Summary

• Page properties (3 modified, 0 added, 0 removed)
• Attachments (0 modified, 1 added, 0 removed)
  • 1720682568103-178.png

Details

Page properties

Title

...	...	@@ -1,0 +1,1 @@
	1	+BC660-GL module FOTA upgrade firmware

Parent

...	...	@@ -1,0 +1,1 @@
	1	+Main.WebHome

Content

...	...	@@ -1,0 +1,35 @@
	1	+
	2	+
	3	+The current firmware for all BC660-GL modules is: BC660KGLAAR01A05 01.002.01.002
	4	+The latest firmware upgrade is: BC660KGLAAR01A05_01.203.01.203
	5	+You can use the AT+QGMR command to query the firmware version
	6	+The method to upgrade the firmware of the NB module is as follows:
	7	+~1. First, completely erase the program of the NBST module.
	8	+2. The NB module needs to insert a SIM card and ensure network connectivity.
	9	+3. Use TTL-USB serial port tool to connect TX and RX, GND of NBST,
	10	+
	11	+[[image:1720682410182-594.png]]
	12	+
	13	+
	14	+[[image:1720682422086-684.png]]
	15	+
	16	+
	17	+[[image:1720682438315-576.png]]
	18	+No welding is required, just touch it with DuPont wire.
	19	+4. The device needs to be powered on, open the serial port debugging tool, connect the COM of the USB serial port with a baud rate of 115200, and then perform FOTA firmware upgrade.
	20	+5. After opening the serial port, send the AT+QIDNSCFG=0, "223.5.5.5", "8.8.8.8" commands and return OK
	21	+Send AT+QFOTADL again= http:~/~/repo.dragino.com/release/NB/Update_BC660KGLAAR01A05_01.002.01.002-R01A05_01.203.01.203.zip command
	22	+The device is starting to upgrade firmware, as shown in the following figure:
	23	+
	24	+[[image:1720682486714-234.png]]
	25	+
	26	+
	27	+Successfully upgrading firmware will prompt the following message:
	28	+
	29	+[[image:1720682517629-407.png]]
	30	+The firmware upgrade was successful.
	31	+
	32	+
	33	+You can use AT+QGMR to check the firmware version
	34	+
	35	+[[image:1720682568103-178.png]]

1720682568103-178.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+12.3 KB

Content