Hide last authors
author | version | line-number | content |
---|---|---|---|
![]() |
2.1 | 1 | **Table of Contents:** |
2 | |||
3 | {{toc/}} | ||
4 | |||
5 | |||
![]() |
11.1 | 6 | = 1. WSS-09 9 in 1 Weather Station Sensor = |
![]() |
2.1 | 7 | |
8 | == 1.1 Overview and Spec == | ||
9 | |||
![]() |
52.1 | 10 | Older versions of interfaces New version of the interface |
![]() |
2.1 | 11 | |
![]() |
52.1 | 12 | [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/WSC2-LB_LoRaWAN_Weather_Station_User_Manual/WebHome/image-20240708092247-1.png?rev=1.1||alt="image-20240708092247-1.png"]] [[image:image-20250505190747-1.png||height="275" width="220"]] |
13 | |||
![]() |
8.1 | 14 | **Power Input**: 10 ~~ 30VDC |
15 | |||
16 | **Max Power Consumption**: 1.2W | ||
17 | |||
![]() |
2.1 | 18 | **Wind Speed:** |
19 | |||
20 | * Range: 0~~60m/s | ||
21 | * Accuracy: ±(0.2m/s±0.02*v)(v : the wind speed) | ||
22 | * Ultrasonic measurement,no start wind strength needed | ||
23 | |||
24 | **Wind Direction:** | ||
25 | |||
26 | * Range: 0~~3599 | ||
![]() |
63.2 | 27 | * Accuracy: ±3° |
![]() |
2.1 | 28 | * Ultrasonic measurement,no start wind strength needed |
29 | * Built-in electronic compass. No need to consider installation direction | ||
30 | |||
31 | **Temperature:** | ||
32 | |||
33 | * Range: -40°C ~~ +80°C | ||
![]() |
63.2 | 34 | * Accuracy: ±0.5°C |
![]() |
2.1 | 35 | |
36 | **Humidity:** | ||
37 | |||
38 | * Range: 0 ~~ 99% RH | ||
![]() |
63.2 | 39 | * Accuracy Tolerance : Typ ±3% RH |
![]() |
2.1 | 40 | |
41 | **Air Pressure:** | ||
42 | |||
43 | * Accuracy: ±0.15kPa@25°C 101kPa | ||
44 | * Range: 0~~120kPa | ||
45 | |||
46 | **Noise:** | ||
47 | |||
48 | * Range: 30dB~~120dB | ||
![]() |
63.2 | 49 | * Accuracy: ±0.5dB |
![]() |
2.1 | 50 | |
51 | **PM2.5:** | ||
52 | |||
53 | * Range: 0~~1000ug/m3 | ||
54 | * Accuracy: ±3%FS | ||
55 | * Resolution: 1ug/m3 | ||
56 | |||
57 | **PM10:** | ||
58 | |||
59 | * Range: 0~~1000ug/m3 | ||
![]() |
63.2 | 60 | * Accuracy: ±3%FS |
![]() |
2.1 | 61 | * Resolution: 1ug/m3 |
62 | |||
63 | **llumination:** | ||
64 | |||
65 | * Range: 0~~200k Lux | ||
![]() |
63.2 | 66 | * Accuracy: ±7%(25 °C) |
![]() |
2.1 | 67 | |
68 | == 1.2 Wiring == | ||
69 | |||
![]() |
12.2 | 70 | === 1.2.1 Older version wiring === |
71 | |||
![]() |
2.1 | 72 | [[image:image-20240714104450-1.png||height="239" width="445"]] |
73 | |||
74 | |||
![]() |
12.2 | 75 | === 1.2.2 New version wiring === |
76 | |||
![]() |
63.1 | 77 | [[image:image-20250505193603-10.png||height="405" width="762"]] |
![]() |
12.2 | 78 | |
79 | |||
![]() |
8.1 | 80 | == 1.3 Mechinical Drawing == |
81 | |||
![]() |
63.2 | 82 | |
![]() |
8.1 | 83 | (% class="lead" %) |
84 | **Device Dimension** | ||
85 | |||
86 | [[image:image-20240714165651-5.png||height="308" width="245"]] | ||
87 | |||
88 | |||
89 | (% class="lead" %) | ||
90 | **Installation** | ||
91 | |||
92 | * Make sure the device is horizontal installed | ||
93 | * Device include electronic compass. No need to consider installation direction to get correct wind direction. | ||
94 | |||
![]() |
11.1 | 95 | = 2. WSS-08 Optical Range Guage = |
![]() |
2.1 | 96 | |
97 | == 2.1 Overview and Spec == | ||
98 | |||
![]() |
63.2 | 99 | |
![]() |
52.1 | 100 | Older versions of interfaces New version of the interface |
![]() |
2.1 | 101 | |
![]() |
52.1 | 102 | [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/WSC2-LB_LoRaWAN_Weather_Station_User_Manual/WebHome/image-20240707215336-2.png?width=218&height=159&rev=1.1||alt="image-20240707215336-2.png" height="159" width="218"]] [[image:image-20250505190822-2.png||height="155" width="197"]] |
103 | |||
![]() |
2.1 | 104 | * Input Power: 9~~30 VDC |
105 | * Sense diameter: 6cm | ||
![]() |
6.2 | 106 | * Pulse Output, each pulse , 0.1mm |
107 | * Max rain: 24mm/min | ||
108 | * Operation Temperature: -40 ~~ 60 °C | ||
109 | * Operation Humidify: 0~~99%RH(no dew) | ||
![]() |
2.1 | 110 | |
111 | == 2.2 Wiring == | ||
112 | |||
![]() |
21.2 | 113 | === 2.2.1 Older version wiring === |
114 | |||
![]() |
10.1 | 115 | [[image:image-20241127091433-1.jpeg||height="361" width="517"]] |
![]() |
6.2 | 116 | |
![]() |
63.2 | 117 | |
![]() |
21.2 | 118 | === 2.2.2 New version wiring === |
119 | |||
![]() |
63.2 | 120 | |
![]() |
63.1 | 121 | [[image:image-20250505193511-9.png||height="392" width="708"]] |
![]() |
21.2 | 122 | |
![]() |
6.2 | 123 | == 2.3 Mechinical Drawing == |
124 | |||
![]() |
63.2 | 125 | |
![]() |
6.2 | 126 | (% class="lead" %) |
127 | **Device Dimension** | ||
128 | |||
129 | [[image:image-20240714164433-1.png||height="211" width="548"]] | ||
130 | |||
131 | |||
132 | (% class="lead" %) | ||
133 | **Bracket Dimension** | ||
134 | |||
135 | [[image:image-20240714164803-3.png||height="306" width="836"]] | ||
136 | |||
137 | |||
138 | (% class="lead" %) | ||
![]() |
8.1 | 139 | **Install without Bracket** |
![]() |
6.2 | 140 | |
141 | [[image:image-20240714164856-4.png||height="250" width="433"]] | ||
![]() |
21.2 | 142 | |
143 | |||
![]() |
65.2 | 144 | = 3. PAR (Photosynthetically Available Radiation) ~-~-~-~--WSS-27 = |
![]() |
21.2 | 145 | |
146 | |||
![]() |
65.2 | 147 | WSS-27 photosynthetically active radiation sensor is mainly used to measure the photosynthetically active radiation of natural light in the wavelength range of 400-700nm. |
148 | |||
149 | WSS-27 use precision optical detectors and has an optical filter of 400-700nm, when natural light is irradiated, a voltage signal proportional to the intensity of the incident radiation is generated, and its luminous flux density is proportional to the cosine of the direct angle of the incident light. | ||
150 | |||
![]() |
67.2 | 151 | |
![]() |
65.2 | 152 | == 3.1 Specification == |
153 | |||
![]() |
21.2 | 154 | [[image:1746411474621-748.png||height="175" width="224"]] |
155 | |||
![]() |
65.2 | 156 | * Input Power: DC 5 ~~ 24v |
157 | * Interface: RS485 | ||
158 | * Response Spectrum: 400~~700nm | ||
159 | * Measure range: 0 ~~ 2500μmol/m2•s | ||
160 | * Resolution: 1μmol/m2•s | ||
![]() |
21.2 | 161 | * Accuracy: ±2% |
![]() |
65.2 | 162 | * Yearly Stability: ≤ ±2% |
163 | * Working Temperature: -30℃ ~~ 75℃ | ||
164 | * Working Humidity: 10 ~~ 90%RH | ||
165 | * Power Consumption: 3mA @ 12v | ||
![]() |
21.2 | 166 | |
167 | == 3.2 Wiring == | ||
168 | |||
![]() |
63.1 | 169 | [[image:image-20250505193330-8.png||height="393" width="744"]] |
![]() |
24.2 | 170 | |
![]() |
65.2 | 171 | == 3.3 Dimension == |
![]() |
21.2 | 172 | |
![]() |
65.2 | 173 | [[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/Dragino%20LoRaWAN%20Weather%20Station%20User%20Manual/WebHome/1656057538793-888.png?rev=1.1||alt="1656057538793-888.png"]] |
![]() |
21.2 | 174 | |
![]() |
66.3 | 175 | == 3.4 Installation Notice == |
![]() |
21.2 | 176 | |
![]() |
67.2 | 177 | |
![]() |
66.3 | 178 | Do not power on while connect the cables. Double check the wiring before power on. |
179 | |||
180 | [[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/Dragino%20LoRaWAN%20Weather%20Station%20User%20Manual/WebHome/1656057557191-895.png?rev=1.1||alt="1656057557191-895.png"]] | ||
181 | |||
182 | [[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/Dragino%20LoRaWAN%20Weather%20Station%20User%20Manual/WebHome/1656057565783-251.png?rev=1.1||alt="1656057565783-251.png"]] | ||
183 | |||
184 | |||
![]() |
65.2 | 185 | = 4. Total Solar Radiation sensor ~-~- WSS-26 = |
![]() |
21.2 | 186 | |
![]() |
67.2 | 187 | |
![]() |
65.2 | 188 | WSS-26 is Total Radiation Sensor can be used to measure the total solar radiation in the spectral range of 0.3 to 3 μm (300 to 3000 nm). If the sensor face is down, the reflected radiation can be measured, and the shading ring can also be used to measure the scattered radiation. |
![]() |
21.2 | 189 | |
![]() |
67.2 | 190 | The core device of the radiation sensor is a high-precision photosensitive element, which has good stability and high precision; at the same time, a precision-machined PTTE radiation cover is installed outside the sensing element, which effectively prevents environmental factors from affecting its performance. |
![]() |
21.2 | 191 | |
![]() |
67.2 | 192 | |
![]() |
65.2 | 193 | == 4.1 Feature == |
![]() |
21.2 | 194 | |
![]() |
67.2 | 195 | |
![]() |
65.2 | 196 | * RS485 Total Solar Radiation sensor |
197 | * Measure Total Radiation between 0.3 ~~ 3μm(300 ~~ 3000nm) | ||
198 | * Measure Reflected Radiation if sense area towards ground. | ||
199 | |||
200 | == 4.2 Specification == | ||
201 | |||
![]() |
67.2 | 202 | |
203 | (% id="cke_bm_101984S" style="display:none" %) | ||
204 | |||
![]() |
65.2 | 205 | * Input Power: DC 5 ~~ 24v |
206 | * Interface: RS485 | ||
207 | * Detect spectrum: 0.3 ~~ 3μm(300~3000nm) | ||
208 | * Measure strength range: 0 ~~ 2000W/m2 | ||
209 | * Resolution: 0.1W/m2 | ||
210 | * Accuracy: ±3% | ||
211 | * Yearly Stability: ≤±2% | ||
212 | * Cosine response: ≤7% (@ Sun angle 10°) | ||
213 | * Temperature Effect: ±2% (-10℃ ~~ 40℃) | ||
214 | * Working Temperature: -40℃ ~~ 70℃ | ||
215 | * Working Humidity: 10 ~~ 90%RH | ||
216 | * Power Consumption: 4mA @ 12v | ||
217 | |||
![]() |
24.2 | 218 | == 4.2 Wiring == |
219 | |||
220 | |||
![]() |
63.1 | 221 | [[image:image-20250505193313-7.png||height="391" width="722"]] |
![]() |
24.2 | 222 | |
![]() |
46.1 | 223 | == 4.3 Device Dimension == |
![]() |
24.2 | 224 | |
![]() |
65.2 | 225 | [[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/Dragino%20LoRaWAN%20Weather%20Station%20User%20Manual/WebHome/1656057348695-898.png?rev=1.1||alt="1656057348695-898.png"]] |
![]() |
24.2 | 226 | |
227 | |||
![]() |
65.2 | 228 | == 4.4 Installation Notice == |
![]() |
24.2 | 229 | |
![]() |
67.2 | 230 | |
![]() |
65.2 | 231 | Do not power on while connect the cables. Double check the wiring before power on. |
![]() |
24.2 | 232 | |
![]() |
65.2 | 233 | [[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/Dragino%20LoRaWAN%20Weather%20Station%20User%20Manual/WebHome/1656057369259-804.png?rev=1.1||alt="1656057369259-804.png"]] |
![]() |
24.2 | 234 | |
![]() |
65.2 | 235 | [[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/Dragino%20LoRaWAN%20Weather%20Station%20User%20Manual/WebHome/1656057377943-564.png?rev=1.1||alt="1656057377943-564.png"]] |
![]() |
24.2 | 236 | |
237 | |||
![]() |
65.2 | 238 | = 5. Temperature, Humidity, Illuminance, Pressure ~-~- WSS-25 = |
239 | |||
![]() |
67.2 | 240 | |
![]() |
65.2 | 241 | WSS-25 is a 4 in 1 RS485 sensor which can monitor Temperature, Humidity, Illuminance and Pressure at the same time. |
242 | |||
![]() |
67.2 | 243 | |
![]() |
65.2 | 244 | == 5.1 Feature == |
245 | |||
![]() |
67.2 | 246 | |
![]() |
65.2 | 247 | * RS485 Temperature, Humidity, Illuminance, Pressure sensor |
248 | |||
![]() |
67.2 | 249 | |
![]() |
65.2 | 250 | == 5.2 Specification == |
251 | |||
252 | |||
253 | * Input Power: DC 12 ~~ 24v | ||
254 | * Interface: RS485 | ||
255 | * Temperature Sensor Spec: | ||
256 | ** Range: -30 ~~ 70℃ | ||
257 | ** resolution 0.1℃ | ||
258 | ** Accuracy: ±0.5℃ | ||
259 | * Humidity Sensor Spec: | ||
260 | ** Range: 0 ~~ 100% RH | ||
261 | ** resolution 0.1 %RH | ||
![]() |
67.2 | 262 | ** Accuracy: ±3% RH |
![]() |
65.2 | 263 | * Pressure Sensor Spec: |
264 | ** Range: 10 ~~ 1100hPa | ||
265 | ** Resolution: 0.1hPa | ||
266 | ** Accuracy: ±0.1hPa | ||
267 | * Illuminate sensor: | ||
268 | ** Range: 0~~2/20/200kLux | ||
269 | ** Resolution: 10 Lux | ||
270 | ** Accuracy: ±3%FS | ||
271 | * Working Temperature: -30℃ ~~ 70℃ | ||
272 | * Working Humidity: 10 ~~ 90%RH | ||
273 | * Power Consumption: 4mA @ 12v | ||
274 | |||
![]() |
29.2 | 275 | == 5.2 Wiring == |
![]() |
25.2 | 276 | |
![]() |
29.2 | 277 | |
![]() |
63.1 | 278 | [[image:image-20250505193252-6.png||height="409" width="765"]] |
![]() |
29.2 | 279 | |
![]() |
65.2 | 280 | == 5.3 Dimension == |
![]() |
29.2 | 281 | |
282 | |||
![]() |
65.2 | 283 | [[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/Dragino%20LoRaWAN%20Weather%20Station%20User%20Manual/WebHome/1656057170639-522.png?rev=1.1||alt="1656057170639-522.png"]] |
![]() |
29.2 | 284 | |
285 | |||
![]() |
66.2 | 286 | == 5.4 Installation Notice == |
287 | |||
![]() |
67.2 | 288 | |
![]() |
66.2 | 289 | Do not power on while connect the cables. Double check the wiring before power on. |
290 | |||
291 | [[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/Dragino%20LoRaWAN%20Weather%20Station%20User%20Manual/WebHome/1656057199955-514.png?rev=1.1||alt="1656057199955-514.png"]] | ||
292 | |||
293 | [[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/Dragino%20LoRaWAN%20Weather%20Station%20User%20Manual/WebHome/1656057212438-475.png?rev=1.1||alt="1656057212438-475.png"]] | ||
294 | |||
295 | |||
![]() |
65.2 | 296 | = 6. Rain/Snow Detect ~-~- WSS-24 = |
![]() |
29.2 | 297 | |
![]() |
67.2 | 298 | |
![]() |
65.2 | 299 | WSS-24 is a RS485 rain / snow detect sensor. It can monitor Rain or Snow event. |
![]() |
29.2 | 300 | |
![]() |
65.2 | 301 | WSS-24 has auto heating feature, this ensures measurement more reliable. |
![]() |
29.2 | 302 | |
![]() |
67.2 | 303 | == 6.1 Feature == |
![]() |
29.2 | 304 | |
![]() |
67.2 | 305 | |
![]() |
65.2 | 306 | * RS485 Rain/Snow detect sensor |
307 | * Surface heating to dry | ||
308 | * grid electrode uses Electroless Nickel/Immersion Gold design for resist corrosion | ||
![]() |
29.2 | 309 | |
![]() |
67.2 | 310 | == 6.2 Specification == |
![]() |
65.2 | 311 | |
![]() |
67.2 | 312 | |
![]() |
65.2 | 313 | * Detect if there is rain or snow |
314 | * Input Power: DC 12 ~~ 24v | ||
315 | * Interface: RS485 | ||
316 | * Working Temperature: -30℃ ~~ 70℃ | ||
317 | * Working Humidity: 10 ~~ 90%RH | ||
318 | * Power Consumption: | ||
319 | ** No heating: 12mA @ 12v, | ||
320 | ** heating: 94ma @ 12v. | ||
321 | |||
![]() |
32.2 | 322 | == 6.2 Wiring == |
![]() |
29.2 | 323 | |
![]() |
63.1 | 324 | [[image:image-20250505193053-5.png]] |
![]() |
29.2 | 325 | |
![]() |
65.2 | 326 | == 6.3 Dimension == |
![]() |
32.2 | 327 | |
328 | [[image:image-20250505144906-15.png]] | ||
329 | |||
330 | |||
![]() |
65.2 | 331 | == 6.4 Installation Notice == |
![]() |
32.2 | 332 | |
![]() |
67.2 | 333 | |
![]() |
65.2 | 334 | Do not power on while connect the cables. Double check the wiring before power on. |
![]() |
63.2 | 335 | |
![]() |
65.2 | 336 | Install with 15°degree. |
![]() |
32.2 | 337 | |
![]() |
65.2 | 338 | [[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/Dragino%20LoRaWAN%20Weather%20Station%20User%20Manual/WebHome/1656056873783-780.png?rev=1.1||alt="1656056873783-780.png"]] |
![]() |
32.2 | 339 | |
![]() |
65.2 | 340 | [[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/Dragino%20LoRaWAN%20Weather%20Station%20User%20Manual/WebHome/1656056883736-804.png?rev=1.1||alt="1656056883736-804.png"]] |
![]() |
32.2 | 341 | |
![]() |
66.1 | 342 | == 6.5 Heating == |
![]() |
32.2 | 343 | |
![]() |
67.2 | 344 | |
![]() |
66.1 | 345 | WSS-24 supports auto-heat feature. When the temperature is below the heat start temperature 15℃, WSS-04 starts to heat and stop at stop temperature (default is 25℃). |
346 | |||
347 | |||
![]() |
65.2 | 348 | = 7. CO2/PM2.5/PM10 ~-~- WSS-23 = |
![]() |
32.2 | 349 | |
![]() |
67.2 | 350 | |
![]() |
65.2 | 351 | WSS-23 is a RS485 Air Quality sensor. It can monitor CO2, PM2.5 and PM10 at the same time. |
![]() |
32.2 | 352 | |
![]() |
65.2 | 353 | WSS-23 uses weather proof shield which can make sure the sensors are well protected against UV & radiation. |
![]() |
34.1 | 354 | |
![]() |
67.2 | 355 | |
![]() |
65.2 | 356 | == 7.1 Feature == |
![]() |
47.1 | 357 | |
![]() |
67.2 | 358 | |
![]() |
65.2 | 359 | * RS485 CO2, PM2.5, PM10 sensor |
360 | * NDIR to measure CO2 with Internal Temperature Compensation | ||
361 | * Laser Beam Scattering to PM2.5 and PM10 | ||
![]() |
47.1 | 362 | |
![]() |
65.2 | 363 | == 7.2 Specification == |
![]() |
47.1 | 364 | |
![]() |
67.2 | 365 | |
![]() |
65.2 | 366 | * CO2 Range: 0 ~~ 5000ppm, accuracy: ±3%F•S(25℃) |
367 | * CO2 resolution: 1ppm | ||
368 | * PM2.5/PM10 Range: 0 ~~ 1000μg/m3 , accuracy ±3%F•S(25℃) | ||
369 | * PM2.5/PM10 resolution: 1μg/m3 | ||
370 | * Input Power: DC 7 ~~ 24v | ||
371 | * Preheat time: 3min | ||
372 | * Interface: RS485 | ||
373 | * Working Temperature: | ||
374 | ** CO2: 0℃ ~~ 50℃; | ||
375 | ** PM2.5/PM10: -30 ~~ 50℃ | ||
376 | * Working Humidity: | ||
377 | ** PM2.5/PM10: 15 ~~ 80%RH (no dewing) | ||
378 | ** CO2: 0 ~~ 95%RH | ||
379 | * Power Consumption: 50mA@ 12v. | ||
![]() |
47.1 | 380 | |
![]() |
46.1 | 381 | == 7.2 Wiring == |
![]() |
34.1 | 382 | |
![]() |
63.1 | 383 | [[image:image-20250505193033-4.png||height="376" width="689"]] |
![]() |
46.1 | 384 | |
385 | == 7.3 Device Dimension == | ||
386 | |||
387 | |||
![]() |
65.2 | 388 | [[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/Dragino%20LoRaWAN%20Weather%20Station%20User%20Manual/WebHome/1656056708366-230.png?rev=1.1||alt="1656056708366-230.png"]] |
![]() |
46.1 | 389 | |
390 | |||
![]() |
65.2 | 391 | == 7.4 Installation Notice == |
392 | |||
![]() |
67.2 | 393 | |
![]() |
65.2 | 394 | Do not power on while connect the cables. Double check the wiring before power on. |
395 | |||
396 | [[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/Dragino%20LoRaWAN%20Weather%20Station%20User%20Manual/WebHome/1656056751153-304.png?rev=1.1||alt="1656056751153-304.png"]] | ||
397 | |||
398 | [[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/Dragino%20LoRaWAN%20Weather%20Station%20User%20Manual/WebHome/1656056766224-773.png?rev=1.1||alt="1656056766224-773.png"]] | ||
399 | |||
400 | |||
![]() |
46.1 | 401 | = 8. WSS-22 Integrated wind speed and direction sensor = |
402 | |||
403 | [[image:1746441120854-584.png||height="271" width="394"]] | ||
404 | |||
![]() |
65.2 | 405 | WSS-22 is a RS485 wind speed and wind direction monitor designed for weather station solution. |
![]() |
46.1 | 406 | |
![]() |
65.2 | 407 | WSS-22 shell is made of polycarbonate composite material, which has good anti-corrosion and anti-corrosion characteristics, and ensure the long-term use of the sensor without rust. At the same time, it cooperates with the internal smooth bearing system to ensure the stability of information collection |
408 | |||
409 | |||
410 | == 8.1 Feature == | ||
411 | |||
412 | * RS485 wind speed / direction sensor | ||
413 | * PC enclosure, resist corrosion | ||
414 | |||
415 | == 8.2 Specification == | ||
416 | |||
417 | * Wind speed range: 0 ~~ 60m/s | ||
418 | * Wind direction range: 0 ~~ 360° | ||
419 | * Start wind speed: ≤0.3 m/s | ||
420 | * Accuracy: ±(0.3+0.03V) m/s , ±1° | ||
421 | * Input Power: DC 5 ~~ 24v | ||
422 | * Interface: RS485 | ||
423 | * Working Temperature: -30℃ ~~ 70℃ | ||
424 | * Working Humidity: <100% (no dewing) | ||
![]() |
67.2 | 425 | * Power Consumption: 13mA @ 12v. |
![]() |
65.2 | 426 | * Cable Length: 2 meters |
427 | |||
![]() |
46.1 | 428 | == 8.2 Wiring == |
429 | |||
![]() |
63.1 | 430 | [[image:image-20250505192929-2.png||height="314" width="590"]] |
![]() |
46.1 | 431 | |
432 | |||
433 | == 8.3 Device Dimension == | ||
434 | |||
![]() |
65.2 | 435 | (% class="wikigeneratedid" %) |
436 | [[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/Dragino%20LoRaWAN%20Weather%20Station%20User%20Manual/WebHome/image-20220624152813-2.png?rev=1.1||alt="image-20220624152813-2.png"]] | ||
![]() |
46.1 | 437 | |
![]() |
65.2 | 438 | == 8.4 Angle Mapping == |
![]() |
46.1 | 439 | |
![]() |
65.2 | 440 | [[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/Dragino%20LoRaWAN%20Weather%20Station%20User%20Manual/WebHome/1656056303845-585.png?rev=1.1||alt="1656056303845-585.png"]] |
![]() |
46.1 | 441 | |
442 | |||
![]() |
65.2 | 443 | == 8.4 Installation Notice == |
![]() |
46.1 | 444 | |
![]() |
65.2 | 445 | Do not power on while connect the cables. Double check the wiring before power on. |
446 | |||
447 | The sensor must be installed with below direction, towards North. | ||
448 | |||
![]() |
46.1 | 449 | [[image:1746441560175-162.png||height="304" width="484"]] |
450 | |||
451 | |||
![]() |
65.2 | 452 | = 9. Rain Gauge ~-~- WSS-21 = |
![]() |
46.1 | 453 | |
![]() |
67.2 | 454 | |
![]() |
65.2 | 455 | WSS-21 RS485 Rain Gauge is used in meteorology and hydrology to gather and measure the amount of liquid precipitation (mainly rainfall) over an area. |
![]() |
46.1 | 456 | |
![]() |
65.2 | 457 | WSS-21 uses a tipping bucket to detect rainfall. The tipping bucket use 3D streamline shape to make sure it works smoothly and is easy to clean. |
![]() |
46.1 | 458 | |
![]() |
65.2 | 459 | The tipping bucket of WSS-01 is adjusted to the best angle. When installation, user only needs to screw up and adjust the bottom horizontally. |
![]() |
46.1 | 460 | |
![]() |
65.2 | 461 | WSS-21 package includes screw which can be installed to ground. If user want to install WSS-21 on pole, they can purchase WS-K2 bracket kit. |
462 | |||
![]() |
67.2 | 463 | |
![]() |
65.2 | 464 | == 9.1 Feature == |
465 | |||
466 | * RS485 Rain Gauge | ||
467 | * Small dimension, easy to install | ||
468 | * Vents under funnel, avoid leaf or other things to avoid rain flow. | ||
469 | * ABS enclosure. | ||
470 | * Horizontal adjustable. | ||
471 | |||
472 | == 9.2 Specification == | ||
473 | |||
![]() |
46.1 | 474 | * Resolution: 0.2mm |
![]() |
65.2 | 475 | * Accuracy: ±3% |
476 | * Range: 0 ~~ 100mm | ||
477 | * Rainfall strength: 0mm ~~ 4mm/min (max 8mm/min) | ||
478 | * Input Power: DC 5 ~~ 24v | ||
479 | * Interface: RS485 | ||
480 | * Working Temperature: 0℃ ~~ 70℃ (incorrect below 0 degree, because water become ICE) | ||
481 | * Working Humidity: <100% (no dewing) | ||
482 | * Power Consumption: 4mA @ 12v. | ||
![]() |
46.1 | 483 | |
![]() |
65.2 | 484 | == 9.3 Wiring == |
![]() |
46.1 | 485 | |
![]() |
63.1 | 486 | [[image:image-20250505192952-3.png||height="305" width="581"]] |
![]() |
46.1 | 487 | |
488 | |||
![]() |
65.2 | 489 | == 9.3 Dimension == |
![]() |
46.1 | 490 | |
491 | |||
492 | [[image:image-20250505184528-20.png||height="468" width="471"]] | ||
493 | |||
494 | [[image:image-20250505185334-22.png||height="533" width="470"]] | ||
![]() |
65.2 | 495 | |
496 | == 9.4 Installation Notice == | ||
497 | |||
498 | |||
499 | ((( | ||
500 | Do not power on while connect the cables. Double check the wiring before power on. | ||
501 | ))) | ||
502 | |||
503 | ((( | ||
504 | Installation Photo as reference: | ||
505 | ))) | ||
506 | |||
507 | |||
508 | ((( | ||
509 | (% style="color:#4472c4" %)** Install on Ground:** | ||
510 | ))) | ||
511 | |||
512 | ((( | ||
513 | WSS-21 Rain Gauge include screws so can install in ground directly . | ||
514 | ))) | ||
515 | |||
516 | |||
517 | ((( | ||
518 | (% style="color:#4472c4" %)** Install on pole:** | ||
519 | ))) | ||
520 | |||
521 | ((( | ||
522 | If user want to install on pole, they can purchase the (% style="color:#4472c4" %)** WS-K2 : Bracket Kit for Pole installation**(%%), and install as below: | ||
523 | |||
524 | [[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/Dragino%20LoRaWAN%20Weather%20Station%20User%20Manual/WebHome/image-20220624152218-1.png?width=276&height=526&rev=1.1||alt="image-20220624152218-1.png"]] | ||
525 | |||
526 | WS-K2: Bracket Kit for Pole installation | ||
527 | |||
528 | WSSC-K2 dimension document, please see: | ||
529 | ))) | ||
530 | |||
531 | [[https:~~/~~/www.dropbox.com/sh/7wa2elfm2q8xq4l/AAB7ZB_gSVGrhmJEgU2LyTQNa?dl=0>>https://www.dropbox.com/sh/7wa2elfm2q8xq4l/AAB7ZB_gSVGrhmJEgU2LyTQNa?dl=0]] | ||
![]() |
67.2 | 532 | |
533 |