Summary

• Page properties (3 modified, 0 added, 0 removed)

Details

Page properties

Title

...	...	@@ -1,1 +1,0 @@
1		-BC660-GL module FOTA upgrade firmware

Parent

...	...	@@ -1,1 +1,0 @@
1		-Main.WebHome

Content

...	...	@@ -1,60 +1,0 @@
1		-**Table of Contents: **
2		-
3		-{{toc/}}
4		-
5		-
6		-
7		-
8		-= 1. Overview =
9		-
10		-
11		-The current firmware for all BC660-GL modules is: (% style="color:blue" %)**BC660KGLAAR01A05 01.002.01.002**
12		-
13		-The latest firmware upgrade is: (% style="color:blue" %)**BC660KGLAAR01A05_01.203.01.203**
14		-
15		-You can use the (% style="color:blue" %)**AT+QGMR**(%%) command to query the firmware version.
16		-
17		-
18		-= 2. The method to upgrade the firmware of the NB module is as follows: =
19		-
20		-
21		-(% style="color:blue" %)**Step 1:**(%%) First, completely erase the program of the NBST module.
22		-
23		-
24		-(% style="color:blue" %)**Step 2:**(%%) The NB module needs to insert a SIM card and ensure network connectivity.
25		-
26		-
27		-(% style="color:blue" %)**Step 3:**(%%) Use TTL-USB serial port tool to connect TX and RX, GND of NBST,
28		-
29		-[[image:1720682410182-594.png]]
30		-
31		-
32		-[[image:1720682422086-684.png]]
33		-
34		-
35		-[[image:1720682438315-576.png]]
36		-No welding is required, just touch it with DuPont wire.
37		-
38		-
39		-(% style="color:blue" %)**Step 4:**(%%) The device needs to be powered on, open the serial port debugging tool, connect the COM of the USB serial port with a baud rate of 115200, and then perform FOTA firmware upgrade.
40		-
41		-
42		-(% style="color:blue" %)**Step 5:**(%%) After opening the serial port, send the (% style="color:#037691" %)**AT+QIDNSCFG=0, "223.5.5.5", "8.8.8.8"**(%%) commands,  return OK.
43		-
44		-Send (% style="color:#037691" %)**AT+QFOTADL again= http:~/~/repo.dragino.com/release/NB/Update_BC660KGLAAR01A05_01.002.01.002-R01A05_01.203.01.203.zip**(%%) command,
45		-The device is starting to upgrade firmware, as shown in the following figure:
46		-
47		-[[image:1720682486714-234.png]]
48		-
49		-
50		-Successfully upgrading firmware will prompt the following message:
51		-
52		-[[image:1720682517629-407.png]]
53		-The firmware upgrade was successful.
54		-
55		-
56		-You can use (% style="color:#037691" %)**AT+QGMR** (%%)to check the firmware version.
57		-
58		-[[image:1720682568103-178.png]]
59		-
60		-