Changes for page Point to Point Communication of LT-22222-L
Last modified by Edwin Chen on 2022/11/22 09:38
Summary
-
Page properties (1 modified, 0 added, 0 removed)
Details
- Page properties
-
- Content
-
... ... @@ -38,7 +38,6 @@ 38 38 |AT+DI2TODO2=2 |AT+DI2TODO2=2 39 39 |AT+DI2TORO2=2|AT+DI2TORO2=2 40 40 41 - 42 42 == **2.2 Point To Mult-Point ** == 43 43 44 44 ... ... @@ -77,7 +77,7 @@ 77 77 78 78 (% style="color:#037691" %)**AT+RXSF **(%%)**:** Get or Set the spreading factor of RX (7 to 12) (default:12) 79 79 80 -(% style="color:#037691" %)**AT+BW **(%%)**: 79 +(% style="color:#037691" %)**AT+BW **(%%)**: **Get or Set the bandwidth [0:125khz,1:250khz,2:500khz] (default:0) 81 81 82 82 (% style="color:#037691" %)**AT+CR **(%%)**: **Get or Set the coding rate [1: 4/5, 2: 4/6, 3: 4/7, 4: 4/8] (default:1) 83 83 ... ... @@ -85,11 +85,13 @@ 85 85 86 86 (% style="color:#037691" %)**AT+VER **(%%)**:** Get firmware version number 87 87 88 -(% style="color:#037691" %)**AT+SEND **(%%)**: 87 +(% style="color:#037691" %)**AT+SEND **(%%)**: **Set Custom sent hex data 89 89 90 90 (% style="color:#037691" %)**AT+GROUPMOD **(%%)**: **Set or Get the grouping mode of the device (default: 0) 91 91 91 +((( 92 92 (% style="color:#037691" %)**AT+GROUPID **(%%)**: **Set or Get the password for matching between TX group and RX group, which can be composed of numbers or characters (default: 12345678) 93 +))) 93 93 94 94 (% style="color:#037691" %)**AT+TRIG1 **(%%)**:** Set or Get the DI1 pin interrupt trigger mode (default 0,0) 95 95 ... ... @@ -159,7 +159,9 @@ 159 159 160 160 **AT+GROUPMOD=0,aa** Set the TX group that controls the number of aa (The maximum value of aa is 8) 161 161 163 +((( 162 162 **AT+GROUPMOD=1,bb** Set to the RX group controlled by the TX group, numbered bb(The maximum value of aa is 8) 165 +))) 163 163 164 164 **AT+GROUPMOD=0,2** Set to control the TX group of the two RX groups 165 165 ... ... @@ -193,13 +193,17 @@ 193 193 194 194 (% style="color:#037691" %)**The third byte**(%%)**:** ACK returned to the sender after the mapping is completed. 195 195 199 +((( 196 196 (% style="color:#037691" %)**The fourth byte**(%%)**:** the high four bits are 1 to represent DI1, and the low four bits are the level of DI1 when the interrupt is triggered. 201 +))) 197 197 198 198 (% style="color:#037691" %)**The Fifth byte**(%%)**: **DI1TODO1 when the interrupt is triggered, 0 when the interrupt is not triggered. 199 199 200 200 (% style="color:#037691" %)**The Sixth byte**(%%)**:** 0 does not trigger interrupt when DI1TORO1 interrupt is triggered. 201 201 207 +((( 202 202 (% style="color:#037691" %)**The seventh byte**(%%)**:** the high four bits are 2 to represent DI2, and the low four bits are the level of DI2 when the interrupt is triggered. 209 +))) 203 203 204 204 (% style="color:#037691" %)**The 8th byte**(%%)**: **DI2TODO2 when the interrupt is triggered, 0 when the interrupt is not triggered. 205 205