Changes for page Point to Point Communication of LT-22222-L
Last modified by Edwin Chen on 2022/11/22 09:38
Summary
-
Page properties (1 modified, 0 added, 0 removed)
Details
- Page properties
-
- Content
-
... ... @@ -38,6 +38,7 @@ 38 38 |AT+DI2TODO2=2 |AT+DI2TODO2=2 39 39 |AT+DI2TORO2=2|AT+DI2TORO2=2 40 40 41 + 41 41 == **2.2 Point To Mult-Point ** == 42 42 43 43 ... ... @@ -76,7 +76,7 @@ 76 76 77 77 (% style="color:#037691" %)**AT+RXSF **(%%)**:** Get or Set the spreading factor of RX (7 to 12) (default:12) 78 78 79 -(% style="color:#037691" %)**AT+BW **(%%)**: 80 +(% style="color:#037691" %)**AT+BW **(%%)**: **Get or Set the bandwidth [0:125khz,1:250khz,2:500khz] (default:0) 80 80 81 81 (% style="color:#037691" %)**AT+CR **(%%)**: **Get or Set the coding rate [1: 4/5, 2: 4/6, 3: 4/7, 4: 4/8] (default:1) 82 82 ... ... @@ -84,13 +84,11 @@ 84 84 85 85 (% style="color:#037691" %)**AT+VER **(%%)**:** Get firmware version number 86 86 87 -(% style="color:#037691" %)**AT+SEND **(%%)**: 88 +(% style="color:#037691" %)**AT+SEND **(%%)**: **Set Custom sent hex data 88 88 89 89 (% style="color:#037691" %)**AT+GROUPMOD **(%%)**: **Set or Get the grouping mode of the device (default: 0) 90 90 91 -((( 92 92 (% style="color:#037691" %)**AT+GROUPID **(%%)**: **Set or Get the password for matching between TX group and RX group, which can be composed of numbers or characters (default: 12345678) 93 -))) 94 94 95 95 (% style="color:#037691" %)**AT+TRIG1 **(%%)**:** Set or Get the DI1 pin interrupt trigger mode (default 0,0) 96 96 ... ... @@ -160,9 +160,7 @@ 160 160 161 161 **AT+GROUPMOD=0,aa** Set the TX group that controls the number of aa (The maximum value of aa is 8) 162 162 163 -((( 164 164 **AT+GROUPMOD=1,bb** Set to the RX group controlled by the TX group, numbered bb(The maximum value of aa is 8) 165 -))) 166 166 167 167 **AT+GROUPMOD=0,2** Set to control the TX group of the two RX groups 168 168 ... ... @@ -196,17 +196,13 @@ 196 196 197 197 (% style="color:#037691" %)**The third byte**(%%)**:** ACK returned to the sender after the mapping is completed. 198 198 199 -((( 200 200 (% style="color:#037691" %)**The fourth byte**(%%)**:** the high four bits are 1 to represent DI1, and the low four bits are the level of DI1 when the interrupt is triggered. 201 -))) 202 202 203 203 (% style="color:#037691" %)**The Fifth byte**(%%)**: **DI1TODO1 when the interrupt is triggered, 0 when the interrupt is not triggered. 204 204 205 205 (% style="color:#037691" %)**The Sixth byte**(%%)**:** 0 does not trigger interrupt when DI1TORO1 interrupt is triggered. 206 206 207 -((( 208 208 (% style="color:#037691" %)**The seventh byte**(%%)**:** the high four bits are 2 to represent DI2, and the low four bits are the level of DI2 when the interrupt is triggered. 209 -))) 210 210 211 211 (% style="color:#037691" %)**The 8th byte**(%%)**: **DI2TODO2 when the interrupt is triggered, 0 when the interrupt is not triggered. 212 212