Summary

• Page properties (3 modified, 0 added, 0 removed)

Details

Page properties

Title

...	...	@@ -1,0 +1,1 @@
	1	+BC660-GL module FOTA upgrade firmware

Parent

...	...	@@ -1,0 +1,1 @@
	1	+Main.WebHome

Content

...	...	@@ -1,0 +1,58 @@
	1	+**Table of Contents: **
	2	+
	3	+{{toc/}}
	4	+
	5	+
	6	+= 1. Overview =
	7	+
	8	+
	9	+The current firmware for all BC660-GL modules is: (% style="color:blue" %)**BC660KGLAAR01A05 01.002.01.002**
	10	+
	11	+The latest firmware upgrade is: (% style="color:blue" %)**BC660KGLAAR01A05_01.203.01.203**
	12	+
	13	+You can use the (% style="color:blue" %)**AT+QGMR**(%%) command to query the firmware version.
	14	+
	15	+
	16	+= 2. The method to upgrade the firmware of the NB module is as follows: =
	17	+
	18	+
	19	+(% style="color:blue" %)**Step 1:**(%%) First, completely erase the program of the NBST module.
	20	+
	21	+
	22	+(% style="color:blue" %)**Step 2:**(%%) The NB module needs to insert a SIM card and ensure network connectivity.
	23	+
	24	+
	25	+(% style="color:blue" %)**Step 3:**(%%) Use TTL-USB serial port tool to connect TX and RX, GND of NBST,
	26	+
	27	+[[image:1720682410182-594.png]]
	28	+
	29	+
	30	+[[image:1720682422086-684.png]]
	31	+
	32	+
	33	+[[image:1720682438315-576.png]]
	34	+No welding is required, just touch it with DuPont wire.
	35	+
	36	+
	37	+(% style="color:blue" %)**Step 4:**(%%) The device needs to be powered on, open the serial port debugging tool, connect the COM of the USB serial port with a baud rate of 115200, and then perform FOTA firmware upgrade.
	38	+
	39	+
	40	+(% style="color:blue" %)**Step 5:**(%%) After opening the serial port, send the (% style="color:#037691" %)**AT+QIDNSCFG=0, "223.5.5.5", "8.8.8.8"**(%%) commands,  return OK.
	41	+
	42	+Send (% style="color:#037691" %)**AT+QFOTADL again= http:~/~/repo.dragino.com/release/NB/Update_BC660KGLAAR01A05_01.002.01.002-R01A05_01.203.01.203.zip**(%%) command,
	43	+The device is starting to upgrade firmware, as shown in the following figure:
	44	+
	45	+[[image:1720682486714-234.png]]
	46	+
	47	+
	48	+Successfully upgrading firmware will prompt the following message:
	49	+
	50	+[[image:1720682517629-407.png]]
	51	+The firmware upgrade was successful.
	52	+
	53	+
	54	+You can use (% style="color:#037691" %)**AT+QGMR** (%%)to check the firmware version.
	55	+
	56	+[[image:1720682568103-178.png]]
	57	+
	58	+