<
From version < 6.1 >
edited by Xiaoling
on 2024/07/11 15:22
To version < 6.5 >
edited by Xiaoling
on 2024/07/11 15:40
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,0 +1,1 @@
1 +BC660-GL module FOTA upgrade firmware
Parent
... ... @@ -1,0 +1,1 @@
1 +Main.WebHome
Content
... ... @@ -1,0 +1,55 @@
1 +**Table of Contents: **
2 +
3 +{{toc/}}
4 +
5 +
6 += 1. Overview =
7 +
8 +
9 +The current firmware for all BC660-GL modules is: (% style="color:blue" %)**BC660KGLAAR01A05 01.002.01.002**
10 +The latest firmware upgrade is: (% style="color:blue" %)**BC660KGLAAR01A05_01.203.01.203**
11 +You can use the (% style="color:blue" %)**AT+QGMR**(%%) command to query the firmware version.
12 +
13 +=
14 +2. The method to upgrade the firmware of the NB module is as follows: =
15 +
16 +
17 +**Step 1:** First, completely erase the program of the NBST module.
18 +
19 +
20 +**Step 2:** The NB module needs to insert a SIM card and ensure network connectivity.
21 +
22 +
23 +**Step 3:** Use TTL-USB serial port tool to connect TX and RX, GND of NBST,
24 +
25 +[[image:1720682410182-594.png]]
26 +
27 +
28 +[[image:1720682422086-684.png]]
29 +
30 +
31 +[[image:1720682438315-576.png]]
32 +No welding is required, just touch it with DuPont wire.
33 +
34 +
35 +**Step 4:** The device needs to be powered on, open the serial port debugging tool, connect the COM of the USB serial port with a baud rate of 115200, and then perform FOTA firmware upgrade.
36 +
37 +
38 +**Step 5:** After opening the serial port, send the **AT+QIDNSCFG=0, "223.5.5.5", "8.8.8.8"** commands,  return OK.
39 +Send **AT+QFOTADL again= http:~/~/repo.dragino.com/release/NB/Update_BC660KGLAAR01A05_01.002.01.002-R01A05_01.203.01.203.zip** command,
40 +The device is starting to upgrade firmware, as shown in the following figure:
41 +
42 +[[image:1720682486714-234.png]]
43 +
44 +
45 +Successfully upgrading firmware will prompt the following message:
46 +
47 +[[image:1720682517629-407.png]]
48 +The firmware upgrade was successful.
49 +
50 +
51 +You can use **AT+QGMR** to check the firmware version.
52 +
53 +[[image:1720682568103-178.png]]
54 +
55 +
Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0