Last modified by Karry Zhuang on 2024/07/11 11:58
<
From version < 57.4 >
edited by Xiaoling
on 2022/06/01 14:43
To version < 60.7 >
edited by Xiaoling
on 2022/09/19 16:08
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,5 +1,4 @@
1 -(% class="wikigeneratedid" %)
2 - **Contents:**
1 +**Table of Contents:**
3 3  
4 4  {{toc/}}
5 5  
... ... @@ -10,13 +10,17 @@
10 10  
11 11  = **1. Introduction** =
12 12  
12 +
13 13  This article provide the examples for RS485-LN to connect to different type of RS485 sensors.
14 14  
15 15  
16 +
16 16  == **1.1 Example 1: Connect to Leak relay and VFD** ==
17 17  
19 +
18 18  This instruction is provided by Xavier Florensa Berenguer from [[NORIA GRUPO DE COMPRAS>>url:http://www.gruponovelec.com/]]. It is to show how to use RS485-LN to connect to Relay and VFD and communicate with Mobile. The structure is like below:
19 19  
22 +
20 20  [[image:image-20220527091852-1.png]]
21 21  
22 22  Connection
... ... @@ -28,17 +28,21 @@
28 28  Connection
29 29  
30 30  
31 -Related documents:
34 +(% style="color:blue" %)**Related documents:**
32 32  
33 -* [[Solar Pump with Dragino>>url:http://www.dragino.com/downloads/index.php?dir=RS485-LN/Application_Note/Relay_VFD/]] : System Structure
34 -* [[Configure Manual>>url:http://www.dragino.com/downloads/index.php?dir=RS485-LN/Application_Note/Relay_VFD/]] : Explanation on how to integrate to Node-red and to the Mobile Phone, and with link to the Github code.
36 +* System Structure:  [[Solar Pump with Dragino>>url:http://www.dragino.com/downloads/index.php?dir=RS485-LN/Application_Note/Relay_VFD/||_mstmutation="1" style="background-color: rgb(255, 255, 255);"]]
37 +* Explanation on how to integrate to Node-red and to the Mobile Phone, and with link to the Github code:  [[Configure Manual>>url:http://www.dragino.com/downloads/index.php?dir=RS485-LN/Application_Note/Relay_VFD/||_mstmutation="1" style="background-color: rgb(255, 255, 255);"]]
35 35  * [[Video Demo>>url:https://www.youtube.com/watch?v=TAFZ5eaf-MY&t=6s&ab_channel=XavierFlorensaBerenguer]]
36 36  
37 37  
41 +
42 +
38 38  == **1.2 Example 2: Connect to Pulse Counter** ==
39 39  
45 +
40 40  This instruction is provided by Xavier Florensa Berenguer from [[NORIA GRUPO DE COMPRAS>>url:http://www.gruponovelec.com/]]. It is to show how to use RS485-LN to connect to Pulse Counter and communicate with Mobile. This example and example 2 compose the structure for a farm IoT solution. The structure is like below:
41 41  
48 +
42 42  [[image:image-20220527092058-3.png]]
43 43  
44 44  Connection
... ... @@ -50,21 +50,28 @@
50 50  Connection
51 51  
52 52  
53 -* [[Pickdata MIO40 water pulse counter to LoRa with Dragino RS485-LN>>url:http://www.dragino.com/downloads/index.php?dir=RS485-LN/Application_Note/Pulse-Counter/]] : Configure Document
60 +(% style="color:blue" %)**Related documents:**
61 +
62 +* Configure Document:  [[Pickdata MIO40 water pulse counter to LoRa with Dragino RS485-LN>>url:http://www.dragino.com/downloads/index.php?dir=RS485-LN/Application_Note/Pulse-Counter/||_mstmutation="1"]]
54 54  * [[Dragino Solution in Farm>>url:http://www.dragino.com/downloads/index.php?dir=RS485-LN/Application_Note/&file=Dragino%20on%20Farms.pptx]]
55 55  
56 -== ==
57 57  
66 +
67 +
58 58  == **1.3 Example3: Use RS485-LN with energy meters** ==
59 59  
70 +
60 60  === **1.3.1 OverView** ===
61 61  
73 +
62 62  (((
63 -**Note**：The specifications of each energy meter are different, please refer to your own energy meter specifications.
75 +(% style="color:red" %)**Note**：**The specifications of each energy meter are different, please refer to your own energy meter specifications.**
64 64  )))
65 65  
66 66  (((
67 67  This example describes a single-phase meter.This is the connection between the RS485-LN and the energy meter.
80 +
81 +
68 68  )))
69 69  
70 70  [[image:image-20220527092419-5.png]]
... ... @@ -74,7 +74,9 @@
74 74  
75 75  
76 76  (((
77 -How to connect with Energy Meter：
91 +(% style="color:blue" %)**How to connect with Energy Meter：**
92 +
93 +
78 78  )))
79 79  
80 80  (((
... ... @@ -95,6 +95,8 @@
95 95  
96 96  (((
97 97  Once there is power, the RS485-LN will be on.
114 +
115 +
98 98  )))
99 99  
100 100  [[image:image-20220527092514-6.png]]
... ... @@ -108,17 +108,16 @@
108 108  Connection3
109 109  
110 110  
129 +
111 111  === **1.3.2 How to use the parameters of the energy meter and MODBUS commands** ===
112 112  
132 +
113 113  If the user needs to read the parameters of the electric energy meter and use the modbus command,please refer to the appendix of the MODBUS communication protocol in the user manual of the energy meter.
114 114  
115 115  [[image:image-20220601143257-10.png]]
116 116  
117 117  
118 -(% class="box infomessage" %)
119 -(((
120 -**Example:** AT+COMMAND1=01 03 00 00 00 01 84 0A
121 -)))
138 +(% style="color:blue" %)**Example:**(%%)  AT+COMMAND1=01 03 00 00 00 01 84 0A
122 122  
123 123  * The first byte : slave address code (=001～247)
124 124  * The second byte : read register value function code
... ... @@ -127,12 +127,12 @@
127 127  * 7th and 8th bytes: CRC16 checksum from bytes 1 to 6.
128 128  
129 129  (((
147 +
148 +
149 +
130 130  How to parse the reading of the return command of the parameter：
131 -)))
132 132  
133 -(% class="box infomessage" %)
134 -(((
135 -**Example:** RETURN1：01 03 02 08 FD 7E 05
152 +(% style="color:blue" %)**Example:**(%%) RETURN1：01 03 02 08 FD 7E 05
136 136  )))
137 137  
138 138  * The first byte ARD: slave address code (=001～254)
... ... @@ -145,19 +145,27 @@
145 145  (% class="wikigeneratedid" %)
146 146  (((
147 147  
165 +
166 +
167 +
148 148  )))
149 149  
150 150  === **1.3.3 How to configure RS485-LN and parse output commands** ===
151 151  
172 +
152 152  RS485-LN provides two configuration methods: AT COMMAND and DOWNLINK.
153 153  
154 154  
155 -==== **1.3.3.1 via AT COMMAND:** ====
156 156  
157 -First, we can use **AT+CFGDEV** to get the return value, and we can also judge whether the input parameters are correct.
177 +==== **1.3.3.1 via AT COMMAND** ====
158 158  
179 +
180 +First, we can use (% style="color:blue" %)**AT+CFGDEV**(%%) to get the return value, and we can also judge whether the input parameters are correct.
181 +
159 159  (((
160 160  If the configured parameters and commands are incorrect, the return value is not obtained.
184 +
185 +
161 161  )))
162 162  
163 163  [[image:image-20220601143201-9.png]]
... ... @@ -167,7 +167,7 @@
167 167  
168 168  (% class="box infomessage" %)
169 169  (((
170 - AT+DATACUTx : This command defines how to handle the return from AT+COMMANDx, max reture length is 40 bytes. AT+DATACUTx=a,b,c
195 + (% _mstmutation="1" %)**AT+DATACUTx **(%%):  This command defines how to handle the return from AT+COMMANDx, max reture length is 40 bytes. AT+DATACUTx=a,b,c
171 171  )))
172 172  
173 173  a:  length for the return of AT+COMMAND
... ... @@ -201,52 +201,57 @@
201 201  
202 202  (((
203 203  
229 +
230 +
204 204  )))
205 205  
206 206  (((
207 -(% style="color:#4f81bd" %)**Example**:
234 +(% style="color:blue" %)**Example**:
208 208  
209 -CMD1:Read current data with MODBUS command. address:0x03 AT+COMMAND1= 01 03 00 03 00 01,1
236 +
237 +(% style="color:red" %)**CMD1:**(%%) Read current data with MODBUS command. address: 0x03 AT+COMMAND1= 01 03 00 03 00 01,1
210 210  )))
211 211  
212 212  (((
213 -RETURN1:01 03 02 00 02 39 85 00 00(return data)
241 +RETURN1: 01 03 02 00 02 39 85 00 00(return data)
214 214  )))
215 215  
216 216  (((
217 -AT+DATACUT1:9,1,4+5+6+7 Take the return value 00 02 39 85 as the valid value of reading current data and used to splice payload.
245 +AT+DATACUT1: 9,1,4+5+6+7 Take the return value 00 02 39 85 as the valid value of reading current data and used to splice payload.
218 218  
219 219  
220 220  )))
221 221  
222 222  (((
223 -CMD2:Read voltage data with MODBUS command. address:0x00 AT+COMMAND2= 01 03 00 00 00 01,1
251 +(% style="color:red" %)**CMD2: **(%%)Read voltage data with MODBUS command. address: 0x00 AT+COMMAND2= 01 03 00 00 00 01,1
224 224  )))
225 225  
226 226  (((
227 -RETURN2:01 03 02 08 DC BE 1D(return data)
255 +RETURN2: 01 03 02 08 DC BE 1D(return data)
228 228  )))
229 229  
230 230  (((
231 -AT+DATACUT2:7,1,4+5 Take the return value 08 DC as the valid value of reading voltage data and used to splice payload.
259 +AT+DATACUT2: 7,1,4+5 Take the return value 08 DC as the valid value of reading voltage data and used to splice payload.
232 232  
233 233  
234 234  )))
235 235  
236 236  (((
237 -CMD3:Read total active energy data with MODBUS command. address:0x0031 AT+COMMAND3= 01 03 00 31 00 02,1
265 +(% style="color:red" %)**CMD3:**(%%) Read total active energy data with MODBUS command. address: 0x0031 AT+COMMAND3= 01 03 00 31 00 02,1
238 238  )))
239 239  
240 240  (((
241 -RETURN3:01 03 04 00 00 00 44 FA 00(return data)
269 +RETURN3: 01 03 04 00 00 00 44 FA 00(return data)
242 242  )))
243 243  
244 244  (((
245 -AT+DATACUT3:9,1,4+5+6+7 Take the return value 00 00 00 44 as the valid value of reading total active energy data and used to splice payload.
273 +AT+DATACUT3: 9,1,4+5+6+7 Take the return value 00 00 00 44 as the valid value of reading total active energy data and used to splice payload.
246 246  )))
247 247  
248 248  (((
249 -Payload:01 00 02 39 85 08 DC 00 00 00 44
277 +Payload: 01 00 02 39 85 08 DC 00 00 00 44
278 +
279 +
250 250  )))
251 251  
252 252  [[image:image-20220601142936-6.png]]
... ... @@ -254,8 +254,8 @@
254 254  AT COMMAND
255 255  
256 256  
257 -(% style="color:#4f81bd" %)**01 is device address,00 02 is the current, 08 DC is the voltage,00 00 00 44 is the total active energy.**
258 258  
288 +(% style="color:blue" %)**01 is device address,00 02 is the current, 08 DC is the voltage,00 00 00 44 is the total active energy.**
259 259  
260 260  
261 261  [[image:image-20220601143642-2.png]]
... ... @@ -263,8 +263,10 @@
263 263  AT COMMAND
264 264  
265 265  
296 +
266 266  ==== **1.3.3.2 via LoRaWAN DOWNLINK** ====
267 267  
299 +
268 268  [[image:image-20220527093358-15.png]]
269 269  
270 270  (((
... ... @@ -276,7 +276,7 @@
276 276  )))
277 277  
278 278  (((
279 -(% style="color:#4f81bd" %)**Type Code 0xAF**
311 +(% style="color:blue" %)**Type Code 0xAF**
280 280  )))
281 281  
282 282  (((
... ... @@ -287,7 +287,9 @@
287 287  )))
288 288  
289 289  (((
290 -Note: if user use AT+COMMANDx to add a new command, he also need to send AT+DATACUTx downlink.
322 +(% style="color:red" %)**Note: if user use AT+COMMANDx to add a new command, he also need to send AT+DATACUTx downlink.**
323 +
324 +
291 291  )))
292 292  
293 293  (((
... ... @@ -325,7 +325,7 @@
325 325  (((
326 326  
327 327  
328 -(% style="color:#4f81bd" %)**Example:**
362 +(% style="color:blue" %)**Example:**
329 329  )))
330 330  
331 331  (((
... ... @@ -361,8 +361,10 @@
361 361  DOWNLINK
362 362  
363 363  
398 +
364 364  === **1.3.4 How to configure and output commands for RS485 to USB** ===
365 365  
401 +
366 366  (((
367 367  This step is not necessary, it is just to show how to use a normal RS485 to USB adapter to connect to the meter to check the input and output. This can be used to test the connection and RS485 command of the meter without RS485-LN.
368 368  )))
... ... @@ -381,6 +381,8 @@
381 381  
382 382  (((
383 383  check digit: Even
420 +
421 +
384 384  )))
385 385  
386 386  [[image:image-20220527093708-21.png]]
... ... @@ -397,14 +397,18 @@
397 397  
398 398  (((
399 399  The configuration command is consistent with the AT command, input the hexadecimal command directly into the serial port, and the serial port will output the command.
438 +
439 +
400 400  )))
401 401  
402 402  (((
403 -(% style="color:#4f81bd" %)**Example:**  (%%)input：01 03 00 31 00 02 95 c4
443 +(% style="color:blue" %)**Example:**  (%%)input：01 03 00 31 00 02 95 c4
404 404  )))
405 405  
406 406  (((
407 407   output：01 03 04 00 00 00 42 7A 02
448 +
449 +
408 408  )))
409 409  
410 410  [[image:image-20220527093821-23.png]]
... ... @@ -412,8 +412,10 @@
412 412  USB
413 413  
414 414  
457 +
415 415  === **1.3.5 How to configure multiple devices and modify device addresses** ===
416 416  
460 +
417 417  If users need to read the parameters of multiple energy meters, they need to modify the device address, because the default device address of each energy meter is 01.
418 418  
419 419  (((
... ... @@ -425,7 +425,7 @@
425 425  [[image:image-20220601142044-1.png]]
426 426  
427 427  
428 -**Example**:These two meters are examples of setting parameters and device addresses.
472 +(% style="color:blue" %)**Example**(%%): These two meters are examples of setting parameters and device addresses.
429 429  
430 430  [[image:image-20220527093950-25.png]]
431 431  
... ... @@ -432,6 +432,7 @@
432 432  
433 433  [[image:image-20220527094028-26.png]]
434 434  
479 +
435 435  (((
436 436  (((
437 437  First of all, since the default device address of the energy meter is 01, the configuration of two energy meters will conflict, so we first connect an energy meter and configure the device address.
... ... @@ -440,7 +440,7 @@
440 440  
441 441  (((
442 442  (((
443 -We can use AT+CFGDEV to set the device address.
488 +We can use (% style="color:blue" %)**AT+CFGDEV**(%%) to set the device address.
444 444  )))
445 445  )))
446 446  
... ... @@ -452,6 +452,7 @@
452 452  
453 453  [[image:image-20220601142354-2.png]]
454 454  
500 +
455 455  (% class="box infomessage" %)
456 456  (((
457 457  **AT+CFGDEV:01 10 00 61 00 01 02 00 02,1**
... ... @@ -482,43 +482,47 @@
482 482  
483 483  [[image:image-20220601142607-4.png]]
484 484  
485 -**PAYLOAD:01 08 DF 43 62**
486 486  
532 +(% style="color:blue" %)**PAYLOAD: 01 08 DF 43 62**
533 +
487 487  * 08 DF is the valid value of the meter with device address 02.
488 488  * 43 62 is the valid value of the meter with device address 01.
489 489  
537 +== 1.4 Example 4: Circuit Breaker Remote Open Close ==
490 490  
491 491  
492 -== 1.4 Example 4: Circuit Breaker Remote Open Close ==
540 +This instruction is provided by Xavier Florensa Berenguer from [[NORIA GRUPO DE COMPRAS>>url:http://www.gruponovelec.com/]]. It is to show how to use RS485-LN to connect to SCHNEIDER SMART and Monitor and control your cabinet remotely with no wires and with Dragino RS485-LN LoRaWAN technology.
493 493  
494 -This instruction is provided by Xavier Florensa Berenguer from [[NORIA GRUPO DE COMPRAS>>url:http://www.gruponovelec.com/]]. It is to show how to use RS485-LN to connect to SCHNEIDER SMART and Monitor and control your cabinet remotely with no wires and with Dragino RS485-LN LoRaWAN technology. The structure is like below:
542 +The structure is like below:
495 495  
496 496  [[image:image-20220527094330-30.png]]
497 497  
498 498  Connection
499 499  
500 -* [[Circuit Breaker Remote Open Close>>url:http://www.dragino.com/downloads/index.php?dir=RS485-LN/Application_Note/Circuit_Breaker_Remote_Open_Close/]] : Configure Documen
501 501  
549 +* Configure Documen:  [[Circuit Breaker Remote Open Close>>url:http://www.dragino.com/downloads/index.php?dir=RS485-LN/Application_Note/Circuit_Breaker_Remote_Open_Close/||_mstmutation="1"]]
550 +
502 502  == 1.5 Example 5: SEM Three Energy Meter with RS485-BL or RS485-LN ==
503 503  
553 +
504 504  This instruction is provided by Xavier Florensa Berenguer from [[NORIA GRUPO DE COMPRAS>>url:http://www.gruponovelec.com/]]. It is to show how to use RS485-BL to connect to SEM Three Energy Meter and send the data to mobile phone for remote minitor. The structure is like below:
505 505  
506 -* [[Connect to SEM Three>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/RS485-BL/Application_Note/&file=Dragino%20RS485BL%20and%20pickdata%20SEM%20Three%20v1.pdf]] : Configure Document For RS485-BL
556 +* Configure Document For RS485-BL:  [[Connect to SEM Three>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/RS485-BL/Application_Note/&file=Dragino%20RS485BL%20and%20pickdata%20SEM%20Three%20v1.pdf||_mstmutation="1" style="background-color: rgb(255, 255, 255);"]]
557 +* Configure Document for RS485-LN:  [[Connect to SEM Three>>url:http://www.dragino.com/downloads/index.php?dir=RS485-LN/Application_Note/SEM_Three_Energy_Meter/&file=SEM%20three%20and%20Dragino%20RS485-LN%20v1.pdf||_mstmutation="1"]]
507 507  
508 -* [[Connect to SEM Three>>url:http://www.dragino.com/downloads/index.php?dir=RS485-LN/Application_Note/SEM_Three_Energy_Meter/&file=SEM%20three%20and%20Dragino%20RS485-LN%20v1.pdf]] : Configure Document for RS485-LN
559 +== 1.6 Example 6: CEM C31 485-T1-MID Energy Meter with RS485-LN ==
509 509  
510 510  
511 -== 1.6 Example 6:CEM C31 485-T1-MID Energy Meter with RS485-LN ==
512 -
513 513  This instruction is provided by Xavier Florensa Berenguer from [[NORIA GRUPO DE COMPRAS>>url:http://www.gruponovelec.com/]]. It is to show how to use RS485-LN to connect to CEM C31 485-T1-MID and send the data for remote minitor. The structure is like below:
514 514  
515 -* [[CEM C31 485-T1-MID>>url:http://www.dragino.com/downloads/index.php?dir=RS485-LN/Application_Note/ELECTRICAL%20CABINET/&file=ELECTRICAL%20CABINET%20READINGS.pdf]] : Configure Document For RS485-LN
564 +* Configure Document For RS485-LN:  [[CEM C31 485-T1-MID>>url:http://www.dragino.com/downloads/index.php?dir=RS485-LN/Application_Note/ELECTRICAL%20CABINET/&file=ELECTRICAL%20CABINET%20READINGS.pdf||_mstmutation="1" style="background-color: rgb(255, 255, 255);"]]
516 516  
566 +== 1.7 Example 7: Schneider Electric PLC M221 with RS485-BL ==
517 517  
518 -== 1.7 Example 7:Schneider Electric PLC M221 with RS485-BL ==
519 519  
520 520  [[image:image-20220527094556-31.png]]
521 521  
522 522  Network Structure
523 523  
573 +
524 524  * [[Reference Instruction>>url:https://www.dragino.com/downloads/index.php?dir=RS485-LN/Application_Note/Schneider%20Electric%20PLC/]]

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0