Last modified by Mengting Qiu on 2025/03/06 13:42
<
From version < 29.1 >
edited by Xiaoling
on 2024/08/19 16:28
To version < 21.1 >
edited by Bei Jinggeng
on 2024/05/28 17:51
>
Change comment: Uploaded new attachment "image-20240528175154-20.png", version {1}

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Bei
Content
... ... @@ -1,155 +1,116 @@
1 -**Table of Contents: **
1 +**Table of Contents:**
2 2  
3 3  {{toc/}}
4 4  
5 5  
6 6  
7 += 1. Log in to the platform and find IOT core =
7 7  
8 -
9 -
10 -
11 -
12 -
13 -
14 -= 1. Log in to the platform and find IoT core =
15 -
16 -
17 17  = 2. Create your own test policy =
18 18  
19 -== 2.1 First click the policy on the left, enter the page and click Create policy ==
11 +1. First click the policy on the left, enter the page and click Create policy
20 20  
13 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image002.jpg]]
21 21  
22 -[[image:image-20240528172927-2.png||height="377" width="931"]]
15 +=== 2)  After filling in a policy name for testing, the policy will be displayed on the page. ===
23 23  
24 -
25 -== 2.2 After filling in a policy name for testing, the policy will be displayed on the page ==
26 -
27 -
28 28  a. Fill in any name
29 29  
30 30  b. Configure the policy you created
31 31  
32 -[[image:image-20240528173144-3.png||height="572" width="931"]]
21 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image004.jpg]]
33 33  
34 -
35 35  c. After clicking to enter the policy configuration page, follow the clicking sequence below to go to the json configuration interface, and then fill in the following fields in the "statement" keyword:
36 36  
25 +{
37 37  
38 -**{**
27 + "Version": "2012-10-17",
39 39  
40 -**~ "Version": "2012-10-17",**
29 + "Statement": [
41 41  
42 -**~ "Statement": [**
31 + {
43 43  
44 -**~ {**
33 + "Effect": "Allow",
45 45  
46 -**~ "Effect": "Allow",**
35 + "Action": "",
47 47  
48 -**~ "Action": "",**
37 + "Resource": ""
49 49  
50 -**~ "Resource": ""**
39 + }
51 51  
52 -**~ }**
41 + ]
53 53  
54 -**~ ]**
43 +}
55 55  
56 -**}**
57 57  
46 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image006.jpg]]
58 58  
59 -[[image:image-20240528173203-4.png||height="517" width="942"]]
60 -
61 -
62 62  d. Create this policy
63 63  
64 64  
65 -= 3. Create a Things =
51 +1. Create a Things
66 66  
67 -== 3.1 Create a single Things ==
53 +1. Create a single Things
68 68  
55 +1. Select Create Things
69 69  
70 -(% style="color:blue" %)**1. Select Create Things**
57 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image008.jpg]]
71 71  
72 -[[image:image-20240528173244-5.png||height="329" width="932"]]
59 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image010.jpg]]
73 73  
74 -[[image:image-20240528173500-6.png||height="484" width="928"]]
75 75  
62 +1. Fill in the name of the control item you want to create in the thing name column.
76 76  
77 -(% style="color:blue" %)**2. Fill in the name of the control item you want to create in the thing name column**
78 -
79 79  Use the default for other parameters
80 80  
81 81  Then click Next.
82 82  
83 -[[image:image-20240528173754-7.png||height="712" width="781"]]
68 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image012.jpg]]
84 84  
85 85  
86 -(% style="color:blue" %)**3. Choose to automatically generate a new certificate**
71 +1. Choose to automatically generate a new certificate
87 87  
88 88  Then click Next
89 89  
90 -[[image:image-20240528173829-8.png||height="547" width="782"]]
75 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image014.jpg]]
91 91  
77 +1. The next step is to choose a strategy
92 92  
93 -(% style="color:blue" %)**4. The next step is to choose a strategy**
94 -
95 95  Here you can choose a policy we created in the first step
96 96  
97 -[[image:image-20240528173851-9.png||height="580" width="785"]]
81 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image016.jpg]]
98 98  
99 99  
100 -(% style="color:blue" %)**5. When you click to create things, the certificate download page will pop up**
84 +1. When you click to create things, the certificate download page will pop up.
101 101  
86 +This certificate is very important. After creating the device, you must download the certificate of the device so that our NB device can connect normally.
102 102  
103 -**This certificate is very important.** After creating the device, you must download the certificate of the device so that our NB device can connect normally.
104 -
105 105  Please download all the following certificates and put them in a folder.
106 106  
107 -[[image:image-20240528173926-10.png]]
90 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image018.jpg]]
108 108  
109 109  
110 -(% style="color:blue" %)**6. You can see the things you just created in the things**
111 111  
112 -[[image:image-20240528173951-11.png||height="381" width="1089"]]
94 +1. You can see the things you just created in the things
113 113  
96 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image020.jpg]]
114 114  
115 -= 4. Connect to AWS using Dragino-NB device =
116 116  
99 +1. Connect to AWS using Dragino-NB device
117 117  
118 -(% id="cke_bm_37736S" style="color:red; display:none" %)** **(% style="color:red" %)**Note: **(%%)In order to avoid problems with certificate writing, you need to set the serial port assistant to automatically add a newline character when sending commands, if there is no such newline character, the certificate written will be invalid.(Using the serial port assistant as an example)
101 +1. Upgrade the firmware to configure TTS firmware to set the certificate
119 119  
120 -[[image:image-20240814155410-1.png||height="328" width="563"]]
103 +1. Update method
104 +1. Firmware location
121 121  
106 +1. Configure certificate
122 122  
123 -== 4.1 For -NB /-NS model ==
124 -
125 -=== 4.1.1 Upgrade the firmware to configure TTS firmware to set the certificate ===
126 -
127 -
128 -User can change device firmware to::
129 -
130 -* Update with new features.
131 -
132 -* Fix bugs.
133 -
134 -Firmware and changelog can be downloaded from : **[[Set up TLS certificate - Dropbox>>https://www.dropbox.com/scl/fo/1ykfsesmr3702tj3kp663/AOOyH1GiVEOGR41gASuiDk0?rlkey=1q7a1b5yvjgt87d16w8tt0cum&st=vdy765ut&dl=0||data-sider-select-id="830d1b64-cb24-48b3-91e4-49da5c3f0783"]]**
135 -
136 -Methods to Update Firmware:
137 -
138 -* (Recommended way) OTA firmware update via BLE: [[**Instruction**>>url:http://wiki.dragino.com/xwiki/bin/view/Main/BLE_Firmware_Update_NB_Sensors_BC660K-GL/]].
139 -
140 -* Update through UART TTL interface : **[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART_Access_for_NB_ST_BC660K-GL/#H4.2UpdateFirmware28Assumethedevicealreadyhaveabootloader29]]**.
141 -
142 -=== 4.1.2 Configure certificate ===
143 -
144 -
145 145  After upgrade the firmware, the serial port displays as follows：
146 146  
147 -[[image:image-20240528174330-13.png||height="286" width="568"]]
110 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image022.jpg]]
148 148  
112 +1. Configure CA certificate.
149 149  
150 -==== 4.1.2.1  Configure CA certificate ====
151 -
152 -
153 153  Please input the certificate in PEM format for the user.
154 154  
155 155  Use the AT command AT+CACERT as follows:
... ... @@ -194,21 +194,19 @@
194 194  
195 195  ~-~-~-~--END CERTIFICATE~-~-~-~--}
196 196  
197 -(% style="color:red" %)**Note: Be sure to add a terminator "}" at the end of the command. Otherwise, the command will not execute successfully.**
158 +Note: Be sure to add a terminator "}" at the end of the command. Otherwise, the command will not execute successfully.
198 198  
199 -[[image:image-20240528174408-14.png]]
160 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image023.jpg]]
200 200  
201 201  
202 202  After successful execution, as shown in the following figure.
203 203  
204 -[[image:image-20240528174502-15.png]]
165 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image024.jpg]]
205 205  
206 -Display (% style="color:blue" %)**"Successfully configured CA certificate."**(%%) If the configuration is successful, otherwise it is considered configuration failure.
167 +Display "Successfully configured CA certificate." If the configuration is successful, otherwise it is considered configuration failure.
207 207  
169 +1. Configure client certificate.
208 208  
209 -==== 4.1.2.2 Configure client certificate ====
210 -
211 -
212 212  Use the AT command AT+CLICERT as follows：
213 213  
214 214  AT+CLICERT=~-~-~-~--BEGIN CERTIFICATE~-~-~-~--
... ... @@ -251,16 +251,15 @@
251 251  
252 252  ~-~-~-~--END CERTIFICATE~-~-~-~--}
253 253  
254 -(% style="color:red" %)**Note: Be sure to add a terminator "}" at the end of the command. Otherwise, the command will not execute successfully.**
213 +Note: Be sure to add a terminator "}" at the end of the command. Otherwise, the command will not execute successfully.
255 255  
256 -[[image:image-20240528174630-16.png||height="553" width="747"]]
257 257  
258 -Display (% style="color:blue" %)**"Successfully configured client certificate."**(%%) Configuration successful, otherwise configuration failed.
216 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image025.jpg]]
259 259  
218 +Display "Successfully configured client certificate." Configuration successful, otherwise configuration failed
260 260  
261 -==== 4.1.2.3 Configure client private key ====
220 +1. Configure client private key.
262 262  
263 -
264 264  Use the AT command AT+CLIKEY, as shown below
265 265  
266 266  AT+CLIKEY=~-~-~-~--BEGIN RSA PRIVATE KEY~-~-~-~--
... ... @@ -317,313 +317,67 @@
317 317  
318 318  ~-~-~-~--END RSA PRIVATE KEY~-~-~-~--}
319 319  
320 -(% style="color:red" %)**Note: Be sure to add a terminator "}" at the end of the command. Otherwise, the command will not execute successfully.**
278 +Note: Be sure to add a terminator "}" at the end of the command. Otherwise, the command will not execute successfully.
321 321  
322 -[[image:image-20240528174702-17.png]]
323 323  
324 -Display(% style="color:blue" %)** "Successfully configured client private key."**(%%) If the configuration is successful, otherwise it is considered configuration failure.
281 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image026.jpg]]
325 325  
283 +Display "Successfully configured client private key." If the configuration is successful, otherwise it is considered configuration failure
326 326  
327 -==== 4.1.2.4 Re-upgrade the firmware ====
285 +1. After the certificate configuration is completed, Re-upgrade to the firmware you originally used
328 328  
287 +1. Configure draginoNB-device
329 329  
330 -After the certificate configuration is completed, Re-upgrade to the firmware you originally used.
289 +1. Configure the data format sent by the device
331 331  
291 +AT+PRO=3,5(Data is in Json format of MQTT)
332 332  
333 -== 4.2  For -CB /-CS model ==
334 334  
335 -=== 4.2.1 Upgrade the firmware to configure TTS firmware to set the certificate ===
294 +1. Set server address
336 336  
296 +AT+SERVADDR=an5tk94sdgjat-ats.iot.us-east-1.amazonaws.com,8883
337 337  
338 -User can change device firmware to::
339 339  
340 -* Update with new features.
341 341  
342 -* Fix bugs.
300 +1. Set up private and public topics.
343 343  
344 -Firmware and changelog can be downloaded from : **[[Set up TLS certificate - Dropbox>>https://www.dropbox.com/scl/fo/mk9u5ux3cfo94ke0s67ik/ADOIOdwIQfCO2WUZt0MxXyU?rlkey=7o6uaywrebbnsvuj4r0r694x6&st=smrmjj7t&dl=0||data-sider-select-id="830d1b64-cb24-48b3-91e4-49da5c3f0783"]]**
345 -
346 -Methods to Update Firmware:
347 -
348 -* (Recommended way) OTA firmware update via BLE: [[**Instruction**>>url:http://wiki.dragino.com/xwiki/bin/view/Main/BLE_Firmware_Update_NB_Sensors_BC660K-GL/]].
349 -
350 -* Update through UART TTL interface : **[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART_Access_for_NB_ST_BC660K-GL/#H4.2UpdateFirmware28Assumethedevicealreadyhaveabootloader29]]**.
351 -
352 -=== 4.2.2 Configure certificate ===
353 -
354 -
355 -After upgrade the firmware, the serial port displays as follows：
356 -
357 -[[image:image-20240528174330-13.png||height="286" width="568"]]
358 -
359 -
360 -==== 4.2.2.1 Configure CA certificate ====
361 -
362 -(% style="color:red" %)**Note:You should select one of the certificates.Either CA1 or CA3 can be used**
363 -
364 -Please input the certificate in PEM format for the user.
365 -
366 -Use the AT command AT+CACERT as follows:
367 -
368 -AT+CACERT=~-~-~-~--BEGIN CERTIFICATE~-~-~-~--
369 -
370 -MIIDQTCCAimgAwIBAgITBmyfz5m/jAo54vB4ikPmljZbyjANBgkqhkiG9w0BAQsF
371 -
372 -ADA5MQswCQYDVQQGEwJVUzEPMA0GA1UEChMGQW1hem9uMRkwFwYDVQQDExBBbWF6
373 -
374 -b24gUm9vdCBDQSAxMB4XDTE1MDUyNjAwMDAwMFoXDTM4MDExNzAwMDAwMFowOTEL
375 -
376 -MAkGA1UEBhMCVVMxDzANBgNVBAoTBkFtYXpvbjEZMBcGA1UEAxMQQW1hem9uIFJv
377 -
378 -b3QgQ0EgMTCCASIwDQYJKoZIhvcNAQEBBQADggEPADCCAQoCggEBALJ4gHHKeNXj
379 -
380 -ca9HgFB0fW7Y14h29Jlo91ghYPl0hAEvrAIthtOgQ3pOsqTQNroBvo3bSMgHFzZM
381 -
382 -9O6II8c+6zf1tRn4SWiw3te5djgdYZ6k/oI2peVKVuRF4fn9tBb6dNqcmzU5L/qw
383 -
384 -IFAGbHrQgLKm+a/sRxmPUDgH3KKHOVj4utWp+UhnMJbulHheb4mjUcAwhmahRWa6
385 -
386 -VOujw5H5SNz/0egwLX0tdHA114gk957EWW67c4cX8jJGKLhD+rcdqsq08p8kDi1L
387 -
388 -93FcXmn/6pUCyziKrlA4b9v7LWIbxcceVOF34GfID5yHI9Y/QCB/IIDEgEw+OyQm
389 -
390 -jgSubJrIqg0CAwEAAaNCMEAwDwYDVR0TAQH/BAUwAwEB/zAOBgNVHQ8BAf8EBAMC
391 -
392 -AYYwHQYDVR0OBBYEFIQYzIU07LwMlJQuCFmcx7IQTgoIMA0GCSqGSIb3DQEBCwUA
393 -
394 -A4IBAQCY8jdaQZChGsV2USggNiMOruYou6r4lK5IpDB/G/wkjUu0yKGX9rbxenDI
395 -
396 -U5PMCCjjmCXPI6T53iHTfIUJrU6adTrCC2qJeHZERxhlbI1Bjjt/msv0tadQ1wUs
397 -
398 -N+gDS63pYaACbvXy8MWy7Vu33PqUXHeeE6V/Uq2V8viTO96LXFvKWlJbYK8U90vv
399 -
400 -o/ufQJVtMVT8QtPHRh8jrdkPSHCa2XV4cdFyQzR1bldZwgJcJmApzyMZFo6IQ6XU
401 -
402 -5MsI+yMRQ+hDKXJioaldXgjUkK642M4UwtBV8ob2xJNDd2ZhwLnoQdeXeGADbkpy
403 -
404 -rqXRfboQnoZsG4q5WTP468SQvvG5
405 -
406 -~-~-~-~--END CERTIFICATE~-~-~-~--}
407 -
408 -(% style="color:red" %)**Note: Be sure to add a terminator "}" at the end of the command. Otherwise, the command will not execute successfully.**
409 -
410 -[[image:image-20240528174408-14.png]]
411 -
412 -
413 -After successful execution, as shown in the following figure.
414 -
415 -[[image:image-20240528174502-15.png]]
416 -
417 -Display (% style="color:blue" %)**"Successfully configured CA certificate."**(%%) If the configuration is successful, otherwise it is considered configuration failure.
418 -
419 -
420 -==== 4.2.2.2 Configure client certificate ====
421 -
422 -
423 -Use the AT command AT+CLICERT as follows：
424 -
425 -AT+CLICERT=~-~-~-~--BEGIN CERTIFICATE~-~-~-~--
426 -
427 -MIIDWTCCAkGgAwIBAgIUYSpJUzfb4NTa76JJxd2th0fZA8swDQYJKoZIhvcNAQEL
428 -
429 -BQAwTTFLMEkGA1UECwxCQW1hem9uIFdlYiBTZXJ2aWNlcyBPPUFtYXpvbi5jb20g
430 -
431 -SW5jLiBMPVNlYXR0bGUgU1Q9V2FzaGluZ3RvbiBDPVVTMB4XDTI0MDUyNDA4MDI0
432 -
433 -NVoXDTQ5MTIzMTIzNTk1OVowHjEcMBoGA1UEAwwTQVdTIElvVCBDZXJ0aWZpY2F0
434 -
435 -ZTCCASIwDQYJKoZIhvcNAQEBBQADggEPADCCAQoCggEBAMTdc1GQLVBohAeCJD6n
436 -
437 -6WTFAFrygTch90a5wUr2bhlVuDxvEhEKNcmu5vOCo5agmfLWb2VCxgezgvQOBYQ8
438 -
439 -1oTqXJNdl4tS0DICfqb/ogVHWGHRao67XyhbPNBS0j/nCPTIIk6+/NBeYPOjaG+p
440 -
441 -utfXE7SGIEcc3RevkYkUJx6y+WH7MLjj1mufuXBVWIL1RrfrIRPw6auVk7dhS5rU
442 -
443 -NvYcJa7Qd6gpAh1DzPj7ZECrv7fEIIBDEsSYOy6ToWtzqGIVcIAHBDfORB0Hcm+N
444 -
445 -7wG3KDf61P4aWkLlkP5pRUaUIQdVblxginmx2K3n8t/WP7QcfITa191rjEVVBXmk
446 -
447 -ROsCAwEAAaNgMF4wHwYDVR0jBBgwFoAUs8Caohh1ZGP8kjSn3rtxJiJJ9IswHQYD
448 -
449 -VR0OBBYEFCjwGwqD7FG9UCNm3wjFQX4HixzfMAwGA1UdEwEB/wQCMAAwDgYDVR0P
450 -
451 -AQH/BAQDAgeAMA0GCSqGSIb3DQEBCwUAA4IBAQBgqI49a4PBQZYrFM63TX3EHgdd
452 -
453 -N6Pj7AytjO+SrKNMCSo/OtIvhDTxOocr1vKrux1Tw5qmrllrIXLtlGtbmln5DS6a
454 -
455 -DTCLrjwcIFIabLxpx5DPY1WSMYvL04SW7d4Y+3SxOFNRotDSiomr8eIIac0d3HE2
456 -
457 -B5b0SnWZgWbrhjNUgvwo8l8tA9DOGIr2MeQ5kPjudOOiYSR3HC0v+jviBMV6VX8M
458 -
459 -LHVH3CRshHDKBGpV1NZ1RAm9EY/oRGtSiMsyjRh6hegC0vehwVxaC4w9qG0ASkzz
460 -
461 -42OOGfNqhYnYDiKTEIkazaoAFpTKDejWBaL7W5VpthUkQOl67IyX+ohuUKTo
462 -
463 -~-~-~-~--END CERTIFICATE~-~-~-~--}
464 -
465 -(% style="color:red" %)**Note: Be sure to add a terminator "}" at the end of the command. Otherwise, the command will not execute successfully.**
466 -
467 -[[image:image-20240528174630-16.png||height="553" width="747"]]
468 -
469 -Display (% style="color:blue" %)**"Successfully configured client certificate."**(%%) Configuration successful, otherwise configuration failed.
470 -
471 -
472 -==== 4.2.2.3 Configure client private key ====
473 -
474 -
475 -Use the AT command AT+CLIKEY, as shown below
476 -
477 -AT+CLIKEY=~-~-~-~--BEGIN RSA PRIVATE KEY~-~-~-~--
478 -
479 -MIIEpAIBAAKCAQEAxN1zUZAtUGiEB4IkPqfpZMUAWvKBNyH3RrnBSvZuGVW4PG8S
480 -
481 -EQo1ya7m84KjlqCZ8tZvZULGB7OC9A4FhDzWhOpck12Xi1LQMgJ+pv+iBUdYYdFq
482 -
483 -jrtfKFs80FLSP+cI9MgiTr780F5g86Nob6m619cTtIYgRxzdF6+RiRQnHrL5Yfsw
484 -
485 -uOPWa5+5cFVYgvVGt+shE/Dpq5WTt2FLmtQ29hwlrtB3qCkCHUPM+PtkQKu/t8Qg
486 -
487 -gEMSxJg7LpOha3OoYhVwgAcEN85EHQdyb43vAbcoN/rU/hpaQuWQ/mlFRpQhB1Vu
488 -
489 -XGCKebHYrefy39Y/tBx8hNrX3WuMRVUFeaRE6wIDAQABAoIBAFhAOcjvjBDGuaEw
490 -
491 -CxV3al49HfqnSZuwg0xWSztSm2qKDcwxsnSnEhO2b1vsTW9h0YGV9Vv8gg/Dvkmv
492 -
493 -23M7XqM4+IUraJsRZbl1etdcM4KQSCOZoF4Zyv+pXuq4pf31kQNCkHaikWzLUkUG
494 -
495 -FPQxr0vA49mCYwfd/ZL3ppM/0IWmxRwloV1Gb9q8iDBUcJGSDokZnT7diUxzzOcd
496 -
497 -+UJ6xUhFq1v46Y7vO+73XROLv34JEBC0bIw2ErL6+AbzhHwb2mkuSccG9Ks37g3Z
498 -
499 -dyyjjj8hm1wvHWepuWqEssaiS3HD5zAsI0v85xS8RwNj3zLfd8o1WC666n3CO+ij
500 -
501 -VdRmR4kCgYEA+/sEFxpfaRomqcLwJebZcZH06U1RfJFfnbH2/Q6fANf8zNxwWs9A
502 -
503 -O+jyk/CLhHYRIk6VIOMQmWwEYgJ2eAHfw2Diwj4/0eqkGu+yZOS6KTCewxSV73vc
504 -
505 -SvACramJy4y6yEgDN5onwR1XqfVMfA0LzTcSupHR/xvrpf/gCsNFPxUCgYEAyAFd
506 -
507 -nMUhJFSq3pOogxA43aJSkA8YuDS3jpBkKQ6vx81APpIMabQauOxFDt488TZGP3Yy
508 -
509 -lhpa/lfFIgu2K7CgV4dUp+JtJJoZ/F+ExxUUzdqB4zxzWywAcc3RebfwP6qASwFT
510 -
511 -G3mXYci4tgNWR+k5CSsuLXDk/OT5uo5GeGAEc/8CgYEAk6V8uxDP8STKnNRFpN/E
512 -
513 -b6CHciDE64m/DgbWY2cq0fK9BUjxaLRhvfj8EqVzCrWnyoNjLHcAJfW+B7PLuPvY
514 -
515 -IoJlvE1/Vb/4UnQ7ApVnY3VCwaoRRNc9uIcz+pAJ1sRqOarAf9cLDkPkNwktvM5k
516 -
517 -KOXpSnrhIms4w/bPT18l9xUCgYBsAMDKbXEuK0JyGw5+Z/4tQQCQpnZU0rLkm3ha
518 -
519 -64FkxaORplBprEZZ4cyQ8NW78/EPSAadI/JLMp5TejuPcDvFyGCgoBcMEuNBc1tC
520 -
521 -HlIzr3FAgl5Qt3wt+FTMA9YKq0nINxjn10s2FKwaLccj4f9YwiaXh0VAg22PnlDT
522 -
523 -pBYDhQKBgQCMwyKXJ4zYiDRdvLvgKzeuKaU4KNQItHE4KORPfkecjPoENt4bKxDw
524 -
525 -2EdNFQLIoqBHL1s+/8+SzhCI31V7pkTs1AqCxDExJS7+8Z5NQFQIo/jooUo0N80E
526 -
527 -y3ZZS6OLOXXscEqhMogf1grfbabXM9OkgTIq43cPQHtMGQiFAtIJkg==
528 -
529 -~-~-~-~--END RSA PRIVATE KEY~-~-~-~--}
530 -
531 -(% style="color:red" %)**Note: Be sure to add a terminator "}" at the end of the command. Otherwise, the command will not execute successfully.**
532 -
533 -[[image:image-20240528174702-17.png]]
534 -
535 -Display(% style="color:blue" %)** "Successfully configured client private key."**(%%) If the configuration is successful, otherwise it is considered configuration failure.
536 -
537 -
538 -==== 4.2.2.4 For -CB /-CS model Certificate setting error/change certificate ====
539 -
540 -
541 -(% data-sider-select-id="7c5a8abc-e707-467b-ac02-db0a89098320" %)When you set the wrong certificate or you need to re-set another certificate.
542 -Please use the following three commands：
543 -
544 -(% style="color:blue" %)**AT+DELCLIKEY}**
545 -
546 -(% style="color:blue" %)**AT+DELCLICERT}**
547 -
548 -(% style="color:blue" %)**AT+DELCACERT}**(%%)
549 -(% style="color:blue" %)
550 -
551 -(% style="color:red" %)**Note: 1.When there is no certificate on the device, a deletion error will be displayed.
552 - 2.When the device already has a certificate, using the command to configure the certificate again will display a configuration error.**
553 -
554 -
555 -= (% data-sider-select-id="6b5deb69-539b-42e1-a7bc-a300eb1fea73" %)5. Configure draginoNB-device(%%) =
556 -
557 -== 5.1 Configure the data format sent by the device ==
558 -
559 -
560 -(% style="color:blue" %)**AT+PRO=3,5**(%%) (Data is in Json format of MQTT)
561 -
562 -
563 -== 5.2 Set server address ==
564 -
565 -
566 -(% style="color:blue" %)**AT+SERVADDR=an5tk94sdgjat-ats.iot.us-east-1.amazonaws.com,8883**
567 -
568 -
569 -== 5.3 Set up private and public topics ==
570 -
571 -
572 572  AWS does not limit topics, so you can set any topic
573 573  
574 -(% style="color:blue" %)**AT+SUBTOPIC=Any**
304 +AT+SUBTOPIC=Any
575 575  
576 -(% style="color:blue" %)**AT+PUBTOPIC=Any**
306 +AT+PUBTOPIC=Any
577 577  
578 578  
579 -== 5.4 Set the TLS mode ==
309 +1. Set the TLS mode
580 580  
311 +AT+TLSMOD=1,2
581 581  
582 -(% data-sider-select-id="cf7bb573-8375-4479-9801-df8bb7dab3ba" style="color:blue" %)**AT+TLSMOD=1,2**
313 +To use the TLS mode certificate function, users need to configure the AT+TLSMOD command
583 583  
584 -To use the TLS mode certificate function, users need to configure the (% style="color:blue" %)**AT+TLSMOD**(%%) command.
315 +AT+TLSMOD=1,0  No authentication
585 585  
586 -(% style="color:blue" %)**AT+TLSMOD=1,0** (%%) ~/~/ No authentication
317 +AT+TLSMOD=1,1  Perform server authentication
587 587  
588 -(% style="color:blue" %)**AT+TLSMOD=1,1** (%%) ~/~/ Perform server authentication
319 +AT+TLSMOD=1,2  Perform server and client authentication if requested by the remote server.（In AWS we recommend using this mode）
589 589  
590 -(% style="color:blue" %)**AT+TLSMOD=1,2** (%%) ~/~/ Perform server and client authentication if requested by the remote server.(In AWS we recommend using this mode)
591 591  
322 +1. Restart the device
592 592  
593 -(% data-sider-select-id="f443b9bc-1195-4fe2-965d-7de84f78747f" %)
594 -== 5.5 Set the MQOS ==
595 595  
325 +1. View data on AWS
596 596  
597 -(% data-sider-select-id="cf7bb573-8375-4479-9801-df8bb7dab3ba" style="color:blue; font-weight:bold" %)**AT+MQOS**(% data-sider-select-id="cf7bb573-8375-4479-9801-df8bb7dab3ba" style="color:blue" %)**=XX （Depends on your server configuration）**
327 +1. Find MQTT test client in test
598 598  
599 -Please find it in AWS's MQTT test client
600 -
601 -[[image:image-20240529164339-1.png||height="480" width="927"]]
602 -
603 -
604 -(% data-sider-select-id="fef22158-6e5e-46e4-b59e-fe457e562376" %)
605 -== 5.6 Restart the device ==
606 -
607 -
608 -= 6. View data on AWS =
609 -
610 -== 6.1 Find MQTT test client in test ==
611 -
612 -
613 613  In the fourth step, fill in the topics you subscribed to before
614 614  
615 -(% style="color:blue" %)**AT+PUBTOPIC=XXXX**
331 +AT+PUBTOPIC=XXXX
616 616  
617 617  If you forget your previous topic, you can fill in #,subscribe to all topics
618 618  
619 -[[image:image-20240528175111-18.png||height="409" width="1014"]]
335 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image028.jpg]]
620 620  
337 +1. You can see published information in Subscriptions
621 621  
622 -== 6.2 The data published information in Subscriptions ==
339 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image030.jpg]]
623 623  
624 -
625 -[[image:image-20240528175133-19.png||height="563" width="1022"]]
626 -
627 -[[image:image-20240528175154-20.png||height="752" width="1042"]]
628 -
629 -
341 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image032.jpg]]
image-20240529164339-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -116.5 KB
Content
image-20240814155410-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.kai
Size
... ... @@ -1,1 +1,0 @@
1 -77.8 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0