Last modified by Mengting Qiu on 2025/03/06 13:42
<
From version < 36.1 >
edited by Mengting Qiu
on 2025/02/07 11:41
To version < 21.1 >
edited by Bei Jinggeng
on 2024/05/28 17:51
>
Change comment: Uploaded new attachment "image-20240528175154-20.png", version {1}

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.ting
1 +XWiki.Bei
Content
... ... @@ -1,147 +1,116 @@
1 -**Table of Contents: **
1 +**Table of Contents:**
2 2  
3 3  {{toc/}}
4 4  
5 5  
6 6  
7 += 1. Log in to the platform and find IOT core =
7 7  
8 -
9 -
10 -
11 -
12 -
13 -
14 -= 1. Log in to the platform and find IoT core =
15 -
16 -
17 17  = 2. Create your own test policy =
18 18  
19 -== 2.1 First click the policy on the left, enter the page and click Create policy ==
11 +1. First click the policy on the left, enter the page and click Create policy
20 20  
13 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image002.jpg]]
21 21  
22 -[[image:image-20240528172927-2.png||height="377" width="931"]]
15 +=== 2)  After filling in a policy name for testing, the policy will be displayed on the page. ===
23 23  
24 -
25 -== 2.2 After filling in a policy name for testing, the policy will be displayed on the page ==
26 -
27 -
28 28  a. Fill in any name
29 29  
19 +b. Configure the policy you created
30 30  
31 -b. Fill in * to Policy action and Policy resource (* stands for all)
21 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image004.jpg]]
32 32  
33 -[[image:image-20250103152135-2.png||height="777" width="1544"]]
34 -
35 -
36 36  c. After clicking to enter the policy configuration page, follow the clicking sequence below to go to the json configuration interface, and then fill in the following fields in the "statement" keyword:
37 37  
25 +{
38 38  
39 -**{
40 40   "Version": "2012-10-17",
28 +
41 41   "Statement": [
30 +
42 42   {
32 +
43 43   "Effect": "Allow",
44 - "Action": "iot:*",
45 - "Resource": "*"
34 +
35 + "Action": "",
36 +
37 + "Resource": ""
38 +
46 46   }
40 +
47 47   ]
48 -}**
49 49  
43 +}
50 50  
51 51  
52 -[[image:image-20250103151957-1.png||height="529" width="935"]]
46 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image006.jpg]]
53 53  
54 54  d. Create this policy
55 55  
56 56  
57 -= 3. Create a Things =
51 +1. Create a Things
58 58  
59 -== 3.1 Create a single Things ==
53 +1. Create a single Things
60 60  
55 +1. Select Create Things
61 61  
62 -(% style="color:blue" %)**1. Select Create Things**
57 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image008.jpg]]
63 63  
64 -[[image:image-20240528173244-5.png||height="329" width="932"]]
59 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image010.jpg]]
65 65  
66 -[[image:image-20240528173500-6.png||height="484" width="928"]]
67 67  
62 +1. Fill in the name of the control item you want to create in the thing name column.
68 68  
69 -(% style="color:blue" %)**2. Fill in the name of the control item you want to create in the thing name column**
70 -
71 71  Use the default for other parameters
72 72  
73 73  Then click Next.
74 74  
75 -[[image:image-20240528173754-7.png||height="712" width="781"]]
68 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image012.jpg]]
76 76  
77 77  
78 -(% style="color:blue" %)**3. Choose to automatically generate a new certificate**
71 +1. Choose to automatically generate a new certificate
79 79  
80 80  Then click Next
81 81  
82 -[[image:image-20240528173829-8.png||height="547" width="782"]]
75 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image014.jpg]]
83 83  
77 +1. The next step is to choose a strategy
84 84  
85 -(% style="color:blue" %)**4. The next step is to choose a strategy**
86 -
87 87  Here you can choose a policy we created in the first step
88 88  
89 -[[image:image-20240528173851-9.png||height="580" width="785"]]
81 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image016.jpg]]
90 90  
91 91  
92 -(% style="color:blue" %)**5. When you click to create things, the certificate download page will pop up**
84 +1. When you click to create things, the certificate download page will pop up.
93 93  
86 +This certificate is very important. After creating the device, you must download the certificate of the device so that our NB device can connect normally.
94 94  
95 -**This certificate is very important.** After creating the device, you must download the certificate of the device so that our NB device can connect normally.
96 -
97 97  Please download all the following certificates and put them in a folder.
98 98  
99 -[[image:image-20240528173926-10.png]]
90 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image018.jpg]]
100 100  
101 101  
102 -(% style="color:blue" %)**6. You can see the things you just created in the things**
103 103  
104 -[[image:image-20240528173951-11.png||height="381" width="1089"]]
94 +1. You can see the things you just created in the things
105 105  
96 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image020.jpg]]
106 106  
107 -= 4. Connect to AWS using Dragino-NB device =
108 108  
99 +1. Connect to AWS using Dragino-NB device
109 109  
110 -(% id="cke_bm_37736S" style="color:red; display:none" %)** **(% style="color:red" %)**Note: **(%%)In order to avoid problems with certificate writing, you need to set the serial port assistant to automatically add a newline character when sending commands, if there is no such newline character, the certificate written will be invalid.(Using the serial port assistant as an example)
101 +1. Upgrade the firmware to configure TTS firmware to set the certificate
111 111  
112 -[[image:image-20240822090554-1.png||height="501" width="656"]]
103 +1. Update method
104 +1. Firmware location
113 113  
106 +1. Configure certificate
114 114  
115 -== 4.1 For -NB /-NS model ==
116 -
117 -=== 4.1.1 Upgrade the firmware to configure TLS firmware to set the certificate ===
118 -
119 -
120 -User can change device firmware to::
121 -
122 -* Update with new features.
123 -
124 -* Fix bugs.
125 -
126 -Firmware and changelog can be downloaded from : **[[Set up TLS certificate - Dropbox>>https://www.dropbox.com/scl/fo/1ykfsesmr3702tj3kp663/AOOyH1GiVEOGR41gASuiDk0?rlkey=1q7a1b5yvjgt87d16w8tt0cum&st=vdy765ut&dl=0||data-sider-select-id="830d1b64-cb24-48b3-91e4-49da5c3f0783"]]**
127 -
128 -Methods to Update Firmware:
129 -
130 -* (Recommended way) OTA firmware update via BLE: [[**Instruction**>>url:http://wiki.dragino.com/xwiki/bin/view/Main/BLE_Firmware_Update_NB_Sensors_BC660K-GL/]].
131 -
132 -* Update through UART TTL interface : **[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART_Access_for_NB_ST_BC660K-GL/#H4.2UpdateFirmware28Assumethedevicealreadyhaveabootloader29]]**.
133 -
134 -=== 4.1.2 Configure certificate ===
135 -
136 -
137 137  After upgrade the firmware, the serial port displays as follows：
138 138  
139 -[[image:image-20240528174330-13.png||height="286" width="568"]]
110 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image022.jpg]]
140 140  
112 +1. Configure CA certificate.
141 141  
142 -==== 4.1.2.1  Configure CA certificate ====
143 -
144 -
145 145  Please input the certificate in PEM format for the user.
146 146  
147 147  Use the AT command AT+CACERT as follows:
... ... @@ -186,21 +186,19 @@
186 186  
187 187  ~-~-~-~--END CERTIFICATE~-~-~-~--}
188 188  
189 -(% style="color:red" %)**Note: Be sure to add a terminator "}" at the end of the command. Otherwise, the command will not execute successfully.**
158 +Note: Be sure to add a terminator "}" at the end of the command. Otherwise, the command will not execute successfully.
190 190  
191 -[[image:image-20240528174408-14.png]]
160 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image023.jpg]]
192 192  
193 193  
194 194  After successful execution, as shown in the following figure.
195 195  
196 -[[image:image-20240528174502-15.png]]
165 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image024.jpg]]
197 197  
198 -Display (% style="color:blue" %)**"Successfully configured CA certificate."**(%%) If the configuration is successful, otherwise it is considered configuration failure.
167 +Display "Successfully configured CA certificate." If the configuration is successful, otherwise it is considered configuration failure.
199 199  
169 +1. Configure client certificate.
200 200  
201 -==== 4.1.2.2 Configure client certificate ====
202 -
203 -
204 204  Use the AT command AT+CLICERT as follows：
205 205  
206 206  AT+CLICERT=~-~-~-~--BEGIN CERTIFICATE~-~-~-~--
... ... @@ -243,16 +243,15 @@
243 243  
244 244  ~-~-~-~--END CERTIFICATE~-~-~-~--}
245 245  
246 -(% style="color:red" %)**Note: Be sure to add a terminator "}" at the end of the command. Otherwise, the command will not execute successfully.**
213 +Note: Be sure to add a terminator "}" at the end of the command. Otherwise, the command will not execute successfully.
247 247  
248 -[[image:image-20240528174630-16.png||height="553" width="747"]]
249 249  
250 -Display (% style="color:blue" %)**"Successfully configured client certificate."**(%%) Configuration successful, otherwise configuration failed.
216 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image025.jpg]]
251 251  
218 +Display "Successfully configured client certificate." Configuration successful, otherwise configuration failed
252 252  
253 -==== 4.1.2.3 Configure client private key ====
220 +1. Configure client private key.
254 254  
255 -
256 256  Use the AT command AT+CLIKEY, as shown below
257 257  
258 258  AT+CLIKEY=~-~-~-~--BEGIN RSA PRIVATE KEY~-~-~-~--
... ... @@ -309,313 +309,67 @@
309 309  
310 310  ~-~-~-~--END RSA PRIVATE KEY~-~-~-~--}
311 311  
312 -(% style="color:red" %)**Note: Be sure to add a terminator "}" at the end of the command. Otherwise, the command will not execute successfully.**
278 +Note: Be sure to add a terminator "}" at the end of the command. Otherwise, the command will not execute successfully.
313 313  
314 -[[image:image-20240528174702-17.png]]
315 315  
316 -Display(% style="color:blue" %)** "Successfully configured client private key."**(%%) If the configuration is successful, otherwise it is considered configuration failure.
281 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image026.jpg]]
317 317  
283 +Display "Successfully configured client private key." If the configuration is successful, otherwise it is considered configuration failure
318 318  
319 -==== 4.1.2.4 Re-upgrade the firmware ====
285 +1. After the certificate configuration is completed, Re-upgrade to the firmware you originally used
320 320  
287 +1. Configure draginoNB-device
321 321  
322 -After completing the certificate configuration, Burn the [[bootloader>>https://www.dropbox.com/sh/u0uzvvnn58yrie4/AAAvvF_KRveNgmDejzp23ziLa/NB-IoT/Bootloader?dl=0&subfolder_nav_tracking=1]] firmware first, then re-burn the original working [[firmware>>https://www.dropbox.com/sh/u0uzvvnn58yrie4/AACREHllkTe0rATD4ZOqddyga/NB-IoT?dl=0]].
289 +1. Configure the data format sent by the device
323 323  
291 +AT+PRO=3,5(Data is in Json format of MQTT)
324 324  
325 -== 4.2  For -CB /-CS model ==
326 326  
327 -=== 4.2.1 Upgrade the firmware to configure TLS firmware to set the certificate ===
294 +1. Set server address
328 328  
296 +AT+SERVADDR=an5tk94sdgjat-ats.iot.us-east-1.amazonaws.com,8883
329 329  
330 -User can change device firmware to::
331 331  
332 -* Update with new features.
333 333  
334 -* Fix bugs.
300 +1. Set up private and public topics.
335 335  
336 -Firmware and changelog can be downloaded from : **[[Set up TLS certificate - Dropbox>>https://www.dropbox.com/scl/fo/mk9u5ux3cfo94ke0s67ik/ADOIOdwIQfCO2WUZt0MxXyU?rlkey=7o6uaywrebbnsvuj4r0r694x6&st=smrmjj7t&dl=0||data-sider-select-id="830d1b64-cb24-48b3-91e4-49da5c3f0783"]]**
337 -
338 -Methods to Update Firmware:
339 -
340 -* (Recommended way) OTA firmware update via BLE: [[**Instruction**>>url:http://wiki.dragino.com/xwiki/bin/view/Main/BLE_Firmware_Update_NB_Sensors_BC660K-GL/]].
341 -
342 -* Update through UART TTL interface : **[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART_Access_for_NB_ST_BC660K-GL/#H4.2UpdateFirmware28Assumethedevicealreadyhaveabootloader29]]**.
343 -
344 -=== 4.2.2 Configure certificate ===
345 -
346 -
347 -After upgrade the firmware, the serial port displays as follows：
348 -
349 -[[image:image-20240528174330-13.png||height="286" width="568"]]
350 -
351 -
352 -==== 4.2.2.1 Configure CA certificate ====
353 -
354 -(% style="color:red" %)**Note:You should select one of the certificates.Either CA1 or CA3 can be used**
355 -
356 -Please input the certificate in PEM format for the user.
357 -
358 -Use the AT command AT+CACERT as follows:
359 -
360 -AT+CACERT=~-~-~-~--BEGIN CERTIFICATE~-~-~-~--
361 -
362 -MIIDQTCCAimgAwIBAgITBmyfz5m/jAo54vB4ikPmljZbyjANBgkqhkiG9w0BAQsF
363 -
364 -ADA5MQswCQYDVQQGEwJVUzEPMA0GA1UEChMGQW1hem9uMRkwFwYDVQQDExBBbWF6
365 -
366 -b24gUm9vdCBDQSAxMB4XDTE1MDUyNjAwMDAwMFoXDTM4MDExNzAwMDAwMFowOTEL
367 -
368 -MAkGA1UEBhMCVVMxDzANBgNVBAoTBkFtYXpvbjEZMBcGA1UEAxMQQW1hem9uIFJv
369 -
370 -b3QgQ0EgMTCCASIwDQYJKoZIhvcNAQEBBQADggEPADCCAQoCggEBALJ4gHHKeNXj
371 -
372 -ca9HgFB0fW7Y14h29Jlo91ghYPl0hAEvrAIthtOgQ3pOsqTQNroBvo3bSMgHFzZM
373 -
374 -9O6II8c+6zf1tRn4SWiw3te5djgdYZ6k/oI2peVKVuRF4fn9tBb6dNqcmzU5L/qw
375 -
376 -IFAGbHrQgLKm+a/sRxmPUDgH3KKHOVj4utWp+UhnMJbulHheb4mjUcAwhmahRWa6
377 -
378 -VOujw5H5SNz/0egwLX0tdHA114gk957EWW67c4cX8jJGKLhD+rcdqsq08p8kDi1L
379 -
380 -93FcXmn/6pUCyziKrlA4b9v7LWIbxcceVOF34GfID5yHI9Y/QCB/IIDEgEw+OyQm
381 -
382 -jgSubJrIqg0CAwEAAaNCMEAwDwYDVR0TAQH/BAUwAwEB/zAOBgNVHQ8BAf8EBAMC
383 -
384 -AYYwHQYDVR0OBBYEFIQYzIU07LwMlJQuCFmcx7IQTgoIMA0GCSqGSIb3DQEBCwUA
385 -
386 -A4IBAQCY8jdaQZChGsV2USggNiMOruYou6r4lK5IpDB/G/wkjUu0yKGX9rbxenDI
387 -
388 -U5PMCCjjmCXPI6T53iHTfIUJrU6adTrCC2qJeHZERxhlbI1Bjjt/msv0tadQ1wUs
389 -
390 -N+gDS63pYaACbvXy8MWy7Vu33PqUXHeeE6V/Uq2V8viTO96LXFvKWlJbYK8U90vv
391 -
392 -o/ufQJVtMVT8QtPHRh8jrdkPSHCa2XV4cdFyQzR1bldZwgJcJmApzyMZFo6IQ6XU
393 -
394 -5MsI+yMRQ+hDKXJioaldXgjUkK642M4UwtBV8ob2xJNDd2ZhwLnoQdeXeGADbkpy
395 -
396 -rqXRfboQnoZsG4q5WTP468SQvvG5
397 -
398 -~-~-~-~--END CERTIFICATE~-~-~-~--}
399 -
400 -(% style="color:red" %)**Note: Be sure to add a terminator "}" at the end of the command. Otherwise, the command will not execute successfully.**
401 -
402 -[[image:image-20240528174408-14.png]]
403 -
404 -
405 -After successful execution, as shown in the following figure.
406 -
407 -[[image:image-20240528174502-15.png]]
408 -
409 -Display (% style="color:blue" %)**"Successfully configured CA certificate."**(%%) If the configuration is successful, otherwise it is considered configuration failure.
410 -
411 -
412 -==== 4.2.2.2 Configure client certificate ====
413 -
414 -
415 -Use the AT command AT+CLICERT as follows：
416 -
417 -AT+CLICERT=~-~-~-~--BEGIN CERTIFICATE~-~-~-~--
418 -
419 -MIIDWTCCAkGgAwIBAgIUYSpJUzfb4NTa76JJxd2th0fZA8swDQYJKoZIhvcNAQEL
420 -
421 -BQAwTTFLMEkGA1UECwxCQW1hem9uIFdlYiBTZXJ2aWNlcyBPPUFtYXpvbi5jb20g
422 -
423 -SW5jLiBMPVNlYXR0bGUgU1Q9V2FzaGluZ3RvbiBDPVVTMB4XDTI0MDUyNDA4MDI0
424 -
425 -NVoXDTQ5MTIzMTIzNTk1OVowHjEcMBoGA1UEAwwTQVdTIElvVCBDZXJ0aWZpY2F0
426 -
427 -ZTCCASIwDQYJKoZIhvcNAQEBBQADggEPADCCAQoCggEBAMTdc1GQLVBohAeCJD6n
428 -
429 -6WTFAFrygTch90a5wUr2bhlVuDxvEhEKNcmu5vOCo5agmfLWb2VCxgezgvQOBYQ8
430 -
431 -1oTqXJNdl4tS0DICfqb/ogVHWGHRao67XyhbPNBS0j/nCPTIIk6+/NBeYPOjaG+p
432 -
433 -utfXE7SGIEcc3RevkYkUJx6y+WH7MLjj1mufuXBVWIL1RrfrIRPw6auVk7dhS5rU
434 -
435 -NvYcJa7Qd6gpAh1DzPj7ZECrv7fEIIBDEsSYOy6ToWtzqGIVcIAHBDfORB0Hcm+N
436 -
437 -7wG3KDf61P4aWkLlkP5pRUaUIQdVblxginmx2K3n8t/WP7QcfITa191rjEVVBXmk
438 -
439 -ROsCAwEAAaNgMF4wHwYDVR0jBBgwFoAUs8Caohh1ZGP8kjSn3rtxJiJJ9IswHQYD
440 -
441 -VR0OBBYEFCjwGwqD7FG9UCNm3wjFQX4HixzfMAwGA1UdEwEB/wQCMAAwDgYDVR0P
442 -
443 -AQH/BAQDAgeAMA0GCSqGSIb3DQEBCwUAA4IBAQBgqI49a4PBQZYrFM63TX3EHgdd
444 -
445 -N6Pj7AytjO+SrKNMCSo/OtIvhDTxOocr1vKrux1Tw5qmrllrIXLtlGtbmln5DS6a
446 -
447 -DTCLrjwcIFIabLxpx5DPY1WSMYvL04SW7d4Y+3SxOFNRotDSiomr8eIIac0d3HE2
448 -
449 -B5b0SnWZgWbrhjNUgvwo8l8tA9DOGIr2MeQ5kPjudOOiYSR3HC0v+jviBMV6VX8M
450 -
451 -LHVH3CRshHDKBGpV1NZ1RAm9EY/oRGtSiMsyjRh6hegC0vehwVxaC4w9qG0ASkzz
452 -
453 -42OOGfNqhYnYDiKTEIkazaoAFpTKDejWBaL7W5VpthUkQOl67IyX+ohuUKTo
454 -
455 -~-~-~-~--END CERTIFICATE~-~-~-~--}
456 -
457 -(% style="color:red" %)**Note: Be sure to add a terminator "}" at the end of the command. Otherwise, the command will not execute successfully.**
458 -
459 -[[image:image-20240528174630-16.png||height="553" width="747"]]
460 -
461 -Display (% style="color:blue" %)**"Successfully configured client certificate."**(%%) Configuration successful, otherwise configuration failed.
462 -
463 -
464 -==== 4.2.2.3 Configure client private key ====
465 -
466 -
467 -Use the AT command AT+CLIKEY, as shown below
468 -
469 -AT+CLIKEY=~-~-~-~--BEGIN RSA PRIVATE KEY~-~-~-~--
470 -
471 -MIIEpAIBAAKCAQEAxN1zUZAtUGiEB4IkPqfpZMUAWvKBNyH3RrnBSvZuGVW4PG8S
472 -
473 -EQo1ya7m84KjlqCZ8tZvZULGB7OC9A4FhDzWhOpck12Xi1LQMgJ+pv+iBUdYYdFq
474 -
475 -jrtfKFs80FLSP+cI9MgiTr780F5g86Nob6m619cTtIYgRxzdF6+RiRQnHrL5Yfsw
476 -
477 -uOPWa5+5cFVYgvVGt+shE/Dpq5WTt2FLmtQ29hwlrtB3qCkCHUPM+PtkQKu/t8Qg
478 -
479 -gEMSxJg7LpOha3OoYhVwgAcEN85EHQdyb43vAbcoN/rU/hpaQuWQ/mlFRpQhB1Vu
480 -
481 -XGCKebHYrefy39Y/tBx8hNrX3WuMRVUFeaRE6wIDAQABAoIBAFhAOcjvjBDGuaEw
482 -
483 -CxV3al49HfqnSZuwg0xWSztSm2qKDcwxsnSnEhO2b1vsTW9h0YGV9Vv8gg/Dvkmv
484 -
485 -23M7XqM4+IUraJsRZbl1etdcM4KQSCOZoF4Zyv+pXuq4pf31kQNCkHaikWzLUkUG
486 -
487 -FPQxr0vA49mCYwfd/ZL3ppM/0IWmxRwloV1Gb9q8iDBUcJGSDokZnT7diUxzzOcd
488 -
489 -+UJ6xUhFq1v46Y7vO+73XROLv34JEBC0bIw2ErL6+AbzhHwb2mkuSccG9Ks37g3Z
490 -
491 -dyyjjj8hm1wvHWepuWqEssaiS3HD5zAsI0v85xS8RwNj3zLfd8o1WC666n3CO+ij
492 -
493 -VdRmR4kCgYEA+/sEFxpfaRomqcLwJebZcZH06U1RfJFfnbH2/Q6fANf8zNxwWs9A
494 -
495 -O+jyk/CLhHYRIk6VIOMQmWwEYgJ2eAHfw2Diwj4/0eqkGu+yZOS6KTCewxSV73vc
496 -
497 -SvACramJy4y6yEgDN5onwR1XqfVMfA0LzTcSupHR/xvrpf/gCsNFPxUCgYEAyAFd
498 -
499 -nMUhJFSq3pOogxA43aJSkA8YuDS3jpBkKQ6vx81APpIMabQauOxFDt488TZGP3Yy
500 -
501 -lhpa/lfFIgu2K7CgV4dUp+JtJJoZ/F+ExxUUzdqB4zxzWywAcc3RebfwP6qASwFT
502 -
503 -G3mXYci4tgNWR+k5CSsuLXDk/OT5uo5GeGAEc/8CgYEAk6V8uxDP8STKnNRFpN/E
504 -
505 -b6CHciDE64m/DgbWY2cq0fK9BUjxaLRhvfj8EqVzCrWnyoNjLHcAJfW+B7PLuPvY
506 -
507 -IoJlvE1/Vb/4UnQ7ApVnY3VCwaoRRNc9uIcz+pAJ1sRqOarAf9cLDkPkNwktvM5k
508 -
509 -KOXpSnrhIms4w/bPT18l9xUCgYBsAMDKbXEuK0JyGw5+Z/4tQQCQpnZU0rLkm3ha
510 -
511 -64FkxaORplBprEZZ4cyQ8NW78/EPSAadI/JLMp5TejuPcDvFyGCgoBcMEuNBc1tC
512 -
513 -HlIzr3FAgl5Qt3wt+FTMA9YKq0nINxjn10s2FKwaLccj4f9YwiaXh0VAg22PnlDT
514 -
515 -pBYDhQKBgQCMwyKXJ4zYiDRdvLvgKzeuKaU4KNQItHE4KORPfkecjPoENt4bKxDw
516 -
517 -2EdNFQLIoqBHL1s+/8+SzhCI31V7pkTs1AqCxDExJS7+8Z5NQFQIo/jooUo0N80E
518 -
519 -y3ZZS6OLOXXscEqhMogf1grfbabXM9OkgTIq43cPQHtMGQiFAtIJkg==
520 -
521 -~-~-~-~--END RSA PRIVATE KEY~-~-~-~--}
522 -
523 -(% style="color:red" %)**Note: Be sure to add a terminator "}" at the end of the command. Otherwise, the command will not execute successfully.**
524 -
525 -[[image:image-20240528174702-17.png]]
526 -
527 -Display(% style="color:blue" %)** "Successfully configured client private key."**(%%) If the configuration is successful, otherwise it is considered configuration failure.
528 -
529 -
530 -==== 4.2.2.4 For -CB /-CS model Certificate setting error/change certificate ====
531 -
532 -
533 -(% data-sider-select-id="7c5a8abc-e707-467b-ac02-db0a89098320" %)When you set the wrong certificate or you need to re-set another certificate.
534 -Please use the following three commands：
535 -
536 -(% style="color:blue" %)**AT+DELCLIKEY}**
537 -
538 -(% style="color:blue" %)**AT+DELCLICERT}**
539 -
540 -(% style="color:blue" %)**AT+DELCACERT}**(%%)
541 -(% style="color:blue" %)
542 -
543 -(% style="color:red" %)**Note: 1.When there is no certificate on the device, a deletion error will be displayed.
544 - 2.When the device already has a certificate, using the command to configure the certificate again will display a configuration error.**
545 -
546 -
547 -= (% data-sider-select-id="6b5deb69-539b-42e1-a7bc-a300eb1fea73" %)5. Configure draginoNB-device(%%) =
548 -
549 -== 5.1 Configure the data format sent by the device ==
550 -
551 -
552 -(% style="color:blue" %)**AT+PRO=3,5**(%%) (Data is in Json format of MQTT)
553 -
554 -
555 -== 5.2 Set server address ==
556 -
557 -
558 -(% style="color:blue" %)**AT+SERVADDR=an5tk94sdgjat-ats.iot.us-east-1.amazonaws.com,8883**
559 -
560 -
561 -== 5.3 Set up private and public topics ==
562 -
563 -
564 564  AWS does not limit topics, so you can set any topic
565 565  
566 -(% style="color:blue" %)**AT+SUBTOPIC=Any**
304 +AT+SUBTOPIC=Any
567 567  
568 -(% style="color:blue" %)**AT+PUBTOPIC=Any**
306 +AT+PUBTOPIC=Any
569 569  
570 570  
571 -== 5.4 Set the TLS mode ==
309 +1. Set the TLS mode
572 572  
311 +AT+TLSMOD=1,2
573 573  
574 -(% data-sider-select-id="cf7bb573-8375-4479-9801-df8bb7dab3ba" style="color:blue" %)**AT+TLSMOD=1,2**
313 +To use the TLS mode certificate function, users need to configure the AT+TLSMOD command
575 575  
576 -To use the TLS mode certificate function, users need to configure the (% style="color:blue" %)**AT+TLSMOD**(%%) command.
315 +AT+TLSMOD=1,0  No authentication
577 577  
578 -(% style="color:blue" %)**AT+TLSMOD=1,0** (%%) ~/~/ No authentication
317 +AT+TLSMOD=1,1  Perform server authentication
579 579  
580 -(% style="color:blue" %)**AT+TLSMOD=1,1** (%%) ~/~/ Perform server authentication
319 +AT+TLSMOD=1,2  Perform server and client authentication if requested by the remote server.（In AWS we recommend using this mode）
581 581  
582 -(% style="color:blue" %)**AT+TLSMOD=1,2** (%%) ~/~/ Perform server and client authentication if requested by the remote server.(In AWS we recommend using this mode)
583 583  
322 +1. Restart the device
584 584  
585 -(% data-sider-select-id="f443b9bc-1195-4fe2-965d-7de84f78747f" %)
586 -== 5.5 Set the MQOS ==
587 587  
325 +1. View data on AWS
588 588  
589 -(% data-sider-select-id="cf7bb573-8375-4479-9801-df8bb7dab3ba" style="color:blue; font-weight:bold" %)**AT+MQOS**(% data-sider-select-id="cf7bb573-8375-4479-9801-df8bb7dab3ba" style="color:blue" %)**=XX （Depends on your server configuration）**
327 +1. Find MQTT test client in test
590 590  
591 -Please find it in AWS's MQTT test client
592 -
593 -[[image:image-20240529164339-1.png||height="480" width="927"]]
594 -
595 -
596 -(% data-sider-select-id="fef22158-6e5e-46e4-b59e-fe457e562376" %)
597 -== 5.6 Restart the device ==
598 -
599 -
600 -= 6. View data on AWS =
601 -
602 -== 6.1 Find MQTT test client in test ==
603 -
604 -
605 605  In the fourth step, fill in the topics you subscribed to before
606 606  
607 -(% style="color:blue" %)**AT+PUBTOPIC=XXXX**
331 +AT+PUBTOPIC=XXXX
608 608  
609 609  If you forget your previous topic, you can fill in #,subscribe to all topics
610 610  
611 -[[image:image-20240528175111-18.png||height="409" width="1014"]]
335 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image028.jpg]]
612 612  
337 +1. You can see published information in Subscriptions
613 613  
614 -== 6.2 The data published information in Subscriptions ==
339 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image030.jpg]]
615 615  
616 -
617 -[[image:image-20240528175133-19.png||height="563" width="1022"]]
618 -
619 -[[image:image-20240528175154-20.png||height="752" width="1042"]]
620 -
621 -
341 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image032.jpg]]
image-20240529164339-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -116.5 KB
Content
image-20240814155410-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.kai
Size
... ... @@ -1,1 +1,0 @@
1 -77.8 KB
Content
image-20240822090554-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.ting
Size
... ... @@ -1,1 +1,0 @@
1 -75.4 KB
Content
image-20250103151957-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -53.9 KB
Content
image-20250103152135-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -121.6 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0