Skip to Content

Wiki source code of BLE Bluetooth Remote Configure

Version 126.1 by Yi Wang on 2024/12/30 16:33
Hide last authors
Yi Wang 98.1 1 **Table of Contents:**
Xiaoling 8.2 2
Yi Wang 98.1 3 {{toc/}}
Xiaoling 37.1 4
Yi Wang 98.1 5
6
7
Yi Wang 95.2 8 (% _msthidden="1" %)
9 = (% _msthash="819" _msthidden="1" _msttexthash="149552" %)1. Overview(%%) =
Xiaoling 8.2 10
11
Yi Wang 95.2 12 (% _msthash="818" _msthidden="1" _msttexthash="11994229" %)
Yi Wang 85.2 13 There are some new models of Dragino sensors support BLE[[type the link label>>attach:DeviceTool_1.1.apk]] remote configure. User can use mobile phone to configure the sensor via BLE.
Edwin Chen 1.1 14
15
Yi Wang 95.2 16 (% _msthidden="1" %)
17 = (% _msthash="817" _msthidden="1" _msttexthash="278239" %)2. Support Models(%%) =
Edwin Chen 1.1 18
Xiaoling 8.2 19
Yi Wang 95.2 20 (% _msthash="816" _msthidden="1" _msttexthash="3359837" %)
Edwin Chen 1.1 21 Here list the models that support BLE and the method to activate BLE function.
22
23 {{velocity}}
24 $xwiki.ssfx.use("js/xwiki/table/table.css")
25 $xwiki.jsfx.use("js/xwiki/table/tablefilterNsort.js", true)
26 {{/velocity}}
27
Yi Wang 95.2 28 (% _msthidden="9" border="1" cellspacing="5" class="doOddEven filterable grid sortable" id="tableid" style="background-color:#f2f2f2; width:955px" %)
29 (% _msthidden="3" class="sortHeader" %)|=(% _msthash="806" _msthidden="1" _msttexthash="76765" style="width: 303px; background-color: rgb(217, 226, 243);" %)Models|=(% _msthash="807" _msthidden="1" _msttexthash="330434" style="width: 439px; background-color: rgb(217, 226, 243);" %)BLE Activate Method|=(% _msthash="808" _msthidden="1" _msttexthash="116701" style="width: 211px; background-color: rgb(217, 226, 243);" %)Comments
30 (% _msthidden="6" %)|(% _msthidden="1" style="width:303px" %)(% _msthidden="1" %)
31 (((
32 (% _msthash="809" _msthidden="1" _msttexthash="1183767" %)
Mengting Qiu 38.1 33 All models with -LB, -LS , -NB, -NS, -CB, -CS suffix
Yi Wang 95.2 34 )))|(% _msthidden="5" style="width:439px" %)(% _msthidden="5" %)
35 (((
36 (% _msthash="810" _msthidden="1" _msttexthash="2964052" %)
Edwin Chen 2.1 37 Device is battery power type and BLE will be only activate on below case:
38
Yi Wang 95.2 39 (% _msthidden="1" %)
Edwin Chen 2.1 40 * Press button to send an uplink
Xiaoling 8.2 41
Yi Wang 95.2 42 (% _msthidden="1" %)
Edwin Chen 2.1 43 * Press button to active device.
Xiaoling 8.2 44
Yi Wang 95.2 45 (% _msthidden="1" %)
Edwin Chen 2.1 46 * Device Power on or reset.
47
Yi Wang 95.2 48 (% _msthash="814" _msthidden="1" _msttexthash="6646042" %)
Edwin Chen 2.1 49 If there is no activity connection on BLE in 60 seconds, sensor will shut down BLE module to enter low power mode.
Xiaoling 33.1 50 )))|(% style="width:211px" %)
Edwin Chen 3.1 51
Yi Wang 95.2 52 (% _msthidden="1" %)
53 = (% _msthash="805" _msthidden="1" _msttexthash="251251" %)3. How to connect(%%) =
Edwin Chen 8.1 54
Yi Wang 95.2 55 (% _msthidden="1" %)
56 == (% _msthash="804" _msthidden="1" _msttexthash="2234648" %)3.1 Use Dragino Device Tool to configure or upgrade firmware(%%) ==
Xiaoling 8.2 57
Yi Wang 95.2 58 (% _msthidden="1" %)
59 === (% _msthash="803" _msthidden="1" _msttexthash="353002" %)3.1.1 How to download(%%) ===
Xiaoling 8.2 60
61
Yi Wang 95.2 62 (% _msthash="802" _msthidden="1" _msttexthash="4840069" %)
Yi Wang 123.1 63 Open the Google Play Store, search for "Devices.tool", download and install.
Edwin Chen 8.1 64
Yi Wang 95.2 65 (% _msthidden="2" %)
Yi Wang 123.1 66 [[image:image-20241230134826-1.png||height="292" width="514"]]
Edwin Chen 8.1 67
68
Yi Wang 95.2 69 (% _msthidden="1" %)
Edwin Chen 105.1 70 === (% _msthash="800" _msthidden="1" _msttexthash="388687" %)3.1.2 How to use BLE to configure Sensors(%%) ===
Edwin Chen 8.1 71
Xiaoling 103.1 72
Edwin Chen 105.1 73 (% _msthash="800" _msthidden="1" _msttexthash="388687" %)See Video Instruction: **[[Use BLE to configure Sensors>>https://youtube.com/shorts/Ajq2NvUslnw?feature=share]]**
74
75
Yi Wang 95.2 76 (% _msthash="799" _msthidden="1" _msttexthash="25546196" %)
Yi Wang 123.1 77 Install in mobile and run. Press the reset button of the device to be tested, and then click (% style="color:blue" %)**"SCAN BLUETOOTH DEVICES".**(%%) Find the correct device and connect(the correct device name should be the same as the DEV EUI of the device).
Edwin Chen 8.1 78
Yi Wang 95.2 79 (% _msthidden="2" %)
Yi Wang 123.1 80 [[image:image-20241230135129-4.png||height="134" width="502"]]
Yi Wang 55.2 81
Yi Wang 95.2 82 (% _msthidden="2" %)
Yi Wang 123.1 83 [[image:image-20241230152054-8.png||height="241" width="504"]]
Yi Wang 55.2 84
85
Yi Wang 95.2 86 (% _msthash="798" _msthidden="1" _msttexthash="3894137" %)
Yi Wang 123.1 87 After the connection is successful, enter the interface and click (% style="color:blue" %)**"DIALOGBOX".**
Yi Wang 55.2 88
89
Yi Wang 123.1 90 [[image:image-20241230151129-6.png||height="413" width="507"]]
Yi Wang 55.2 91
Yi Wang 95.2 92 (% _msthash="797" _msthidden="1" _msttexthash="7801690" %)
Edwin Chen 30.1 93 Each device has unique password named **AT PIN**. Input the password and you will be able to get access to the UART of the device.
Edwin Chen 8.1 94
Yi Wang 95.2 95 (% _msthidden="2" %)
Yi Wang 123.1 96 [[image:image-20241230152403-9.png||height="232" width="506"]]
Edwin Chen 30.1 97
Yi Wang 95.2 98 (% _msthash="796" _msthidden="1" _msttexthash="10136945" %)
Yi Wang 55.2 99 Enter AT PIN + line break in the dialog box, click (% style="color:blue" %)**"Send"**(%%), and return the data display (% style="color:blue" %)**"Password Correct"**(%%) to start configuring the AT command.
Edwin Chen 8.1 100
Yi Wang 95.2 101 (% _msthidden="2" %)
Yi Wang 123.1 102 [[image:image-20241230151602-7.png||height="568" width="348"]]
Yi Wang 55.2 103
Yi Wang 91.1 104
Yi Wang 95.2 105 (% _msthidden="1" %)
Xiaoling 103.1 106 (% style="color:red" %)**Note:**
Yi Wang 55.2 107
Yi Wang 95.2 108 (% _msthidden="1" %)
Yi Wang 123.1 109 (% _msthash="794" _msthidden="1" _msttexthash="45456905" %)**Devices.Tool is now compatible with sending commands without line breaks, and supports the simultaneous configuration of multiple AT commands. A record is also automatically saved after an instruction is sent, and clicking on a command in the history will display it directly in the input box.**
Yi Wang 55.2 110
Yi Wang 95.2 111 (% _msthidden="2" %)
Yi Wang 123.1 112 [[image:image-20241230153041-10.png||height="599" width="353"]]
Yi Wang 55.2 113
Yi Wang 85.2 114
Yi Wang 95.2 115 (% _msthidden="1" %)
Edwin Chen 105.1 116 === (% _msthash="792" _msthidden="1" _msttexthash="626002" %)3.1.3 How to use Mobile Phone to upgrade firmware(%%) ===
Yi Wang 55.2 117
Yi Wang 95.2 118 (% _msthidden="1" %)
Edwin Chen 105.1 119 ==== (% _msthash="791" _msthidden="1" _msttexthash="227461" %)3.1.3.1 NB / CB series   ( Use BLE to upgrade firmware)(%%) ====
Yi Wang 55.2 120
Xiaoling 103.1 121
Edwin Chen 105.1 122 (% _msthash="800" _msthidden="1" _msttexthash="388687" %)See Video Instruction: [[Use BLE to Upgrade Firmware>>https://www.youtube.com/watch?v=fErXzc6m0gU]]
123
Yi Wang 95.2 124 (% _msthidden="1" %)
Edwin Chen 105.1 125 (% id="cke_bm_120427S" style="display:none" %)
Yi Wang 55.2 126
Edwin Chen 105.1 127 (% _msthidden="1" %)
128 Open the Devices Tool and click on (% _mstmutation="1" style="color:blue" %)**"Upgrade Device"**(%%).
129
Yi Wang 95.2 130 (% _msthidden="2" %)
Yi Wang 123.1 131 [[image:image-20241230153300-11.png||height="83" width="326"]]
Yi Wang 55.2 132
133
Yi Wang 95.2 134 (% _msthash="789" _msthidden="1" _msttexthash="858533" %)
Xiaoling 103.1 135 Select the device type and click **"NB"**.
Yi Wang 91.1 136
Yi Wang 95.2 137 (% _msthidden="6" %)
Yi Wang 123.1 138 [[image:image-20241230153410-12.png||height="184" width="322"]](% _msthash="788" _msthidden="1" _msttexthash="746473" title="Click and drag to resize" %)​
Yi Wang 55.2 139
Yi Wang 95.2 140 (% _msthidden="94" %)
Yi Wang 85.2 141 (% id="cke_bm_120427E" style="display:none" %) (%%)
Yi Wang 55.2 142
Yi Wang 95.2 143 (% _msthash="784" _msthidden="1" _msttexthash="47162089" %)
Yi Wang 123.1 144 Enter the IMEI (DEV EUI) of the upgraded device, enter the password (PIN), click "SELECT UPGRADE FILE" to find the file you want to upgrade, and then click "START". While waiting for the upgrade, let the device reset once. If it keeps stopping on the download screen, you can try pressing the reset button of your device.
Yi Wang 85.2 145
Yi Wang 95.2 146 (% _msthidden="1" %)
Xiaoling 103.1 147 (% style="color:red" %)**Note: The password check function will only take effect if the DRAGINO NB bootloader is v1.3. If the version is earlier than 1.3, whether the password is entered correctly does not affect the NB upgrade.**
Yi Wang 85.2 148
Yi Wang 95.2 149 (% _msthidden="2" %)
Yi Wang 123.1 150 [[image:image-20241230154001-13.png||height="381" width="327"]]
Yi Wang 85.2 151
152
Yi Wang 95.2 153 (% _msthash="781" _msthidden="1" _msttexthash="16138434" %)
Yi Wang 85.2 154 In addition, the firmware upgrade supports importing the IMEI upgrade file, manually select the IMIE required in the file, and the password (PIN) will be entered automatically.
155
Yi Wang 95.2 156 (% _msthidden="2" %)
Yi Wang 123.1 157 [[image:image-20241230154747-14.png||height="695" width="324"]]
Yi Wang 85.2 158
159
Yi Wang 95.2 160 (% _msthash="779" _msthidden="1" _msttexthash="2791880" %)
Yi Wang 55.2 161 When the upgrade is complete, it will prompt:"**updata successfully**".
162
163
164
Yi Wang 95.2 165 (% _msthidden="1" %)
Xiaoling 104.1 166 ==== (% _msthash="777" _msthidden="1" _msttexthash="227097" %)3.1.3.2 LB series(%%) ====
Yi Wang 85.2 167
Xiaoling 103.1 168
Yi Wang 95.2 169 (% _msthash="776" _msthidden="1" _msttexthash="2082054" %)
Yi Wang 85.2 170 The LA66 USB connects to the phone via the USB-Type c adapter.
171
Yi Wang 95.2 172 (% _msthidden="2" %)
173 [[image:image-20241207113056-9.png||_mstalt="431366" _msthash="775" _msthidden="A" height="240" width="555"]]
Yi Wang 85.2 174
175
Yi Wang 95.2 176 (% _msthash="774" _msthidden="1" _msttexthash="5487131" %)
Yi Wang 123.1 177 After the connection is successful, the phone will pop up a prompt box, check it and click to confirm.
Yi Wang 85.2 178
Yi Wang 123.1 179 **Note:**
180
181 **Some mobile phone models need to manually enable the OTG function to properly identify external devices.**
182
Yi Wang 95.2 183 (% _msthidden="2" %)
184 [[image:image-20241207114921-11.png||_mstalt="452192" _msthash="773" _msthidden="A" height="282" width="333"]]
Yi Wang 85.2 185
Yi Wang 90.1 186
Yi Wang 95.2 187 (% _msthash="772" _msthidden="1" _msttexthash="5279781" class="wikigeneratedid" id="H-1" %)
Yi Wang 90.1 188 Then, the LB upgrade interface of Device Tool will automatically open. Follow the steps in order:
189
Yi Wang 95.2 190 (% _msthash="771" _msthidden="1" _msttexthash="1071018" class="wikigeneratedid" %)
Yi Wang 90.1 191 ① Enter the DUIEI,
Yi Wang 86.1 192
Yi Wang 95.2 193 (% _msthash="770" _msthidden="1" _msttexthash="3167970" class="wikigeneratedid" %)
Yi Wang 102.1 194 ② Enter the PIN (**the PIN is the last 8 bytes of APPSKEY**),
Yi Wang 86.1 195
Yi Wang 95.2 196 (% _msthash="769" _msthidden="1" _msttexthash="1417689" class="wikigeneratedid" %)
Yi Wang 90.1 197 ③ Select the LoRa frequency,
198
Yi Wang 95.2 199 (% _msthash="768" _msthidden="1" _msttexthash="1340859" class="wikigeneratedid" %)
Yi Wang 90.1 200 ④ Choose the upgrade file,
201
Yi Wang 95.2 202 (% _msthash="767" _msthidden="1" _msttexthash="12279657" class="wikigeneratedid" %)
Yi Wang 90.1 203 ⑤ After pressing the device's reset button, click start.(If the upgrade does not start for a long time, you can press the device reset button again.)
204
Yi Wang 95.2 205 (% _msthidden="2" %)
Yi Wang 123.1 206 [[image:image-20241230155258-15.png||height="339" width="322"]]
Yi Wang 90.1 207
208
Yi Wang 95.2 209 (% _msthash="765" _msthidden="1" _msttexthash="2791880" class="wikigeneratedid" id="H-2" %)
Yi Wang 90.1 210 When the upgrade is complete, it will prompt:"**updata successfully**".
211
212
Yi Wang 95.2 213 (% _msthidden="1" %)
214 === (% _msthash="763" _msthidden="1" _msttexthash="436423" %)3.1.4 How to export logs(%%) ===
Yi Wang 55.2 215
Xiaoling 103.1 216
Yi Wang 95.2 217 (% _msthash="762" _msthidden="1" _msttexthash="2549469" %)
Yi Wang 55.2 218 Open the Devices Tool and click the icon in the upper right corner.
219
Yi Wang 95.2 220 (% _msthidden="2" %)
Yi Wang 123.1 221 [[image:image-20241230155425-16.png||height="85" width="330"]]
Yi Wang 55.2 222
223
Yi Wang 95.2 224 (% _msthash="761" _msthidden="1" _msttexthash="11510694" %)
Yi Wang 55.2 225 select the log you want to export, then click the share icon on the far right to enter the document that comes with your phone and choose to export it.
226
Yi Wang 95.2 227 (% _msthidden="2" %)
Yi Wang 123.1 228 [[image:image-20241230155528-17.png||height="324" width="327"]]
Yi Wang 55.2 229
230
Yi Wang 95.2 231 (% _msthidden="1" %)
232 == (% _msthash="760" _msthidden="1" _msttexthash="530101" %)3.2 How to use PC to connect?(%%) ==
Edwin Chen 11.1 233
Xiaoling 25.2 234
Yi Wang 95.2 235 (% _msthash="759" _msthidden="1" _msttexthash="1271491" %)
Herong Lu 19.1 236 Firstly, a USB to Bluetooth host is required
237
Yi Wang 95.2 238 (% _msthidden="2" %)
239 [[image:image-20230601152915-3.png||_mstalt="430144" _msthidden="A"]]
Herong Lu 19.1 240
241
Yi Wang 95.2 242 (% _msthidden="2" %)
243 [[image:image-20230601152950-4.png||_mstalt="430118" _msthidden="A"]]
Xiaoling 25.2 244
Yi Wang 95.2 245 (% _msthash="758" _msthidden="1" _msttexthash="1309451" %)
Herong Lu 19.1 246 Insert the Bluetooth host into the computer
247
Yi Wang 95.2 248 (% _msthidden="2" %)
249 [[image:image-20230518151327-5.png||_mstalt="431535" _msthidden="A"]]
Herong Lu 19.1 250
Xiaoling 25.2 251
Yi Wang 95.2 252 (% _msthash="757" _msthidden="1" _msttexthash="1438853" %)
Herong Lu 19.1 253 Open the serial port assistant on the computer
254
Yi Wang 95.2 255 (% _msthidden="2" %)
256 [[image:image-20230518145316-3.png||_mstalt="431054" _msthidden="A" height="560" width="730"]]
Herong Lu 19.1 257
Yi Wang 95.2 258 (% _msthash="756" _msthidden="1" _msttexthash="4396743" %)
Herong Lu 19.1 259 Then connect according to the operating instructions of the purchased Bluetooth host
260
Yi Wang 95.2 261 (% _msthash="755" _msthidden="1" _msttexthash="19061640" %)
Herong Lu 19.1 262 (be careful! The AT command in this description may be different from the AT command of the Bluetooth host you purchased. Please follow the instructions for the Bluetooth host you purchased)
263
Yi Wang 95.2 264 (% _msthash="754" _msthidden="1" _msttexthash="1988116" %)
Herong Lu 19.1 265 The Bluetooth name to be connected is the DEVEUI of the node
266
Yi Wang 95.2 267 (% _msthidden="2" %)
268 [[image:image-20230518151444-6.png||_mstalt="431847" _msthidden="A"]]
Edwin Chen 21.1 269
270
Yi Wang 95.2 271 (% _msthidden="1" %)
272 = (% _msthash="753" _msthidden="1" _msttexthash="668304" %)4. Access Password and Command(%%) =
Edwin Chen 21.1 273
274
Yi Wang 95.2 275 (% _msthash="752" _msthidden="1" _msttexthash="6655389" %)
Xiaoling 25.2 276 Each device is shipped with a label as below include (% style="color:blue" %)**6 chars AT PIN**(%%). this is the PIN to access the console of sensor.
277
Yi Wang 95.2 278 (% _msthash="751" _msthidden="1" _msttexthash="2298829" %)
Edwin Chen 21.1 279 For AT Commands list please refer user manual for each sensor.
280
Yi Wang 95.2 281 (% _msthidden="2" %)
282 [[image:image-20240204111711-2.png||_mstalt="426413" _msthidden="A"]]
Bei Jinggeng 36.1 283
284
Yi Wang 95.2 285 (% _msthidden="1" %)
286 = (% _msthash="750" _msthidden="1" _msttexthash="1031914" %)5.Use MAC Bluetooth to connect to nodes(%%) =
Bei Jinggeng 36.1 287
Xiaoling 37.1 288
Yi Wang 95.2 289 (% _msthash="749" _msthidden="1" _msttexthash="1107314" %)
Bei Jinggeng 36.1 290 1.Download BLE terminal or BLE Device Info
291
Yi Wang 95.2 292 (% _msthash="748" _msthidden="1" _msttexthash="423917" %)
Bei Jinggeng 36.1 293 2. Turn on MAC Bluetooth
294
Yi Wang 95.2 295 (% _msthash="747" _msthidden="1" _msttexthash="3402854" %)
Bei Jinggeng 36.1 296 3.Open the Bluetooth tool, check the Bluetooth list, and find the device name
297
Yi Wang 95.2 298 (% _msthidden="2" %)
299 [[image:image-20240802162132-1.png||_mstalt="427778" _msthidden="A" height="557" width="907"]]
Bei Jinggeng 36.1 300
Yi Wang 95.2 301 (% _msthash="746" _msthidden="1" _msttexthash="5758103" %)
Bei Jinggeng 36.1 302 4.Click Connect, find the read/write window, and you can complete the communication with the device.
303
Yi Wang 95.2 304 (% _msthidden="2" %)
305 [[image:image-20240802162318-2.png||_mstalt="430144" _msthidden="A" height="558" width="892"]]