Wiki source code of BC660-GL module FOTA upgrade firmware
Hide last authors
| author | version | line-number | content |
|---|---|---|---|
 |
6.2 | 1 | |
| 2 | |||
| 3 | The current firmware for all BC660-GL modules is: BC660KGLAAR01A05 01.002.01.002 | ||
| 4 | The latest firmware upgrade is: BC660KGLAAR01A05_01.203.01.203 | ||
| 5 | You can use the AT+QGMR command to query the firmware version | ||
| 6 | The method to upgrade the firmware of the NB module is as follows: | ||
| 7 | ~1. First, completely erase the program of the NBST module. | ||
| 8 | 2. The NB module needs to insert a SIM card and ensure network connectivity. | ||
| 9 | 3. Use TTL-USB serial port tool to connect TX and RX, GND of NBST, | ||
| 10 | |||
| 11 | [[image:1720682410182-594.png]] | ||
| 12 | |||
| 13 | |||
| 14 | [[image:1720682422086-684.png]] | ||
| 15 | |||
| 16 | |||
| 17 | [[image:1720682438315-576.png]] | ||
| 18 | No welding is required, just touch it with DuPont wire. | ||
| 19 | 4. The device needs to be powered on, open the serial port debugging tool, connect the COM of the USB serial port with a baud rate of 115200, and then perform FOTA firmware upgrade. | ||
| 20 | 5. After opening the serial port, send the AT+QIDNSCFG=0, "223.5.5.5", "8.8.8.8" commands and return OK | ||
| 21 | Send AT+QFOTADL again= http:~/~/repo.dragino.com/release/NB/Update_BC660KGLAAR01A05_01.002.01.002-R01A05_01.203.01.203.zip command | ||
| 22 | The device is starting to upgrade firmware, as shown in the following figure: | ||
| 23 | |||
| 24 | [[image:1720682486714-234.png]] | ||
| 25 | |||
| 26 | |||
| 27 | Successfully upgrading firmware will prompt the following message: | ||
| 28 | |||
| 29 | [[image:1720682517629-407.png]] | ||
| 30 | The firmware upgrade was successful. | ||
| 31 | |||
| 32 | |||
| 33 | You can use AT+QGMR to check the firmware version | ||
| 34 | |||
| 35 | [[image:1720682568103-178.png]] |