Version 86.1 by Kilight Cao on 2025/07/22 16:06
Hide last authors
author | version | line-number | content |
---|---|---|---|
![]() |
2.1 | 1 | **Table of Contents:** |
2 | |||
3 | {{toc/}} | ||
4 | |||
5 | |||
![]() |
72.2 | 6 | = 1. WSS-09 ~-~- 9 in 1 Weather Station Sensor = |
![]() |
2.1 | 7 | |
8 | == 1.1 Overview and Spec == | ||
9 | |||
10 | |||
![]() |
68.2 | 11 | **Older versions of interfaces New version of the interface** |
![]() |
52.1 | 12 | |
![]() |
71.3 | 13 | [[image:image-20250507141942-2.jpeg]] [[image:image-20250507141229-1.png||height="265" width="205"]] |
![]() |
68.2 | 14 | |
![]() |
8.1 | 15 | **Power Input**: 10 ~~ 30VDC |
16 | |||
17 | **Max Power Consumption**: 1.2W | ||
18 | |||
![]() |
2.1 | 19 | **Wind Speed:** |
20 | |||
21 | * Range: 0~~60m/s | ||
22 | * Accuracy: ±(0.2m/s±0.02*v)(v : the wind speed) | ||
23 | * Ultrasonic measurement,no start wind strength needed | ||
24 | |||
25 | **Wind Direction:** | ||
26 | |||
27 | * Range: 0~~3599 | ||
![]() |
63.2 | 28 | * Accuracy: ±3° |
![]() |
68.2 | 29 | * Ultrasonic measurement, no start wind strength needed |
![]() |
2.1 | 30 | * Built-in electronic compass. No need to consider installation direction |
31 | |||
32 | **Temperature:** | ||
33 | |||
34 | * Range: -40°C ~~ +80°C | ||
![]() |
63.2 | 35 | * Accuracy: ±0.5°C |
![]() |
2.1 | 36 | |
37 | **Humidity:** | ||
38 | |||
39 | * Range: 0 ~~ 99% RH | ||
![]() |
63.2 | 40 | * Accuracy Tolerance : Typ ±3% RH |
![]() |
2.1 | 41 | |
42 | **Air Pressure:** | ||
43 | |||
44 | * Accuracy: ±0.15kPa@25°C 101kPa | ||
45 | * Range: 0~~120kPa | ||
46 | |||
47 | **Noise:** | ||
48 | |||
49 | * Range: 30dB~~120dB | ||
![]() |
63.2 | 50 | * Accuracy: ±0.5dB |
![]() |
2.1 | 51 | |
52 | **PM2.5:** | ||
53 | |||
54 | * Range: 0~~1000ug/m3 | ||
55 | * Accuracy: ±3%FS | ||
56 | * Resolution: 1ug/m3 | ||
57 | |||
58 | **PM10:** | ||
59 | |||
60 | * Range: 0~~1000ug/m3 | ||
![]() |
63.2 | 61 | * Accuracy: ±3%FS |
![]() |
2.1 | 62 | * Resolution: 1ug/m3 |
63 | |||
64 | **llumination:** | ||
65 | |||
66 | * Range: 0~~200k Lux | ||
![]() |
63.2 | 67 | * Accuracy: ±7%(25 °C) |
![]() |
2.1 | 68 | |
69 | == 1.2 Wiring == | ||
70 | |||
![]() |
12.2 | 71 | === 1.2.1 Older version wiring === |
72 | |||
![]() |
2.1 | 73 | [[image:image-20240714104450-1.png||height="239" width="445"]] |
74 | |||
75 | |||
![]() |
12.2 | 76 | === 1.2.2 New version wiring === |
77 | |||
![]() |
75.1 | 78 | [[image:image-20250507161616-1.png||height="363" width="682"]] |
![]() |
12.2 | 79 | |
80 | |||
![]() |
8.1 | 81 | == 1.3 Mechinical Drawing == |
82 | |||
![]() |
63.2 | 83 | |
![]() |
8.1 | 84 | (% class="lead" %) |
85 | **Device Dimension** | ||
86 | |||
87 | [[image:image-20240714165651-5.png||height="308" width="245"]] | ||
88 | |||
89 | |||
90 | (% class="lead" %) | ||
91 | **Installation** | ||
92 | |||
93 | * Make sure the device is horizontal installed | ||
94 | * Device include electronic compass. No need to consider installation direction to get correct wind direction. | ||
95 | |||
![]() |
83.2 | 96 | |
97 | |||
98 | == 1.4. RS485 Commands == | ||
99 | |||
100 | |||
![]() |
83.3 | 101 | The RS485 command is as follows: |
102 | |||
103 | |||
104 | |||
![]() |
72.2 | 105 | = 2. WSS-08 ~-~- Optical Range Guage = |
![]() |
2.1 | 106 | |
107 | == 2.1 Overview and Spec == | ||
108 | |||
![]() |
63.2 | 109 | |
![]() |
71.2 | 110 | **Older versions of interfaces New version of the interface** |
![]() |
2.1 | 111 | |
![]() |
71.2 | 112 | [[image:image-20250507142027-3.jpeg]] [[image:image-20250505190822-2.png||height="155" width="197"]] |
![]() |
52.1 | 113 | |
![]() |
2.1 | 114 | * Input Power: 9~~30 VDC |
115 | * Sense diameter: 6cm | ||
![]() |
6.2 | 116 | * Pulse Output, each pulse , 0.1mm |
117 | * Max rain: 24mm/min | ||
118 | * Operation Temperature: -40 ~~ 60 °C | ||
119 | * Operation Humidify: 0~~99%RH(no dew) | ||
![]() |
2.1 | 120 | |
121 | == 2.2 Wiring == | ||
122 | |||
![]() |
21.2 | 123 | === 2.2.1 Older version wiring === |
124 | |||
![]() |
10.1 | 125 | [[image:image-20241127091433-1.jpeg||height="361" width="517"]] |
![]() |
6.2 | 126 | |
![]() |
63.2 | 127 | |
![]() |
21.2 | 128 | === 2.2.2 New version wiring === |
129 | |||
![]() |
63.2 | 130 | |
![]() |
63.1 | 131 | [[image:image-20250505193511-9.png||height="392" width="708"]] |
![]() |
21.2 | 132 | |
![]() |
6.2 | 133 | == 2.3 Mechinical Drawing == |
134 | |||
![]() |
63.2 | 135 | |
![]() |
6.2 | 136 | (% class="lead" %) |
137 | **Device Dimension** | ||
138 | |||
139 | [[image:image-20240714164433-1.png||height="211" width="548"]] | ||
140 | |||
141 | |||
142 | (% class="lead" %) | ||
143 | **Bracket Dimension** | ||
144 | |||
145 | [[image:image-20240714164803-3.png||height="306" width="836"]] | ||
146 | |||
147 | |||
148 | (% class="lead" %) | ||
![]() |
8.1 | 149 | **Install without Bracket** |
![]() |
6.2 | 150 | |
151 | [[image:image-20240714164856-4.png||height="250" width="433"]] | ||
![]() |
21.2 | 152 | |
153 | |||
![]() |
72.2 | 154 | = 3. WSS-27 ~-~- PAR (Photosynthetically Available Radiation) = |
![]() |
21.2 | 155 | |
156 | |||
![]() |
65.2 | 157 | WSS-27 photosynthetically active radiation sensor is mainly used to measure the photosynthetically active radiation of natural light in the wavelength range of 400-700nm. |
158 | |||
159 | WSS-27 use precision optical detectors and has an optical filter of 400-700nm, when natural light is irradiated, a voltage signal proportional to the intensity of the incident radiation is generated, and its luminous flux density is proportional to the cosine of the direct angle of the incident light. | ||
160 | |||
![]() |
67.2 | 161 | |
![]() |
65.2 | 162 | == 3.1 Specification == |
163 | |||
![]() |
21.2 | 164 | [[image:1746411474621-748.png||height="175" width="224"]] |
165 | |||
![]() |
65.2 | 166 | * Input Power: DC 5 ~~ 24v |
167 | * Interface: RS485 | ||
168 | * Response Spectrum: 400~~700nm | ||
169 | * Measure range: 0 ~~ 2500μmol/m2•s | ||
170 | * Resolution: 1μmol/m2•s | ||
![]() |
21.2 | 171 | * Accuracy: ±2% |
![]() |
65.2 | 172 | * Yearly Stability: ≤ ±2% |
173 | * Working Temperature: -30℃ ~~ 75℃ | ||
174 | * Working Humidity: 10 ~~ 90%RH | ||
![]() |
78.3 | 175 | * Power Consumption: 5mA @ 12v & 6mA @ 5v |
176 | * Stable Time: 5s | ||
![]() |
21.2 | 177 | |
178 | == 3.2 Wiring == | ||
179 | |||
![]() |
63.1 | 180 | [[image:image-20250505193330-8.png||height="393" width="744"]] |
![]() |
24.2 | 181 | |
![]() |
65.2 | 182 | == 3.3 Dimension == |
![]() |
21.2 | 183 | |
![]() |
65.2 | 184 | [[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/Dragino%20LoRaWAN%20Weather%20Station%20User%20Manual/WebHome/1656057538793-888.png?rev=1.1||alt="1656057538793-888.png"]] |
![]() |
21.2 | 185 | |
![]() |
66.3 | 186 | == 3.4 Installation Notice == |
![]() |
21.2 | 187 | |
![]() |
67.2 | 188 | |
![]() |
66.3 | 189 | Do not power on while connect the cables. Double check the wiring before power on. |
190 | |||
191 | [[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/Dragino%20LoRaWAN%20Weather%20Station%20User%20Manual/WebHome/1656057557191-895.png?rev=1.1||alt="1656057557191-895.png"]] | ||
192 | |||
193 | [[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/Dragino%20LoRaWAN%20Weather%20Station%20User%20Manual/WebHome/1656057565783-251.png?rev=1.1||alt="1656057565783-251.png"]] | ||
194 | |||
195 | |||
![]() |
72.2 | 196 | = 4. WSS-26 ~-~- Total Solar Radiation sensor = |
![]() |
21.2 | 197 | |
![]() |
67.2 | 198 | |
![]() |
65.2 | 199 | WSS-26 is Total Radiation Sensor can be used to measure the total solar radiation in the spectral range of 0.3 to 3 μm (300 to 3000 nm). If the sensor face is down, the reflected radiation can be measured, and the shading ring can also be used to measure the scattered radiation. |
![]() |
21.2 | 200 | |
![]() |
67.2 | 201 | The core device of the radiation sensor is a high-precision photosensitive element, which has good stability and high precision; at the same time, a precision-machined PTTE radiation cover is installed outside the sensing element, which effectively prevents environmental factors from affecting its performance. |
![]() |
21.2 | 202 | |
![]() |
67.2 | 203 | |
![]() |
65.2 | 204 | == 4.1 Feature == |
![]() |
21.2 | 205 | |
![]() |
67.2 | 206 | |
![]() |
65.2 | 207 | * RS485 Total Solar Radiation sensor |
208 | * Measure Total Radiation between 0.3 ~~ 3μm(300 ~~ 3000nm) | ||
209 | * Measure Reflected Radiation if sense area towards ground. | ||
210 | |||
211 | == 4.2 Specification == | ||
212 | |||
![]() |
67.2 | 213 | |
214 | (% id="cke_bm_101984S" style="display:none" %) | ||
215 | |||
![]() |
65.2 | 216 | * Input Power: DC 5 ~~ 24v |
217 | * Interface: RS485 | ||
218 | * Detect spectrum: 0.3 ~~ 3μm(300~3000nm) | ||
219 | * Measure strength range: 0 ~~ 2000W/m2 | ||
220 | * Resolution: 0.1W/m2 | ||
221 | * Accuracy: ±3% | ||
222 | * Yearly Stability: ≤±2% | ||
223 | * Cosine response: ≤7% (@ Sun angle 10°) | ||
224 | * Temperature Effect: ±2% (-10℃ ~~ 40℃) | ||
225 | * Working Temperature: -40℃ ~~ 70℃ | ||
226 | * Working Humidity: 10 ~~ 90%RH | ||
227 | * Power Consumption: 4mA @ 12v | ||
228 | |||
![]() |
68.3 | 229 | == 4.3 Wiring == |
![]() |
24.2 | 230 | |
231 | |||
![]() |
63.1 | 232 | [[image:image-20250505193313-7.png||height="391" width="722"]] |
![]() |
24.2 | 233 | |
![]() |
68.3 | 234 | == 4.4 Device Dimension == |
![]() |
24.2 | 235 | |
![]() |
65.2 | 236 | [[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/Dragino%20LoRaWAN%20Weather%20Station%20User%20Manual/WebHome/1656057348695-898.png?rev=1.1||alt="1656057348695-898.png"]] |
![]() |
24.2 | 237 | |
238 | |||
![]() |
68.3 | 239 | == 4.5 Installation Notice == |
![]() |
24.2 | 240 | |
![]() |
67.2 | 241 | |
![]() |
65.2 | 242 | Do not power on while connect the cables. Double check the wiring before power on. |
![]() |
24.2 | 243 | |
![]() |
65.2 | 244 | [[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/Dragino%20LoRaWAN%20Weather%20Station%20User%20Manual/WebHome/1656057369259-804.png?rev=1.1||alt="1656057369259-804.png"]] |
![]() |
24.2 | 245 | |
![]() |
65.2 | 246 | [[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/Dragino%20LoRaWAN%20Weather%20Station%20User%20Manual/WebHome/1656057377943-564.png?rev=1.1||alt="1656057377943-564.png"]] |
![]() |
24.2 | 247 | |
248 | |||
![]() |
81.2 | 249 | == 4.6 Calibration Values (K-value Adjustment) == |
![]() |
80.1 | 250 | |
![]() |
81.4 | 251 | In the event of deviations in the sensor values, calibration can be carried out by modifying the sensor's internal parameter: K-value parameter(**Default: 03E8(H)=1000(D)**). |
![]() |
80.1 | 252 | |
![]() |
81.6 | 253 | (% style="color:#037691" %)**Calibration Principle** |
![]() |
80.1 | 254 | |
![]() |
81.4 | 255 | The K-value scales the sensor's output. If multiple sensors measure the same parameter but show different values, adjust the K-value of the secondary sensor(s) to match the primary sensor's reading. |
256 | |||
![]() |
81.6 | 257 | (% style="color:#037691" %)**Step-by-Step Example:** |
![]() |
81.4 | 258 | |
![]() |
81.6 | 259 | **Scenario:** |
![]() |
81.5 | 260 | |
261 | * Sensor 1 (reference) reads 1500. | ||
262 | * Sensor 2 reads 2000, but should match Sensor 1's value (~~1500). | ||
263 | |||
![]() |
81.6 | 264 | **Steps:** |
265 | |||
![]() |
81.10 | 266 | **~1. Calculate the K-value ratio**: |
![]() |
81.7 | 267 | |
![]() |
81.9 | 268 | Ratio=Desired Value/Current Value=1500/2000=0.75 |
![]() |
81.7 | 269 | |
![]() |
81.10 | 270 | Multiply by the default K-value (1000) to get the new K-value: 0.75×1000=750(Decimal) |
![]() |
81.7 | 271 | |
![]() |
81.17 | 272 | **2. Convert the (% style="color:#037691" %)new K-value(%%) to hexadecimal**: |
![]() |
81.7 | 273 | |
![]() |
81.14 | 274 | * 750(D) = 0x02EE(H) |
![]() |
81.9 | 275 | |
![]() |
81.15 | 276 | **3. Send the calibration command to Sensor 2**: |
![]() |
81.9 | 277 | |
![]() |
81.17 | 278 | * Command Format: **0B 06 00 53 [(% style="color:#037691" %)K-value(%%) (2 bytes)] [CRC]** |
![]() |
82.1 | 279 | * Example for K-value 0x02EE: 0B 06 00 53 02 EE F8 5D |
![]() |
81.9 | 280 | |
![]() |
82.1 | 281 | (% style="color:red" %)**Notes:** |
![]() |
81.10 | 282 | |
![]() |
82.1 | 283 | ~1. Always use the sensor with the most trusted reading as the reference (do not modify its K-value). |
![]() |
81.16 | 284 | |
![]() |
82.1 | 285 | 2. The default K-value 03E8 (1000) implies no scaling. Values below 03E8 reduce the output; values above increase it. |
![]() |
80.1 | 286 | |
![]() |
82.1 | 287 | 3. CRC is auto-generated by the tool (no manual calculation needed). |
![]() |
80.1 | 288 | |
![]() |
82.1 | 289 | |
![]() |
72.2 | 290 | = 5. WSS-25 ~-~- Temperature, Humidity, Illuminance, Pressure = |
![]() |
65.2 | 291 | |
![]() |
67.2 | 292 | |
![]() |
65.2 | 293 | WSS-25 is a 4 in 1 RS485 sensor which can monitor Temperature, Humidity, Illuminance and Pressure at the same time. |
294 | |||
![]() |
67.2 | 295 | |
![]() |
65.2 | 296 | == 5.1 Feature == |
297 | |||
![]() |
67.2 | 298 | |
![]() |
65.2 | 299 | * RS485 Temperature, Humidity, Illuminance, Pressure sensor |
300 | |||
301 | == 5.2 Specification == | ||
302 | |||
303 | |||
304 | * Input Power: DC 12 ~~ 24v | ||
305 | * Interface: RS485 | ||
306 | * Temperature Sensor Spec: | ||
307 | ** Range: -30 ~~ 70℃ | ||
308 | ** resolution 0.1℃ | ||
309 | ** Accuracy: ±0.5℃ | ||
310 | * Humidity Sensor Spec: | ||
311 | ** Range: 0 ~~ 100% RH | ||
312 | ** resolution 0.1 %RH | ||
![]() |
67.2 | 313 | ** Accuracy: ±3% RH |
![]() |
65.2 | 314 | * Pressure Sensor Spec: |
315 | ** Range: 10 ~~ 1100hPa | ||
316 | ** Resolution: 0.1hPa | ||
317 | ** Accuracy: ±0.1hPa | ||
318 | * Illuminate sensor: | ||
319 | ** Range: 0~~2/20/200kLux | ||
320 | ** Resolution: 10 Lux | ||
321 | ** Accuracy: ±3%FS | ||
322 | * Working Temperature: -30℃ ~~ 70℃ | ||
323 | * Working Humidity: 10 ~~ 90%RH | ||
324 | * Power Consumption: 4mA @ 12v | ||
325 | |||
![]() |
68.3 | 326 | == 5.3 Wiring == |
![]() |
25.2 | 327 | |
![]() |
29.2 | 328 | |
![]() |
63.1 | 329 | [[image:image-20250505193252-6.png||height="409" width="765"]] |
![]() |
29.2 | 330 | |
![]() |
68.3 | 331 | == 5.4 Dimension == |
![]() |
29.2 | 332 | |
333 | |||
![]() |
65.2 | 334 | [[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/Dragino%20LoRaWAN%20Weather%20Station%20User%20Manual/WebHome/1656057170639-522.png?rev=1.1||alt="1656057170639-522.png"]] |
![]() |
29.2 | 335 | |
336 | |||
![]() |
68.3 | 337 | == 5.5 Installation Notice == |
![]() |
66.2 | 338 | |
![]() |
67.2 | 339 | |
![]() |
66.2 | 340 | Do not power on while connect the cables. Double check the wiring before power on. |
341 | |||
342 | [[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/Dragino%20LoRaWAN%20Weather%20Station%20User%20Manual/WebHome/1656057199955-514.png?rev=1.1||alt="1656057199955-514.png"]] | ||
343 | |||
344 | [[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/Dragino%20LoRaWAN%20Weather%20Station%20User%20Manual/WebHome/1656057212438-475.png?rev=1.1||alt="1656057212438-475.png"]] | ||
345 | |||
346 | |||
![]() |
72.2 | 347 | = 6. WSS-24 ~-~- Rain/Snow Detect = |
![]() |
29.2 | 348 | |
![]() |
67.2 | 349 | |
![]() |
65.2 | 350 | WSS-24 is a RS485 rain / snow detect sensor. It can monitor Rain or Snow event. |
![]() |
29.2 | 351 | |
![]() |
65.2 | 352 | WSS-24 has auto heating feature, this ensures measurement more reliable. |
![]() |
29.2 | 353 | |
![]() |
67.2 | 354 | == 6.1 Feature == |
![]() |
29.2 | 355 | |
![]() |
67.2 | 356 | |
![]() |
65.2 | 357 | * RS485 Rain/Snow detect sensor |
358 | * Surface heating to dry | ||
359 | * grid electrode uses Electroless Nickel/Immersion Gold design for resist corrosion | ||
![]() |
29.2 | 360 | |
![]() |
67.2 | 361 | == 6.2 Specification == |
![]() |
65.2 | 362 | |
![]() |
67.2 | 363 | |
![]() |
65.2 | 364 | * Detect if there is rain or snow |
365 | * Input Power: DC 12 ~~ 24v | ||
366 | * Interface: RS485 | ||
367 | * Working Temperature: -30℃ ~~ 70℃ | ||
368 | * Working Humidity: 10 ~~ 90%RH | ||
369 | * Power Consumption: | ||
370 | ** No heating: 12mA @ 12v, | ||
371 | ** heating: 94ma @ 12v. | ||
372 | |||
![]() |
68.3 | 373 | == 6.3 Wiring == |
![]() |
29.2 | 374 | |
![]() |
68.3 | 375 | [[image:image-20250505193053-5.png||height="479" width="895"]] |
![]() |
29.2 | 376 | |
![]() |
68.3 | 377 | == 6.4 Dimension == |
![]() |
32.2 | 378 | |
379 | [[image:image-20250505144906-15.png]] | ||
380 | |||
381 | |||
![]() |
68.3 | 382 | == 6.5 Installation Notice == |
![]() |
32.2 | 383 | |
![]() |
67.2 | 384 | |
![]() |
65.2 | 385 | Do not power on while connect the cables. Double check the wiring before power on. |
![]() |
63.2 | 386 | |
![]() |
65.2 | 387 | Install with 15°degree. |
![]() |
32.2 | 388 | |
![]() |
65.2 | 389 | [[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/Dragino%20LoRaWAN%20Weather%20Station%20User%20Manual/WebHome/1656056873783-780.png?rev=1.1||alt="1656056873783-780.png"]] |
![]() |
32.2 | 390 | |
![]() |
65.2 | 391 | [[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/Dragino%20LoRaWAN%20Weather%20Station%20User%20Manual/WebHome/1656056883736-804.png?rev=1.1||alt="1656056883736-804.png"]] |
![]() |
32.2 | 392 | |
![]() |
68.3 | 393 | == 6.6 Heating == |
![]() |
32.2 | 394 | |
![]() |
67.2 | 395 | |
![]() |
76.1 | 396 | WSS-24 supports auto-heat feature. When the temperature is below the heat start temperature 15℃, WSS-24 starts to heat and stop at stop temperature (default is 25℃). |
![]() |
66.1 | 397 | |
398 | |||
![]() |
72.2 | 399 | = 7. WSS-23 ~-~- CO2/PM2.5/PM10 = |
![]() |
32.2 | 400 | |
![]() |
67.2 | 401 | |
![]() |
65.2 | 402 | WSS-23 is a RS485 Air Quality sensor. It can monitor CO2, PM2.5 and PM10 at the same time. |
![]() |
32.2 | 403 | |
![]() |
65.2 | 404 | WSS-23 uses weather proof shield which can make sure the sensors are well protected against UV & radiation. |
![]() |
34.1 | 405 | |
![]() |
67.2 | 406 | |
![]() |
65.2 | 407 | == 7.1 Feature == |
![]() |
47.1 | 408 | |
![]() |
67.2 | 409 | |
![]() |
65.2 | 410 | * RS485 CO2, PM2.5, PM10 sensor |
411 | * NDIR to measure CO2 with Internal Temperature Compensation | ||
412 | * Laser Beam Scattering to PM2.5 and PM10 | ||
![]() |
47.1 | 413 | |
![]() |
65.2 | 414 | == 7.2 Specification == |
![]() |
47.1 | 415 | |
![]() |
67.2 | 416 | |
![]() |
65.2 | 417 | * CO2 Range: 0 ~~ 5000ppm, accuracy: ±3%F•S(25℃) |
418 | * CO2 resolution: 1ppm | ||
419 | * PM2.5/PM10 Range: 0 ~~ 1000μg/m3 , accuracy ±3%F•S(25℃) | ||
420 | * PM2.5/PM10 resolution: 1μg/m3 | ||
421 | * Input Power: DC 7 ~~ 24v | ||
422 | * Preheat time: 3min | ||
423 | * Interface: RS485 | ||
424 | * Working Temperature: | ||
425 | ** CO2: 0℃ ~~ 50℃; | ||
426 | ** PM2.5/PM10: -30 ~~ 50℃ | ||
427 | * Working Humidity: | ||
428 | ** PM2.5/PM10: 15 ~~ 80%RH (no dewing) | ||
429 | ** CO2: 0 ~~ 95%RH | ||
430 | * Power Consumption: 50mA@ 12v. | ||
![]() |
47.1 | 431 | |
![]() |
68.3 | 432 | == 7.3 Wiring == |
![]() |
34.1 | 433 | |
![]() |
63.1 | 434 | [[image:image-20250505193033-4.png||height="376" width="689"]] |
![]() |
46.1 | 435 | |
![]() |
68.3 | 436 | == 7.4 Device Dimension == |
![]() |
46.1 | 437 | |
438 | |||
![]() |
65.2 | 439 | [[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/Dragino%20LoRaWAN%20Weather%20Station%20User%20Manual/WebHome/1656056708366-230.png?rev=1.1||alt="1656056708366-230.png"]] |
![]() |
46.1 | 440 | |
441 | |||
![]() |
68.3 | 442 | == 7.5 Installation Notice == |
![]() |
65.2 | 443 | |
![]() |
67.2 | 444 | |
![]() |
65.2 | 445 | Do not power on while connect the cables. Double check the wiring before power on. |
446 | |||
447 | [[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/Dragino%20LoRaWAN%20Weather%20Station%20User%20Manual/WebHome/1656056751153-304.png?rev=1.1||alt="1656056751153-304.png"]] | ||
448 | |||
449 | [[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/Dragino%20LoRaWAN%20Weather%20Station%20User%20Manual/WebHome/1656056766224-773.png?rev=1.1||alt="1656056766224-773.png"]] | ||
450 | |||
451 | |||
![]() |
72.2 | 452 | = 8. WSS-22 ~-~- Integrated wind speed and direction sensor = |
![]() |
46.1 | 453 | |
454 | [[image:1746441120854-584.png||height="271" width="394"]] | ||
455 | |||
![]() |
65.2 | 456 | WSS-22 is a RS485 wind speed and wind direction monitor designed for weather station solution. |
![]() |
46.1 | 457 | |
![]() |
65.2 | 458 | WSS-22 shell is made of polycarbonate composite material, which has good anti-corrosion and anti-corrosion characteristics, and ensure the long-term use of the sensor without rust. At the same time, it cooperates with the internal smooth bearing system to ensure the stability of information collection |
459 | |||
460 | |||
461 | == 8.1 Feature == | ||
462 | |||
![]() |
68.3 | 463 | |
![]() |
65.2 | 464 | * RS485 wind speed / direction sensor |
465 | * PC enclosure, resist corrosion | ||
466 | |||
467 | == 8.2 Specification == | ||
468 | |||
![]() |
68.3 | 469 | |
![]() |
65.2 | 470 | * Wind speed range: 0 ~~ 60m/s |
471 | * Wind direction range: 0 ~~ 360° | ||
472 | * Start wind speed: ≤0.3 m/s | ||
473 | * Accuracy: ±(0.3+0.03V) m/s , ±1° | ||
474 | * Input Power: DC 5 ~~ 24v | ||
475 | * Interface: RS485 | ||
476 | * Working Temperature: -30℃ ~~ 70℃ | ||
477 | * Working Humidity: <100% (no dewing) | ||
![]() |
67.2 | 478 | * Power Consumption: 13mA @ 12v. |
![]() |
65.2 | 479 | * Cable Length: 2 meters |
480 | |||
![]() |
68.3 | 481 | == 8.3 Wiring == |
![]() |
46.1 | 482 | |
![]() |
63.1 | 483 | [[image:image-20250505192929-2.png||height="314" width="590"]] |
![]() |
46.1 | 484 | |
485 | |||
![]() |
68.3 | 486 | == 8.4 Device Dimension == |
![]() |
46.1 | 487 | |
![]() |
65.2 | 488 | (% class="wikigeneratedid" %) |
489 | [[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/Dragino%20LoRaWAN%20Weather%20Station%20User%20Manual/WebHome/image-20220624152813-2.png?rev=1.1||alt="image-20220624152813-2.png"]] | ||
![]() |
46.1 | 490 | |
491 | |||
![]() |
68.3 | 492 | == 8.5 Angle Mapping == |
![]() |
46.1 | 493 | |
![]() |
68.3 | 494 | [[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/Dragino%20LoRaWAN%20Weather%20Station%20User%20Manual/WebHome/1656056303845-585.png?rev=1.1||alt="1656056303845-585.png" height="455" width="476"]] |
![]() |
46.1 | 495 | |
496 | |||
![]() |
68.3 | 497 | == 8.6 Installation Notice == |
498 | |||
499 | |||
![]() |
65.2 | 500 | Do not power on while connect the cables. Double check the wiring before power on. |
501 | |||
502 | The sensor must be installed with below direction, towards North. | ||
503 | |||
![]() |
46.1 | 504 | [[image:1746441560175-162.png||height="304" width="484"]] |
505 | |||
506 | |||
![]() |
77.1 | 507 | = 9. WSS-21 ~-~- Rain Gauge = |
![]() |
46.1 | 508 | |
![]() |
67.2 | 509 | |
![]() |
65.2 | 510 | WSS-21 RS485 Rain Gauge is used in meteorology and hydrology to gather and measure the amount of liquid precipitation (mainly rainfall) over an area. |
![]() |
46.1 | 511 | |
![]() |
65.2 | 512 | WSS-21 uses a tipping bucket to detect rainfall. The tipping bucket use 3D streamline shape to make sure it works smoothly and is easy to clean. |
![]() |
46.1 | 513 | |
![]() |
65.2 | 514 | The tipping bucket of WSS-01 is adjusted to the best angle. When installation, user only needs to screw up and adjust the bottom horizontally. |
![]() |
46.1 | 515 | |
![]() |
65.2 | 516 | WSS-21 package includes screw which can be installed to ground. If user want to install WSS-21 on pole, they can purchase WS-K2 bracket kit. |
517 | |||
![]() |
67.2 | 518 | |
![]() |
65.2 | 519 | == 9.1 Feature == |
520 | |||
![]() |
68.3 | 521 | |
![]() |
65.2 | 522 | * RS485 Rain Gauge |
523 | * Small dimension, easy to install | ||
524 | * Vents under funnel, avoid leaf or other things to avoid rain flow. | ||
525 | * ABS enclosure. | ||
526 | * Horizontal adjustable. | ||
527 | |||
528 | == 9.2 Specification == | ||
529 | |||
![]() |
68.3 | 530 | |
![]() |
46.1 | 531 | * Resolution: 0.2mm |
![]() |
65.2 | 532 | * Accuracy: ±3% |
533 | * Range: 0 ~~ 100mm | ||
534 | * Rainfall strength: 0mm ~~ 4mm/min (max 8mm/min) | ||
535 | * Input Power: DC 5 ~~ 24v | ||
536 | * Interface: RS485 | ||
537 | * Working Temperature: 0℃ ~~ 70℃ (incorrect below 0 degree, because water become ICE) | ||
538 | * Working Humidity: <100% (no dewing) | ||
539 | * Power Consumption: 4mA @ 12v. | ||
![]() |
46.1 | 540 | |
![]() |
65.2 | 541 | == 9.3 Wiring == |
![]() |
46.1 | 542 | |
![]() |
63.1 | 543 | [[image:image-20250505192952-3.png||height="305" width="581"]] |
![]() |
46.1 | 544 | |
545 | |||
![]() |
68.3 | 546 | == 9.4 Dimension == |
![]() |
46.1 | 547 | |
548 | |||
549 | [[image:image-20250505184528-20.png||height="468" width="471"]] | ||
550 | |||
551 | [[image:image-20250505185334-22.png||height="533" width="470"]] | ||
![]() |
65.2 | 552 | |
![]() |
68.3 | 553 | == 9.5 Installation Notice == |
![]() |
65.2 | 554 | |
555 | |||
556 | ((( | ||
557 | Do not power on while connect the cables. Double check the wiring before power on. | ||
558 | ))) | ||
559 | |||
560 | ((( | ||
561 | Installation Photo as reference: | ||
562 | ))) | ||
563 | |||
564 | |||
565 | ((( | ||
566 | (% style="color:#4472c4" %)** Install on Ground:** | ||
567 | ))) | ||
568 | |||
569 | ((( | ||
570 | WSS-21 Rain Gauge include screws so can install in ground directly . | ||
571 | ))) | ||
572 | |||
573 | |||
574 | ((( | ||
575 | (% style="color:#4472c4" %)** Install on pole:** | ||
576 | ))) | ||
577 | |||
578 | ((( | ||
579 | If user want to install on pole, they can purchase the (% style="color:#4472c4" %)** WS-K2 : Bracket Kit for Pole installation**(%%), and install as below: | ||
580 | |||
581 | [[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/Dragino%20LoRaWAN%20Weather%20Station%20User%20Manual/WebHome/image-20220624152218-1.png?width=276&height=526&rev=1.1||alt="image-20220624152218-1.png"]] | ||
582 | |||
583 | WS-K2: Bracket Kit for Pole installation | ||
584 | |||
![]() |
83.1 | 585 | WS-K2 dimension document, please see: |
![]() |
65.2 | 586 | ))) |
587 | |||
588 | [[https:~~/~~/www.dropbox.com/sh/7wa2elfm2q8xq4l/AAB7ZB_gSVGrhmJEgU2LyTQNa?dl=0>>https://www.dropbox.com/sh/7wa2elfm2q8xq4l/AAB7ZB_gSVGrhmJEgU2LyTQNa?dl=0]] | ||
![]() |
75.1 | 589 | |
590 | |||
591 |