Last modified by Edwin Chen on 2022/11/22 09:38
<
From version < 25.1 >
edited by Edwin Chen
on 2022/11/19 09:37
To version < 11.2 >
edited by Xiaoling
on 2022/06/02 14:33
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -Point to Point Communication of LT-22222-L
1 + Point to Point Communication of LT-22222-L
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Edwin
1 +XWiki.Xiaoling
Content
... ... @@ -1,693 +1,215 @@
1 -**Table of Contents： **
2 -
1 +{{box cssClass="floatinginfobox" title="**Contents**"}}
3 3  {{toc/}}
3 +{{/box}}
4 4  
5 += **1. Overview** =
5 5  
6 -
7 -
8 -= 1. Overview =
9 -
10 10  (((
11 -
12 -
13 13  Shipped LT-22222-L is base on LoRaWAN protocol. We also develop a open source Point to Point LoRa protocol for LT-22222-L. The source code and hex file can be found at:
9 +)))
14 14  
15 -* [[Source Code>>https://github.com/dragino/LT-22222-L]].
16 -* [[Firmware>>https://github.com/dragino/LT-22222-L/releases]].
11 +(((
12 +[[Point to Point Software for LT-22222-L>>https://github.com/dragino/LT-22222-L]].
17 17  )))
18 18  
19 -= 2. Features for this firmware =
15 +== ==
20 20  
21 -== 2.1  Point To Point ==
17 += **2. Features for this firmware** =
22 22  
23 -=== 2.1.1 Overview ===
24 24  
20 +== **2.1  Point To Point** ==
25 25  
22 +
26 26  [[image:image-20220602111219-1.png||height="472" width="972"]]
27 27  
28 28  
29 -=== 2.2.2 Configure ===
26 +(% class="wikigeneratedid" id="H2.2.Configure" %)
27 +(% style="color:blue" %)**Configure:**
30 30  
29 +(% border="1" style="background-color:#f7faff; color:black; width:500px" %)
30 +|=**A's configuration**|=**B's configuration**
31 +|AT+GROUPMOD=0|AT+GROUPMOD=0
32 +|AT+TXCHS=868700000|AT+TXCHS=869000000
33 +|AT+RXCHS=869000000|AT+RXCHS=868700000
34 +|AT+TRIG1=2,50|AT+TRIG1=2,50
35 +|AT+TRIG2=2,50|AT+TRIG2=2,50
36 +|AT+DI1TODO1=2|AT+DI1TODO1=2
37 +|AT+DI1TORO1=2|AT+DI1TORO1=2
38 +|AT+DI2TODO2=2 |AT+DI2TODO2=2
39 +|AT+DI2TORO2=2|AT+DI2TORO2=2
31 31  
32 -(% border="1" style="background-color:#f7faff; color:black; width:360px" %)
33 -|=(% style="width: 179px;" %)**A's configuration**|=(% style="width: 177px;" %)**B's configuration**
34 -|(% style="width:179px" %)AT+GROUPMOD=0|(% style="width:177px" %)AT+GROUPMOD=0
35 -|(% style="width:179px" %)AT+TXCHS=868700000|(% style="width:177px" %)AT+TXCHS=869000000
36 -|(% style="width:179px" %)AT+RXCHS=869000000|(% style="width:177px" %)AT+RXCHS=868700000
37 -|(% style="width:179px" %)AT+TRIG1=2,50|(% style="width:177px" %)AT+TRIG1=2,50
38 -|(% style="width:179px" %)AT+TRIG2=2,50|(% style="width:177px" %)AT+TRIG2=2,50
39 -|(% style="width:179px" %)AT+DI1TODO1=2|(% style="width:177px" %)AT+DI1TODO1=2
40 -|(% style="width:179px" %)AT+DI1TORO1=2|(% style="width:177px" %)AT+DI1TORO1=2
41 -|(% style="width:179px" %)AT+DI2TODO2=2 |(% style="width:177px" %)AT+DI2TODO2=2
42 -|(% style="width:179px" %)AT+DI2TORO2=2|(% style="width:177px" %)AT+DI2TORO2=2
41 +== **2.2  Point To Mult-Point ** ==
43 43  
44 -=== 2.2.3 Serial port display ===
45 45  
46 -
47 -(% class="wikigeneratedid" %)
48 48  [[image:image-20220602111219-2.png]]
49 49  
50 50  
51 -(% class="wikigeneratedid" %)
52 52  [[image:image-20220602111219-3.png]]
53 53  
54 -
55 -(% class="wikigeneratedid" %)
56 -If the sender does not get the ACK reply from the receiver, it will retransmit up to 4 times, each interval is 6 seconds, and the UplinkCounter of the retransmission will not increase.
57 -
58 -
59 -== 2.2  Point To Mult-Point ==
60 -
61 -=== 2.2.1 Overview ===
62 -
63 -
64 -[[image:1654152390874-192.png]]
65 -
66 -
67 -=== 2.2.2  Configure ===
68 -
69 -
70 -(% style="color:blue" %)**Configuration of the TX group:**
71 -
72 -AT+GROUPMOD=0,2
73 -
74 -AT+TXCHS=868700000
75 -
76 -AT+RXCHS=869000000
77 -
78 -AT+TRIG1=2,50
79 -
80 -AT+TRIG2=2,50
81 -
82 -AT+DI1TODO1=1
83 -
84 -AT+DI1TORO1=1
85 -
86 -AT+DI2TODO2=1
87 -
88 -AT+DI2TORO2=1
89 -
90 -
91 -(% style="color:blue" %)**Configuration for RX group number 1:**
92 -
93 -AT+GROUPMOD=1,1
94 -
95 -AT+TXCHS=869000000
96 -
97 -AT+RXCHS=868700000
98 -
99 -
100 -(% style="color:blue" %)**Configuration for RX group number 2:**
101 -
102 -AT+GROUPMOD=1,2
103 -
104 -AT+TXCHS=869000000
105 -
106 -AT+RXCHS=868700000
107 -
108 -
109 -=== 2.2.3 Serial port display ===
110 -
111 -
112 -[[image:image-20220602144747-1.png]]
113 -
114 -
115 -[[image:image-20220602144747-2.png]]
116 -
117 -
118 118  (((
119 -If the TX group does not receive all the ACK replies from the RX group, it will retransmit up to 4 times, each time interval is 30 seconds, and the retransmission UplinkCounter will not increase.
50 +If the sender does not get the ACK reply from the receiver, it will retransmit up to 4 times, each interval is 6 seconds, and the UplinkCounter of the retransmission will not increase.
120 120  )))
121 121  
122 122  
123 -== 2.3 AT command ==
54 +== **2.3 AT command** ==
124 124  
125 125  
126 -(((
127 127  (% style="color:#037691" %)**ATZ** (%%)**: ** Trig a reset of the MCU
128 -)))
129 129  
130 -(((
131 131  (% style="color:#037691" %)**AT+FDR** (%%)**:**  Reset Parameters to Factory Default, Keys Reserve
132 -)))
133 133  
134 -(((
135 135  (% style="color:#037691" %)**AT+FCU** (%%)**:**  Get or Set the Frame Counter Uplink
136 -)))
137 137  
138 -(((
139 139  (% style="color:#037691" %)**AT+FCD** (%%)**:**  Get or Set the Frame Counter Downlink
140 -)))
141 141  
142 -(((
143 143  (% style="color:#037691" %)**AT+TXP** (%%)**:**  Get or Set the transmit power, the maximum is 20dBm (default is 14dBm)
144 -)))
145 145  
146 -(((
147 147  (% style="color:#037691" %)**AT+SYNC** (%%)**:**  Get or Set the Sync word [1:0x34,0:0x12] (default is 1)
148 -)))
149 149  
150 -(((
151 151  (% style="color:#037691" %)**AT+PMB** (%%)**:    **Get or Set the preamble (default:8)
152 -)))
153 153  
154 -(((
155 155  (% style="color:#037691" %)**AT+TXCHS **(%%)**:** Get or Set the transmit frequency of TX (default:868700000)
156 -)))
157 157  
158 -(((
159 159  (% style="color:#037691" %)**AT+TXSF **(%%)**:**  Get or Set the spreading factor of TX (7 to 12) (default:12)
160 -)))
161 161  
162 -(((
163 163  (% style="color:#037691" %)**AT+RXCHS **(%%)**:** Get or Set the transmit frequency of RX (default:869000000)
164 -)))
165 165  
166 -(((
167 167  (% style="color:#037691" %)**AT+RXSF **(%%)**:**  Get or Set the spreading factor of RX (7 to 12) (default:12)
168 -)))
169 169  
170 -(((
171 171  (% style="color:#037691" %)**AT+BW **(%%)**:       **Get or Set the bandwidth [0:125khz,1:250khz,2:500khz] (default:0)
172 -)))
173 173  
174 -(((
175 175  (% style="color:#037691" %)**AT+CR **(%%)**:        **Get or Set the coding rate [1: 4/5, 2: 4/6, 3: 4/7, 4: 4/8] (default:1)
176 -)))
177 177  
178 -(((
179 179  (% style="color:#037691" %)**AT+TDC **(%%)**:**  Get or set the application data transmission interval in ms(default 10 minutes)
180 -)))
181 181  
182 -(((
183 183  (% style="color:#037691" %)**AT+VER **(%%)**:**  Get firmware version number
184 -)))
185 185  
186 -(((
187 187  (% style="color:#037691" %)**AT+SEND **(%%)**:   **Set Custom sent hex data
188 -)))
189 189  
190 -(((
191 191  (% style="color:#037691" %)**AT+GROUPMOD **(%%)**: **Set or Get the grouping mode of the device (default: 0)
192 -)))
193 193  
194 194  (((
195 -(((
196 196  (% style="color:#037691" %)**AT+GROUPID **(%%)**:      **Set or Get the password for matching between TX group and RX group, which can be composed of numbers or characters (default: 12345678)
197 197  )))
198 -)))
199 199  
200 -(((
201 201  (% style="color:#037691" %)**AT+TRIG1 **(%%)**:**  Set or Get the DI1 pin interrupt trigger mode (default 0,0)
202 -)))
203 203  
204 -(((
205 205  (% style="color:#037691" %)**AT+TRIG2 **(%%)**:            **Set or Get the DI2 pin interrupt trigger mode (default 0,0)
206 -)))
207 207  
208 -(((
209 209  (% style="color:#037691" %)**AT+DI1TODO1 **(%%)**:    **Set or get the mode in which DI1 maps to DO1 (default 0)
210 -)))
211 211  
212 -(((
213 213  (% style="color:#037691" %)**AT+DI1TORO1 **(%%)**:    **Set or get the mode in which DI1 maps to RO1(default 0)
214 -)))
215 215  
216 -(((
217 217  (% style="color:#037691" %)**AT+DI2TODO2 **(%%)**:**  Set or get the mode in which DI2 maps to DO2(default 0)
218 -)))
219 219  
220 -(((
221 221  (% style="color:#037691" %)**AT+DI2TORO2 **(%%)**:    **Set or get the mode in which DI2 maps to RO2(default 0)
222 -)))
223 223  
224 224  
225 -(((
226 -(% style="color:blue" %)**Example 1:**
227 -)))
228 228  
229 -(((
109 +(% style="color:#4f81bd" %)**Example 1:**
110 +
230 230  **AT+SEND=01020304 **will send a payload of 01020304
231 -)))
232 232  
233 233  
234 -(((
235 -(% style="color:blue" %)**Example 2: **
236 -)))
114 +(% style="color:#4f81bd" %)**Example 2: **
237 237  
238 -(((
239 239  **AT+TRIGx=a    **Trigger directly without triggering time
240 -)))
241 241  
242 -(((
243 243  **AT+TRIGx=a,b**
244 -)))
245 245  
246 -(((
247 -**a=0:** falling edge;
248 -)))
120 +a=0: falling edge;
249 249  
250 -(((
251 -**a=1: **rising edge;
252 -)))
122 +a=1: rising edge;
253 253  
254 -(((
255 -**a=2:** falling edge or rising edge;
256 -)))
124 +a=2: falling edge or rising edge;
257 257  
258 -(((
259 -**b:**  triggering time in milliseconds.
260 -)))
126 +b:  triggering time in milliseconds.
261 261  
262 -(((
263 -**AT+TRIGx=2,50**  Falling edge or rising edge trigger, and the trigger time exceeds 50ms.
264 -)))
128 +AT+TRIGx=2,50  Falling edge or rising edge trigger, and the trigger time exceeds 50ms.
265 265  
266 266  
267 -(((
268 -(% style="color:blue" %)**Example 3: **
269 -)))
131 +(% style="color:#4f81bd" %)**Example 3: **
270 270  
271 -(((
272 272  **AT+DI1TODO1= maps value**
273 -)))
274 274  
275 -(((
276 276  **AT+DI1TORO1= maps value**
277 -)))
278 278  
279 -(((
280 280  **AT+DI2TODO2= maps value**
281 -)))
282 282  
283 -(((
284 284  **AT+DI2TORO2= maps value**
285 -)))
286 286  
287 -(((
288 -
289 -)))
290 290  
291 -(% border="1" style="background-color:#f7faff; color:black; width:690px" %)
292 -|=(% style="width: 102px;" %)(((
293 -Maps value
294 -)))|=(% style="width: 331px;" %)(((
295 -DIx to DOx
296 -)))|=(% style="width: 251px;" %)(((
297 -DIx to ROx
298 -)))
299 -|(% style="width:102px" %)(((
300 -0
301 -)))|(% style="width:331px" %)(((
302 -No Action
303 -)))|(% style="width:251px" %)(((
304 -No Action
305 -)))
306 -|(% style="width:102px" %)(((
307 -1
308 -)))|(% style="width:331px" %)(((
309 -If DIx is high, control DOx to output low level, If DIx is low, control DOx to output high level
310 -)))|(% style="width:251px" %)(((
311 -(((
142 +(% border="1" style="background-color:#f7faff; color:black; width:706px" %)
143 +|=(% style="width: 102px;" %)Maps value|=(% style="width: 331px;" %)DIx to DOx|=(% style="width: 268px;" %)DIx to ROx
144 +|(% style="width:102px" %)0|(% style="width:331px" %)No Action|(% style="width:268px" %)No Action
145 +|(% style="width:102px" %)1|(% style="width:331px" %)If DIx is high, control DOx to output low level, If DIx is low, control DOx to output high level|(% style="width:268px" %)(((
312 312  If DIx is high, control ROx to close,
313 -)))
314 314  
315 -(((
316 316  if DIx is low, control ROx to open
317 317  )))
318 -)))
319 -|(% style="width:102px" %)(((
320 -2
321 -)))|(% style="width:331px" %)(((
322 -If DIx is high, control DOx to output high level, If DIx is low, control DOx to output low level
323 -)))|(% style="width:251px" %)(((
324 -(((
150 +|(% style="width:102px" %)2|(% style="width:331px" %)If DIx is high, control DOx to output high level, If DIx is low, control DOx to output low level|(% style="width:268px" %)(((
325 325  If DIx is high, control ROx to open,
326 -)))
327 327  
328 -(((
329 329  if DIx is low, control ROx to close
330 330  )))
331 -)))
332 -|(% style="width:102px" %)(((
333 -3
334 -)))|(% style="width:331px" %)(((
335 -DOx state flip
336 -)))|(% style="width:251px" %)(((
337 -ROx state flip
338 -)))
155 +|(% style="width:102px" %)3|(% style="width:331px" %)DOx state flip|(% style="width:268px" %)ROx state flip
339 339  
340 -(((
341 -
157 +(% style="color:#4f81bd" %)**Example 4: **
342 342  
343 -(% style="color:blue" %)**Example 4: **
344 -)))
345 -
346 -(((
347 347  **AT+GROUPMOD=0**  Set to point to point mode
348 -)))
349 349  
350 -(((
351 351  **AT+GROUPMOD=0,aa**  Set the TX group that controls the number of aa (The maximum value of aa is 8)
352 -)))
353 353  
354 354  (((
355 355  **AT+GROUPMOD=1,bb**  Set to the RX group controlled by the TX group, numbered bb(The maximum value of aa is 8)
356 356  )))
357 357  
358 -(((
359 359  **AT+GROUPMOD=0,2**  Set to control the TX group of the two RX groups
360 -)))
361 361  
362 -(((
363 363  **AT+GROUPMOD=1,1**  Set the RX group numbered 1
364 -)))
365 365  
366 -(((
367 367  **AT+GROUPMOD=1,2**  Set the RX group numbered 2
368 -)))
369 369  
370 370  
371 -=== 2.3.1 TRIG command is configured in the transmit LT. (LT1)(Since firmware 1.3.2) ===
174 +== **2.4 Data Format** ==
372 372  
373 -
374 -**AT+TRIGx=a          **Trigger transmit directly without triggering time
375 -
376 -**AT+TRIGx=a,b**  Trigger transmit with triggering time threshold
377 -
378 -**AT+TRIGx=a,b,c    **Trigger transmit with triggering time threshold, and continue to transmit every xx seconds if DI status no change.
379 -
380 -
381 -**a=0:** falling edge;
382 -
383 -**a=1:** rising edge;
384 -
385 -**a=2:** falling edge or rising edge;
386 -
387 -**b:**  triggering time in milliseconds.
388 -
389 -**c:** transmit interval
390 -
391 -
392 -(% style="color:blue" %)**Use Case 1**(%%):  Once the DI1 port status change ( either from low to high or high to low, LT1 sends a trigger to LT-2)
393 -
394 -**Command:**
395 -
396 -**AT+TRIG1=2,50**  Falling edge or rising edge trigger, and the trigger time should exceed 50ms.
397 -
398 -
399 -(% style="color:blue" %)**Use Case 2:  **(%%)Sync LT2 RO / DO status with LT1 every minute.
400 -
401 -**Command:**
402 -
403 -**AT+TRIG2=2,50,60**  Once there is falling edge or rising edge on DI2 of LT1, LT1 will transmit trigger to LT2 and LT2 can sync the status of RO/DO. After power off, power on, LT1 will send trigger without falling/rising edge, so the DI changes during power off will be sync as well.
404 -
405 -
406 -=== 2.3.2 RO/DO is configured in the receiver LT (LT2)(Since firmware 1.3.2) ===
407 -
408 -
409 -AT+DI1TODO1= maps value[,latch time, timeout_state]
410 -
411 -AT+DI1TORO1= maps value[,latch time, timeout_state]
412 -
413 -AT+DI2TODO2= maps value[,latch time, timeout_state]
414 -
415 -AT+DI2TORO2= maps value[,latch time, timeout_state]
416 -
417 -
418 -(% border="1" style="background-color:#f7faff; color:black; width:774px" %)
419 -|(% style="width:105px" %) **Maps value**|(% style="width:415px" %)**DIx to DOx**|(% style="width:249px" %)**DIx to ROx**
420 -|(% style="width:105px" %)0|(% style="width:415px" %)No Action|(% style="width:249px" %)No Action
421 -|(% style="width:105px" %)1|(% style="width:415px" %)If DIx is high, control DOx to output low level, If DIx is low, control DOx to output high level|(% style="width:249px" %)(((
422 -If DIx is high, control ROx to close,
423 -
424 -if DIx is low, control ROx to open
425 -)))
426 -|(% style="width:105px" %)2|(% style="width:415px" %)If DIx is high, control DOx to output high level, If DIx is low, control DOx to output low level|(% style="width:249px" %)(((
427 -If DIx is high, control ROx to open,
428 -
429 -if DIx is low, control ROx to close
430 -)))
431 -|(% style="width:105px" %)3|(% style="width:415px" %)DOx state flip|(% style="width:249px" %)ROx state flip
432 -
433 -**latch time**, if latch time is defined, DO or RO will go back to the original status after latch time, if there is a new trigger comes, the LT2 will use the new latch time settings and ignore the old one.
434 -
435 -
436 -**Timeout_State**:
437 -
438 -0: **No change** after timeout
439 -
440 -1: Change to **DO:0** or **RO: Open** after timeout
441 -
442 -2: Change to **DO:1** or **RO: Close** after timeout
443 -
444 -3: Change **back to state** before last trigger arrive.
445 -
446 -
447 -(% style="color:blue" %)**Case1**:
448 -
449 -AT+DI1TODO1=1  ~/~/ LT2 DO1 will follow LT1 DI1 trigger command, if DI1 of LT1 is trigger high, DO1 of LT2 will output low, if DI1 of LT1 is trigger low, DO2 of LT2 will output high.
450 -
451 -
452 -(% style="color:blue" %)**Case2**:
453 -
454 -AT+DI1TODO1=1,60,1  ~/~/ LT2 DO1 will follow LT1 DI1 trigger command, DO1 will keep the status 60 seconds and then change to open.
455 -
456 -
457 -=== 2.3.3 Save the RO/DO status during power off(Since firmware 1.3) ===
458 -
459 -
460 -Enable/Disbale retain Digital Output/Relay Output after power off / Power On
461 -
462 -**AT+DOROSAVE=0**  ~/~/ Disable Retain after power off/on
463 -
464 -**AT+DOROSAVE=1**  ~/~/ Enable Retain after power off/on
465 -
466 -**AT+DOROSAVE=2,a,b,c,d**  ~/~/ set DO/RO port to default state after power on.
467 -
468 -**a: **for DO1
469 -
470 -**b:** for DO2
471 -
472 -**c: **for RO1
473 -
474 -**d:** for RO2.
475 -
476 -
477 -**Example:**
478 -
479 -AT+DOROSAVE=2,0,0,0,1  ~/~/ Set DO1/DO2 to Low, RO1 to open after power on , set RO2 to close after power on.
480 -
481 -
482 -=== 2.3.4 Control Sleep status.(Since firmware 1.3) ===
483 -
484 -
485 -DI2 can be used to set LT into sleep mode.
486 -
487 -**AT+DI2SLEEP=1**  ~/~/  Enable DI2 as Sleep pin
488 -
489 -**AT+DI2SLEEP=0**  ~/~/  Disable DI2 as Sleep pin
490 -
491 -When DI2 is enabled as sleep pin, a falling trigger (with 500ms pulse) will set LT into sleep mode. A raising trigger will wake up it again.
492 -
493 -In sleep mode, DORO will keep its initial state if AT+DOROSAVE=2, otherwise DORO will be in OFF state
494 -
495 -
496 -== 2.4 Data Format ==
497 -
498 -
499 -(((
500 500  8 bytes of GROUPID + 9 bytes of payload + 4 bytes of checksum
501 -)))
502 502  
503 -(((
504 -(% style="color:blue" %)**Payload:Payload triggered by TDC or DI**
505 -)))
506 506  
507 -(% border="1" style="background-color:#f7faff; color:black; width:825px" %)
508 -|=(% style="width: 102px;" %)(((
509 -**Size (bytes)**
510 -)))|=(% style="width: 74px;" %)(((
511 -1
512 -)))|=(% style="width: 72px;" %)(((
513 -1
514 -)))|=(% style="width: 47px;" %)(((
515 -1
516 -)))|=(% style="width: 83px;" %)(((
517 -1
518 -)))|=(% style="width: 90px;" %)(((
519 -1
520 -)))|=(% style="width: 92px;" %)(((
521 -1
522 -)))|=(% style="width: 78px;" %)(((
523 -1
524 -)))|=(% style="width: 91px;" %)(((
525 -1
526 -)))|=(% style="width: 91px;" %)(((
527 -1
528 -)))
529 -|(% style="width:102px" %)(((
530 -**Value**
531 -)))|(% style="width:74px" %)(((
532 -address
533 -)))|(% style="width:72px" %)(((
534 -request
535 -)))|(% style="width:47px" %)(((
536 -ACK
537 -)))|(% style="width:83px" %)(((
538 -(((
179 +(% style="color:#4f81bd" %)**Payload:**
180 +
181 +(% border="1" style="background-color:#f7faff; color:black; width:938px" %)
182 +|=(% style="width: 123px;" %)**Size (bytes)**|=(% style="width: 107px;" %)1|=(% style="width: 107px;" %)1|=(% style="width: 107px;" %)1|=(% style="width: 107px;" %)1|=(% style="width: 107px;" %)1|=(% style="width: 107px;" %)1|=(% style="width: 107px;" %)1|=(% style="width: 107px;" %)1|=(% style="width: 107px;" %)1
183 +|(% style="width:123px" %)**Value**|(% style="width:38px" %)address|(% style="width:70px" %)request|(% style="width:52px" %)ACK|(% style="width:127px" %)(((
539 539  DI1&
185 +
540 540  DI1 level
541 -)))
542 -)))|(% style="width:90px" %)(((
543 -DI1TODO1
544 -)))|(% style="width:92px" %)(((
545 -DI1TORO1
546 -)))|(% style="width:78px" %)(((
547 -(((
187 +)))|(% style="width:101px" %)DI1TODO1|(% style="width:91px" %)DI1TORO1|(% style="width:111px" %)(((
548 548  DI2&
549 -DI2 leve
550 -)))
551 -)))|(% style="width:91px" %)(((
552 -DI2TODO2
553 -)))|(% style="width:91px" %)(((
554 -DI2TORO2
555 -)))
556 556  
557 -(((
190 +DI2 level
191 +)))|(% style="width:105px" %)DI2TODO2|(% style="width:106px" %)DI2TORO2
192 +
558 558  (% style="color:#037691" %)**The first byte**(%%)**:**  00 is the broadcast address, 01-08 is the RX group number.
559 -)))
560 560  
561 -(((
562 562  (% style="color:#037691" %)**The second byte**(%%)**:**  send mapping request when not 0, not request when it is 0.
563 -)))
564 564  
565 -(((
566 566  (% style="color:#037691" %)**The third byte**(%%)**:**  ACK returned to the sender after the mapping is completed.
567 -)))
568 568  
569 569  (((
570 -(((
571 571  (% style="color:#037691" %)**The fourth byte**(%%)**:**  the high four bits are 1 to represent DI1, and the low four bits are the level of DI1 when the interrupt is triggered.
572 572  )))
573 -)))
574 574  
575 -(((
576 576  (% style="color:#037691" %)**The Fifth byte**(%%)**:       **DI1TODO1 when the interrupt is triggered, 0 when the interrupt is not triggered.
577 -)))
578 578  
579 -(((
580 580  (% style="color:#037691" %)**The Sixth byte**(%%)**:**  0 does not trigger interrupt when DI1TORO1 interrupt is triggered.
581 -)))
582 582  
583 583  (((
584 -(((
585 585  (% style="color:#037691" %)**The seventh byte**(%%)**:**  the high four bits are 2 to represent DI2, and the low four bits are the level of DI2 when the interrupt is triggered.
586 586  )))
587 -)))
588 588  
589 -(((
590 590  (% style="color:#037691" %)**The 8th byte**(%%)**:          **DI2TODO2 when the interrupt is triggered, 0 when the interrupt is not triggered.
591 -)))
592 592  
593 -(((
594 594  (% style="color:#037691" %)**The 9th byte**(%%)**:**  DI2TORO2 when an interrupt is triggered, 0 when an interrupt is not triggered.
595 -)))
596 596  
597 -(((
598 598  
599 -
600 -(% style="color:blue" %)**Payload:（Since firmware 1.3）The receiver replies to the sent packet**
601 -)))
602 -
603 -(% border="1" style="background-color:#f7faff; color:black; width:822px" %)
604 -|=(% style="width: 97px;" %)(((
605 -**Size(bytes)**
606 -)))|=(% style="width: 71px;" %)(((
607 -1
608 -)))|=(% style="width: 70px;" %)(((
609 -1
610 -)))|=(% style="width: 48px;" %)(((
611 -1
612 -)))|=(% style="width: 85px;" %)(((
613 -1
614 -)))|=(% style="width: 90px;" %)(((
615 -1
616 -)))|=(% style="width: 88px;" %)(((
617 -1
618 -)))|=(% style="width: 86px;" %)(((
619 -1
620 -)))|=(% style="width: 92px;" %)(((
621 -1
622 -)))|=(% style="width: 92px;" %)(((
623 -1
624 -)))
625 -|(% style="width:97px" %)(((
626 -**Value**
627 -)))|(% style="width:71px" %)(((
628 -address
629 -)))|(% style="width:70px" %)(((
630 -request
631 -)))|(% style="width:48px" %)(((
632 -ACK
633 -)))|(% style="width:85px" %)(((
634 -(((
635 -DOI1&
636 -DOI2 level
637 -)))
638 -)))|(% style="width:90px" %)(((
639 -DI1TODO1
640 -)))|(% style="width:88px" %)(((
641 -DI1TORO1
642 -)))|(% style="width:86px" %)(((
643 -(((
644 -RO2&
645 -RO2 level
646 -)))
647 -)))|(% style="width:92px" %)(((
648 -DI2TODO2
649 -)))|(% style="width:92px" %)(((
650 -DI2TORO2
651 -)))
652 -
653 -(((
654 -(% style="color:#037691" %)**The first byte**(%%)**:**  00 is the broadcast address, 01-08 is the RX group number.
655 -)))
656 -
657 -(((
658 -(% style="color:#037691" %)**The second byte**(%%)**:**  send mapping request when not 0, not request when it is 0.
659 -)))
660 -
661 -(((
662 -(% style="color:#037691" %)**The third byte**(%%)**:**  ACK returned to the sender after the mapping is completed.
663 -)))
664 -
665 -(((
666 -(((
667 -(% style="color:#037691" %)**The fourth byte**(%%)**:**  the high four bits are 1 to represent DOI1, and the low four bits are the level of DOI2 when the interrupt is triggered.
668 -)))
669 -)))
670 -
671 -(((
672 -(% style="color:#037691" %)**The Fifth byte**(%%)**:       **DI1TODO1 when the interrupt is triggered, 0 when the interrupt is not triggered.
673 -)))
674 -
675 -(((
676 -(% style="color:#037691" %)**The Sixth byte**(%%)**:**  0 does not trigger interrupt when DI1TORO1 interrupt is triggered.
677 -)))
678 -
679 -(((
680 -(((
681 -(% style="color:#037691" %)**The seventh byte**(%%)**:**  the high four bits are 2 to represent RO2, and the low four bits are the level of RO2 when the interrupt is triggered.
682 -)))
683 -)))
684 -
685 -(((
686 -(% style="color:#037691" %)**The 8th byte**(%%)**:          **DI2TODO2 when the interrupt is triggered, 0 when the interrupt is not triggered.
687 -)))
688 -
689 -(((
690 -(% style="color:#037691" %)**The 9th byte**(%%)**:**  DI2TORO2 when an interrupt is triggered, 0 when an interrupt is not triggered.
691 -)))
692 -
693 -
1654152390874-192.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -287.9 KB
Content
image-20220602144747-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -36.9 KB
Content
image-20220602144747-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -21.9 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0