Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -77,7 +77,7 @@
77	77
78	78	(% style="color:#037691" %)**AT+RXSF **(%%)**:**  Get or Set the spreading factor of RX (7 to 12) (default:12)
79	79
80		-(% style="color:#037691" %)**AT+BW **(%%)**:  **Get or Set the bandwidth [0:125khz,1:250khz,2:500khz] (default:0)
	80	+(% style="color:#037691" %)**AT+BW **(%%)**:       **Get or Set the bandwidth [0:125khz,1:250khz,2:500khz] (default:0)
81	81
82	82	(% style="color:#037691" %)**AT+CR **(%%)**:        **Get or Set the coding rate [1: 4/5, 2: 4/6, 3: 4/7, 4: 4/8] (default:1)
83	83
...	...	@@ -85,11 +85,13 @@
85	85
86	86	(% style="color:#037691" %)**AT+VER **(%%)**:**  Get firmware version number
87	87
88		-(% style="color:#037691" %)**AT+SEND **(%%)**:  **Set Custom sent hex data
	88	+(% style="color:#037691" %)**AT+SEND **(%%)**:   **Set Custom sent hex data
89	89
90	90	(% style="color:#037691" %)**AT+GROUPMOD **(%%)**: **Set or Get the grouping mode of the device (default: 0)
91	91
	92	+(((
92	92	(% style="color:#037691" %)**AT+GROUPID **(%%)**:      **Set or Get the password for matching between TX group and RX group, which can be composed of numbers or characters (default: 12345678)
	94	+)))
93	93
94	94	(% style="color:#037691" %)**AT+TRIG1 **(%%)**:**  Set or Get the DI1 pin interrupt trigger mode (default 0,0)
95	95
...	...	@@ -159,7 +159,9 @@
159	159
160	160	**AT+GROUPMOD=0,aa**  Set the TX group that controls the number of aa (The maximum value of aa is 8)
161	161
	164	+(((
162	162	**AT+GROUPMOD=1,bb**  Set to the RX group controlled by the TX group, numbered bb(The maximum value of aa is 8)
	166	+)))
163	163
164	164	**AT+GROUPMOD=0,2**  Set to control the TX group of the two RX groups
165	165
...	...	@@ -193,13 +193,17 @@
193	193
194	194	(% style="color:#037691" %)**The third byte**(%%)**:**  ACK returned to the sender after the mapping is completed.
195	195
	200	+(((
196	196	(% style="color:#037691" %)**The fourth byte**(%%)**:**  the high four bits are 1 to represent DI1, and the low four bits are the level of DI1 when the interrupt is triggered.
	202	+)))
197	197
198	198	(% style="color:#037691" %)**The Fifth byte**(%%)**:       **DI1TODO1 when the interrupt is triggered, 0 when the interrupt is not triggered.
199	199
200	200	(% style="color:#037691" %)**The Sixth byte**(%%)**:**  0 does not trigger interrupt when DI1TORO1 interrupt is triggered.
201	201
	208	+(((
202	202	(% style="color:#037691" %)**The seventh byte**(%%)**:**  the high four bits are 2 to represent DI2, and the low four bits are the level of DI2 when the interrupt is triggered.
	210	+)))
203	203
204	204	(% style="color:#037691" %)**The 8th byte**(%%)**:          **DI2TODO2 when the interrupt is triggered, 0 when the interrupt is not triggered.
205	205