Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -1,27 +1,13 @@
1		-**Table of Contents: **
	1	+
2	2
3		-{{toc/}}
	3	+The current firmware for all BC660-GL modules is: BC660KGLAAR01A05 01.002.01.002
	4	+The latest firmware upgrade is: BC660KGLAAR01A05_01.203.01.203
	5	+You can use the AT+QGMR command to query the firmware version
	6	+The method to upgrade the firmware of the NB module is as follows:
	7	+~1. First, completely erase the program of the NBST module.
	8	+2. The NB module needs to insert a SIM card and ensure network connectivity.
	9	+3. Use TTL-USB serial port tool to connect TX and RX, GND of NBST,
4	4
5		-
6		-= 1. Overview =
7		-
8		-
9		-The current firmware for all BC660-GL modules is: **BC660KGLAAR01A05 01.002.01.002**
10		-The latest firmware upgrade is: **BC660KGLAAR01A05_01.203.01.203**
11		-You can use the **AT+QGMR** command to query the firmware version.
12		-
13		-=
14		-2. The method to upgrade the firmware of the NB module is as follows: =
15		-
16		-
17		-**Step 1:** First, completely erase the program of the NBST module.
18		-
19		-
20		-**Step 2:** The NB module needs to insert a SIM card and ensure network connectivity.
21		-
22		-
23		-**Step 3:** Use TTL-USB serial port tool to connect TX and RX, GND of NBST,
24		-
25	25	[[image:1720682410182-594.png]]
26	26
27	27
...	...	@@ -30,13 +30,9 @@
30	30
31	31	[[image:1720682438315-576.png]]
32	32	No welding is required, just touch it with DuPont wire.
33		-
34		-
35		-**Step 4:** The device needs to be powered on, open the serial port debugging tool, connect the COM of the USB serial port with a baud rate of 115200, and then perform FOTA firmware upgrade.
36		-
37		-
38		-**Step 5:** After opening the serial port, send the **AT+QIDNSCFG=0, "223.5.5.5", "8.8.8.8"** commands,  return OK.
39		-Send **AT+QFOTADL again= http:~/~/repo.dragino.com/release/NB/Update_BC660KGLAAR01A05_01.002.01.002-R01A05_01.203.01.203.zip** command,
	19	+4. The device needs to be powered on, open the serial port debugging tool, connect the COM of the USB serial port with a baud rate of 115200, and then perform FOTA firmware upgrade.
	20	+5. After opening the serial port, send the AT+QIDNSCFG=0, "223.5.5.5", "8.8.8.8" commands and return OK
	21	+Send AT+QFOTADL again= http:~/~/repo.dragino.com/release/NB/Update_BC660KGLAAR01A05_01.002.01.002-R01A05_01.203.01.203.zip command
40	40	The device is starting to upgrade firmware, as shown in the following figure:
41	41
42	42	[[image:1720682486714-234.png]]
...	...	@@ -48,8 +48,6 @@
48	48	The firmware upgrade was successful.
49	49
50	50
51		-You can use **AT+QGMR** to check the firmware version.
	33	+You can use AT+QGMR to check the firmware version
52	52
53	53	[[image:1720682568103-178.png]]
54		-
55		-