<
From version < 6.5 >
edited by Xiaoling
on 2024/07/11 15:40
To version < 6.1 >
edited by Xiaoling
on 2024/07/11 15:22
>
Change comment: Uploaded new attachment "1720682568103-178.png", version {1}

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,0 @@
1 -BC660-GL module FOTA upgrade firmware
Parent
... ... @@ -1,1 +1,0 @@
1 -Main.WebHome
Content
... ... @@ -1,55 +1,0 @@
1 -**Table of Contents: **
2 -
3 -{{toc/}}
4 -
5 -
6 -= 1. Overview =
7 -
8 -
9 -The current firmware for all BC660-GL modules is: (% style="color:blue" %)**BC660KGLAAR01A05 01.002.01.002**
10 -The latest firmware upgrade is: (% style="color:blue" %)**BC660KGLAAR01A05_01.203.01.203**
11 -You can use the (% style="color:blue" %)**AT+QGMR**(%%) command to query the firmware version.
12 -
13 -=
14 -2. The method to upgrade the firmware of the NB module is as follows: =
15 -
16 -
17 -**Step 1:** First, completely erase the program of the NBST module.
18 -
19 -
20 -**Step 2:** The NB module needs to insert a SIM card and ensure network connectivity.
21 -
22 -
23 -**Step 3:** Use TTL-USB serial port tool to connect TX and RX, GND of NBST,
24 -
25 -[[image:1720682410182-594.png]]
26 -
27 -
28 -[[image:1720682422086-684.png]]
29 -
30 -
31 -[[image:1720682438315-576.png]]
32 -No welding is required, just touch it with DuPont wire.
33 -
34 -
35 -**Step 4:** The device needs to be powered on, open the serial port debugging tool, connect the COM of the USB serial port with a baud rate of 115200, and then perform FOTA firmware upgrade.
36 -
37 -
38 -**Step 5:** After opening the serial port, send the **AT+QIDNSCFG=0, "223.5.5.5", "8.8.8.8"** commands,  return OK.
39 -Send **AT+QFOTADL again= http:~/~/repo.dragino.com/release/NB/Update_BC660KGLAAR01A05_01.002.01.002-R01A05_01.203.01.203.zip** command,
40 -The device is starting to upgrade firmware, as shown in the following figure:
41 -
42 -[[image:1720682486714-234.png]]
43 -
44 -
45 -Successfully upgrading firmware will prompt the following message:
46 -
47 -[[image:1720682517629-407.png]]
48 -The firmware upgrade was successful.
49 -
50 -
51 -You can use **AT+QGMR** to check the firmware version.
52 -
53 -[[image:1720682568103-178.png]]
54 -
55 -
Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0