash="4840069" %)
63 Open the Google Play Store, search for "Devices.tool", download and install.
64
65 (% _msthidden="2" %)
66 [[image:image-20241230134826-1.png||height="292" width="514"]]
67
68
69 (% _msthidden="1" %)
70 === (% _msthash="800" _msthidden="1" _msttexthash="388687" %)3.1.2 How to use BLE to configure Sensors(%%) ===
71
72
73 (% _msthash="800" _msthidden="1" _msttexthash="388687" %)See Video Instruction: **[[Use BLE to configure Sensors>>https://youtube.com/shorts/Ajq2NvUslnw?feature=share]]**
74
75
76 (% _msthash="799" _msthidden="1" _msttexthash="25546196" %)
77 Install in mobile and run. Press the reset button of the device to be tested, and then click (% style="color:blue" %)**"SCAN BLUETOOTH DEVICES".**(%%) Find the correct device and connect(the correct device name should be the same as the DEV EUI of the device).
78
79 (% _msthidden="2" %)
80 [[image:image-20241230135129-4.png||height="134" width="502"]]
81
82 (% _msthidden="2" %)
83 [[image:image-20241230152054-8.png||height="241" width="504"]]
84
85
86 (% _msthash="798" _msthidden="1" _msttexthash="3894137" %)
87 After the connection is successful, enter the interface and click (% style="color:blue" %)**"DIALOGBOX".**
88
89
90 [[image:image-20241230151129-6.png||height="413" width="507"]]
91
92 (% _msthash="797" _msthidden="1" _msttexthash="7801690" %)
93 Each device has unique password named **AT PIN**. Input the password and you will be able to get access to the UART of the device.
94
95 (% _msthidden="2" %)
96 [[image:image-20241230152403-9.png||height="232" width="506"]]
97
98 (% _msthash="796" _msthidden="1" _msttexthash="10136945" %)
99 Enter AT PIN + line break in the dialog box, click (% style="color:blue" %)**"Send"**(%%), and return the data display (% style="color:blue" %)**"Password Correct"**(%%) to start configuring the AT command.
100
101 (% _msthidden="2" %)
102 [[image:image-20241230151602-7.png||height="568" width="348"]]
103
104
105 (% _msthidden="1" %)
106 (% style="color:red" %)**Note:**
107
108 (% _msthidden="1" %)
109 (% _msthash="794" _msthidden="1" _msttexthash="45456905" %)**Devices.Tool is now compatible with sending commands without line breaks, and supports the simultaneous configuration of multiple AT commands. A record is also automatically saved after an instruction is sent, and clicking on a command in the history will display it directly in the input box.**
110
111 (% _msthidden="2" %)
112 [[image:image-20241230153041-10.png||height="599" width="353"]]
113
114
115 (% _msthidden="1" %)
116 === (% _msthash="792" _msthidden="1" _msttexthash="626002" %)3.1.3 How to use Mobile Phone to upgrade firmware(%%) ===
117
118 (% _msthidden="1" %)
119 ==== (% _msthash="791" _msthidden="1" _msttexthash="227461" %)3.1.3.1 NB / CB series   ( Use BLE to upgrade firmware)(%%) ====
120
121
122 (% _msthash="800" _msthidden="1" _msttexthash="388687" %)See Video Instruction: [[Use BLE to Upgrade Firmware>>https://www.youtube.com/watch?v=fErXzc6m0gU]]
123
124 (% _msthidden="1" %)
125 (% id="cke_bm_120427S" style="display:none" %)
126
127 (% _msthidden="1" %)
128 Open the Devices Tool and click on (% _mstmutation="1" style="color:blue" %)**"Upgrade Device"**(%%).
129
130 (% _msthidden="2" %)
131 [[image:image-20241230153300-11.png||height="83" width="326"]]
132
133
134 (% _msthash="789" _msthidden="1" _msttexthash="858533" %)
135 Select the device type and click **"NB"**.
136
137 (% _msthidden="6" %)
138 [[image:image-20241230153410-12.png||height="184" width="322"]](% _msthash="788" _msthidden="1" _msttexthash="746473" title="Click and drag to resize" %)​
139
140 (% _msthidden="94" %)
141 (% id="cke_bm_120427E" style="display:none" %) (%%)
142
143 (% _msthash="784" _msthidden="1" _msttexthash="47162089" %)
144 Enter the IMEI (DEV EUI) of the upgraded device, enter the password (PIN), click "SELECT UPGRADE FILE" to find the file you want to upgrade, and then click "START". While waiting for the upgrade, let the device reset once. If it keeps stopping on the download screen, you can try pressing the reset button of your device.
145
146 (% _msthidden="1" %)
147 (% style="color:red" %)**Note: The password check function will only take effect if the DRAGINO NB bootloader is v1.3. If the version is earlier than 1.3, whether the password is entered correctly does not affect the NB upgrade.**
148
149 (% _msthidden="2" %)
150 [[image:image-20241230154001-13.png||height="381" width="327"]]
151
152
153 (% _msthash="781" _msthidden="1" _msttexthash="16138434" %)
154 In addition, the firmware upgrade supports importing the IMEI upgrade file, manually select the IMIE required in the file, and the password (PIN) will be entered automatically.
155
156 (% _msthidden="2" %)
157 [[image:image-20241230154747-14.png||height="695" width="324"]]
158
159
160 (% _msthash="779" _msthidden="1" _msttexthash="2791880" %)
161 When the upgrade is complete, it will prompt:"**updata successfully**".
162
163 [[image:image-20241230172614-19.png||height="428" width="322"]]
164
165
166 (% _msthidden="1" %)
167 ==== (% _msthash="777" _msthidden="1" _msttexthash="227097" %)3.1.3.2 LB series(%%) ====
168
169
170 (% _msthash="776" _msthidden="1" _msttexthash="2082054" %)
171 The LA66 USB connects to the phone via the USB-Type c adapter.
172
173 (% _msthidden="2" %)
174 [[image:image-20241207113056-9.png||_mstalt="431366" _msthash="775" _msthidden="A" height="240" width="555"]]
175
176
177 (% _msthash="774" _msthidden="1" _msttexthash="5487131" %)
178 After the connection is successful, the phone will pop up a prompt box, check it and click to confirm.
179
180 **Note:**
181
182 **Some mobile phone models need to manually enable the OTG function to properly identify external devices.**
183
184 (% _msthidden="2" %)
185 [[image:image-20241207114921-11.png||_mstalt="452192" _msthash="773" _msthidden="A" height="282" width="333"]]
186
187
188 (% _msthash="772" _msthidden="1" _msttexthash="5279781" class="wikigeneratedid" id="H-1" %)
189 Then, the LB upgrade interface of Device Tool will automatically open. Follow the steps in order:
190
191 (% _msthash="771" _msthidden="1" _msttexthash="1071018" class="wikigeneratedid" %)
192 ① Enter the DUIEI,
193
194 (% _msthash="770" _msthidden="1" _msttexthash="3167970" class="wikigeneratedid" %)
195 ② Enter the PIN (**the PIN is the last 8 bytes of APPSKEY**),
196
197 (% _msthash="769" _msthidden="1" _msttexthash="1417689" class="wikigeneratedid" %)
198 ③ Select the LoRa frequency,
199
200 (% _msthash="768" _msthidden="1" _msttexthash="1340859" class="wikigeneratedid" %)
201 ④ Choose the upgrade file,
202
203 (% _msthash="767" _msthidden="1" _msttexthash="12279657" class="wikigeneratedid" %)
204 ⑤ After pressing the device's reset button, click start.(If the upgrade does not start for a long time, you can press the device reset button again.)
205
206 (% _msthidden="2" %)
207 [[image:image-20241230155258-15.png||height="339" width="322"]]
208
209
210 (% _msthash="765" _msthidden="1" _msttexthash="2791880" class="wikigeneratedid" id="H-2" %)
211 When the upgrade is complete, it will prompt:"**updata successfully**".
212
213 [[image:image-20241230163315-18.png||height="443" width="328"]]
214
215 (% _msthidden="1" %)
216 === (% _msthash="763" _msthidden="1" _msttexthash="436423" %)3.1.4 How to export logs(%%) ===
217
218
219 (% _msthash="762" _msthidden="1" _msttexthash="2549469" %)
220 Open the Devices Tool and click the icon in the upper right corner.
221
222 (% _msthidden="2" %)
223 [[image:image-20241230155425-16.png||height="85" width="330"]]
224
225
226 (% _msthash="761" _msthidden="1" _msttexthash="11510694" %)
227 select the log you want to export, then click the share icon on the far right to enter the document that comes with your phone and choose to export it.
228
229 (% _msthidden="2" %)
230 [[image:image-20241230155528-17.png||height="324" width="327"]]
231
232
233 (% _msthidden="1" %)
234 == (% _msthash="760" _msthidden="1" _msttexthash="530101" %)3.2 How to use PC to connect?(%%) ==
235
236
237 (% _msthash="759" _msthidden="1" _msttexthash="1271491" %)
238 Firstly, a USB to Bluetooth host is required
239
240 (% _msthidden="2" %)
241 [[image:image-20230601152915-3.png||_mstalt="430144" _msthidden="A"]]
242
243
244 (% _msthidden="2" %)
245 [[image:image-20230601152950-4.png||_mstalt="430118" _msthidden="A"]]
246
247 (% _msthash="758" _msthidden="1" _msttexthash="1309451" %)
248 Insert the Bluetooth host into the computer
249
250 (% _msthidden="2" %)
251 [[image:image-20230518151327-5.png||_mstalt="431535" _msthidden="A"]]
252
253
254 (% _msthash="757" _msthidden="1" _msttexthash="1438853" %)
255 Open the serial port assistant on the computer
256
257 (% _msthidden="2" %)
258 [[image:image-20230518145316-3.png||_mstalt="431054" _msthidden="A" height="560" width="730"]]
259
260 (% _msthash="756" _msthidden="1" _msttexthash="4396743" %)
261 Then connect according to the operating instructions of the purchased Bluetooth host
262
263 (% _msthash="755" _msthidden="1" _msttexthash="19061640" %)
264 (be careful! The AT command in this description may be different from the AT command of the Bluetooth host you purchased. Please follow the instructions for the Bluetooth host you purchased)
265
266 (% _msthash="754" _msthidden="1" _msttexthash="1988116" %)
267 The Bluetooth name to be connected is the DEVEUI of the node
268
269 (% _msthidden="2" %)
270 [[image:image-20230518151444-6.png||_mstalt="431847" _msthidden="A"]]
271
272
273 (% _msthidden="1" %)
274 = (% _msthash="753" _msthidden="1" _msttexthash="668304" %)4. Access Password and Command(%%) =
275
276
277 (% _msthash="752" _msthidden="1" _msttexthash="6655389" %)
278 Each device is shipped with a label as below include (% style="color:blue" %)**6 chars AT PIN**(%%). this is the PIN to access the console of sensor.
279
280 (% _msthash="751" _msthidden="1" _msttexthash="2298829" %)
281 For AT Commands list please refer user manual for each sensor.
282
283 (% _msthidden="2" %)
284 [[image:image-20240204111711-2.png||_mstalt="426413" _msthidden="A"]]
285
286
287 (% _msthidden="1" %)
288 = (% _msthash="750" _msthidden="1" _msttexthash="1031914" %)5. Use MAC Bluetooth to connect to nodes(%%) =
289
290
291 (% _msthash="749" _msthidden="1" _msttexthash="1107314" %)
292 1.Download BLE terminal or BLE Device Info
293
294 (% _msthash="748" _msthidden="1" _msttexthash="423917" %)
295 2. Turn on MAC Bluetooth
296
297 (% _msthash="747" _msthidden="1" _msttexthash="3402854" %)
298 3.Open the Bluetooth tool, check the Bluetooth list, and find the device name
299
300 (% _msthidden="2" %)
301 [[image:image-20240802162132-1.png||_mstalt="427778" _msthidden="A" height="557" width="907"]]
302
303
304 (% _msthash="746" _msthidden="1" _msttexthash="5758103" %)
305 4.Click Connect, find the read/write window, and you can complete the communication with the device.
306
307 (% _msthidden="2" %)
308 [[image:image-20240802162318-2.png||_mstalt="430144" _msthidden="A" height="558" width="892"]]