Last modified by Mengting Qiu on 2025/03/06 13:42
<
From version < 28.1 >
edited by kai
on 2024/08/14 15:57
To version < 19.1 >
edited by Bei Jinggeng
on 2024/05/28 17:51
>
Change comment: Uploaded new attachment "image-20240528175111-18.png", version {1}

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.kai
1 +XWiki.Bei
Content
... ... @@ -1,154 +1,116 @@
1 -**Table of Contents: **
1 +**Table of Contents:**
2 2  
3 3  {{toc/}}
4 4  
5 5  
6 6  
7 += 1. Log in to the platform and find IOT core =
7 7  
8 -
9 -
10 -
11 -
12 -
13 -
14 -= 1. Log in to the platform and find IoT core =
15 -
16 -
17 17  = 2. Create your own test policy =
18 18  
19 -== 2.1 First click the policy on the left, enter the page and click Create policy ==
11 +1. First click the policy on the left, enter the page and click Create policy
20 20  
13 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image002.jpg]]
21 21  
22 -[[image:image-20240528172927-2.png||height="377" width="931"]]
15 +=== 2)  After filling in a policy name for testing, the policy will be displayed on the page. ===
23 23  
24 -
25 -== 2.2 After filling in a policy name for testing, the policy will be displayed on the page ==
26 -
27 -
28 28  a. Fill in any name
29 29  
30 30  b. Configure the policy you created
31 31  
32 -[[image:image-20240528173144-3.png||height="572" width="931"]]
21 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image004.jpg]]
33 33  
34 -
35 35  c. After clicking to enter the policy configuration page, follow the clicking sequence below to go to the json configuration interface, and then fill in the following fields in the "statement" keyword:
36 36  
25 +{
37 37  
38 -**{**
27 + "Version": "2012-10-17",
39 39  
40 -**~ "Version": "2012-10-17",**
29 + "Statement": [
41 41  
42 -**~ "Statement": [**
31 + {
43 43  
44 -**~ {**
33 + "Effect": "Allow",
45 45  
46 -**~ "Effect": "Allow",**
35 + "Action": "",
47 47  
48 -**~ "Action": "",**
37 + "Resource": ""
49 49  
50 -**~ "Resource": ""**
39 + }
51 51  
52 -**~ }**
41 + ]
53 53  
54 -**~ ]**
43 +}
55 55  
56 -**}**
57 57  
46 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image006.jpg]]
58 58  
59 -[[image:image-20240528173203-4.png||height="517" width="942"]]
60 -
61 -
62 62  d. Create this policy
63 63  
64 64  
65 -= 3. Create a Things =
51 +1. Create a Things
66 66  
67 -== 3.1 Create a single Things ==
53 +1. Create a single Things
68 68  
55 +1. Select Create Things
69 69  
70 -(% style="color:blue" %)**1. Select Create Things**
57 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image008.jpg]]
71 71  
72 -[[image:image-20240528173244-5.png||height="329" width="932"]]
59 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image010.jpg]]
73 73  
74 -[[image:image-20240528173500-6.png||height="484" width="928"]]
75 75  
62 +1. Fill in the name of the control item you want to create in the thing name column.
76 76  
77 -(% style="color:blue" %)**2. Fill in the name of the control item you want to create in the thing name column**
78 -
79 79  Use the default for other parameters
80 80  
81 81  Then click Next.
82 82  
83 -[[image:image-20240528173754-7.png||height="712" width="781"]]
68 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image012.jpg]]
84 84  
85 85  
86 -(% style="color:blue" %)**3. Choose to automatically generate a new certificate**
71 +1. Choose to automatically generate a new certificate
87 87  
88 88  Then click Next
89 89  
90 -[[image:image-20240528173829-8.png||height="547" width="782"]]
75 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image014.jpg]]
91 91  
77 +1. The next step is to choose a strategy
92 92  
93 -(% style="color:blue" %)**4. The next step is to choose a strategy**
94 -
95 95  Here you can choose a policy we created in the first step
96 96  
97 -[[image:image-20240528173851-9.png||height="580" width="785"]]
81 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image016.jpg]]
98 98  
99 99  
100 -(% style="color:blue" %)**5. When you click to create things, the certificate download page will pop up**
84 +1. When you click to create things, the certificate download page will pop up.
101 101  
86 +This certificate is very important. After creating the device, you must download the certificate of the device so that our NB device can connect normally.
102 102  
103 -**This certificate is very important.** After creating the device, you must download the certificate of the device so that our NB device can connect normally.
104 -
105 105  Please download all the following certificates and put them in a folder.
106 106  
107 -[[image:image-20240528173926-10.png]]
90 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image018.jpg]]
108 108  
109 109  
110 -(% style="color:blue" %)**6. You can see the things you just created in the things**
111 111  
112 -[[image:image-20240528173951-11.png||height="381" width="1089"]]
94 +1. You can see the things you just created in the things
113 113  
96 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image020.jpg]]
114 114  
115 -= 4. Connect to AWS using Dragino-NB device =
116 116  
99 +1. Connect to AWS using Dragino-NB device
117 117  
118 -(% id="cke_bm_37736S" style="color: red; display: none" %)** **(% style="color:red" %)**Note: **(%%)In order to avoid problems with certificate writing, you need to set the serial port assistant to automatically add a newline character when sending commands, if there is no such newline character, the certificate written will be invalid.(Using the serial port assistant as an example)
101 +1. Upgrade the firmware to configure TTS firmware to set the certificate
119 119  
120 -[[image:image-20240814155410-1.png||height="328" width="563"]]
103 +1. Update method
104 +1. Firmware location
121 121  
122 -== 4.1 For -NB /-NS model ==
106 +1. Configure certificate
123 123  
124 -=== 4.1.1 Upgrade the firmware to configure TTS firmware to set the certificate ===
125 -
126 -
127 -User can change device firmware to::
128 -
129 -* Update with new features.
130 -
131 -* Fix bugs.
132 -
133 -Firmware and changelog can be downloaded from : **[[Set up TLS certificate - Dropbox>>https://www.dropbox.com/scl/fo/1ykfsesmr3702tj3kp663/AOOyH1GiVEOGR41gASuiDk0?rlkey=1q7a1b5yvjgt87d16w8tt0cum&st=vdy765ut&dl=0||data-sider-select-id="830d1b64-cb24-48b3-91e4-49da5c3f0783"]]**
134 -
135 -Methods to Update Firmware:
136 -
137 -* (Recommended way) OTA firmware update via BLE: [[**Instruction**>>url:http://wiki.dragino.com/xwiki/bin/view/Main/BLE_Firmware_Update_NB_Sensors_BC660K-GL/]].
138 -
139 -* Update through UART TTL interface : **[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART_Access_for_NB_ST_BC660K-GL/#H4.2UpdateFirmware28Assumethedevicealreadyhaveabootloader29]]**.
140 -
141 -=== 4.1.2 Configure certificate ===
142 -
143 -
144 144  After upgrade the firmware, the serial port displays as follows：
145 145  
146 -[[image:image-20240528174330-13.png||height="286" width="568"]]
110 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image022.jpg]]
147 147  
112 +1. Configure CA certificate.
148 148  
149 -==== 4.1.2.1  Configure CA certificate ====
150 -
151 -
152 152  Please input the certificate in PEM format for the user.
153 153  
154 154  Use the AT command AT+CACERT as follows:
... ... @@ -193,21 +193,19 @@
193 193  
194 194  ~-~-~-~--END CERTIFICATE~-~-~-~--}
195 195  
196 -(% style="color:red" %)**Note: Be sure to add a terminator "}" at the end of the command. Otherwise, the command will not execute successfully.**
158 +Note: Be sure to add a terminator "}" at the end of the command. Otherwise, the command will not execute successfully.
197 197  
198 -[[image:image-20240528174408-14.png]]
160 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image023.jpg]]
199 199  
200 200  
201 201  After successful execution, as shown in the following figure.
202 202  
203 -[[image:image-20240528174502-15.png]]
165 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image024.jpg]]
204 204  
205 -Display (% style="color:blue" %)**"Successfully configured CA certificate."**(%%) If the configuration is successful, otherwise it is considered configuration failure.
167 +Display "Successfully configured CA certificate." If the configuration is successful, otherwise it is considered configuration failure.
206 206  
169 +1. Configure client certificate.
207 207  
208 -==== 4.1.2.2 Configure client certificate ====
209 -
210 -
211 211  Use the AT command AT+CLICERT as follows：
212 212  
213 213  AT+CLICERT=~-~-~-~--BEGIN CERTIFICATE~-~-~-~--
... ... @@ -250,16 +250,15 @@
250 250  
251 251  ~-~-~-~--END CERTIFICATE~-~-~-~--}
252 252  
253 -(% style="color:red" %)**Note: Be sure to add a terminator "}" at the end of the command. Otherwise, the command will not execute successfully.**
213 +Note: Be sure to add a terminator "}" at the end of the command. Otherwise, the command will not execute successfully.
254 254  
255 -[[image:image-20240528174630-16.png||height="553" width="747"]]
256 256  
257 -Display (% style="color:blue" %)**"Successfully configured client certificate."**(%%) Configuration successful, otherwise configuration failed.
216 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image025.jpg]]
258 258  
218 +Display "Successfully configured client certificate." Configuration successful, otherwise configuration failed
259 259  
260 -==== 4.1.2.3 Configure client private key ====
220 +1. Configure client private key.
261 261  
262 -
263 263  Use the AT command AT+CLIKEY, as shown below
264 264  
265 265  AT+CLIKEY=~-~-~-~--BEGIN RSA PRIVATE KEY~-~-~-~--
... ... @@ -316,311 +316,67 @@
316 316  
317 317  ~-~-~-~--END RSA PRIVATE KEY~-~-~-~--}
318 318  
319 -(% style="color:red" %)**Note: Be sure to add a terminator "}" at the end of the command. Otherwise, the command will not execute successfully.**
278 +Note: Be sure to add a terminator "}" at the end of the command. Otherwise, the command will not execute successfully.
320 320  
321 -[[image:image-20240528174702-17.png]]
322 322  
323 -Display(% style="color:blue" %)** "Successfully configured client private key."**(%%) If the configuration is successful, otherwise it is considered configuration failure.
281 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image026.jpg]]
324 324  
283 +Display "Successfully configured client private key." If the configuration is successful, otherwise it is considered configuration failure
325 325  
326 -==== 4.1.2.4 Re-upgrade the firmware ====
285 +1. After the certificate configuration is completed, Re-upgrade to the firmware you originally used
327 327  
287 +1. Configure draginoNB-device
328 328  
329 -After the certificate configuration is completed, Re-upgrade to the firmware you originally used.
289 +1. Configure the data format sent by the device
330 330  
291 +AT+PRO=3,5(Data is in Json format of MQTT)
331 331  
332 -== 4.2  For -CB /-CS model ==
333 333  
334 -=== 4.2.1 Upgrade the firmware to configure TTS firmware to set the certificate ===
294 +1. Set server address
335 335  
296 +AT+SERVADDR=an5tk94sdgjat-ats.iot.us-east-1.amazonaws.com,8883
336 336  
337 -User can change device firmware to::
338 338  
339 -* Update with new features.
340 340  
341 -* Fix bugs.
300 +1. Set up private and public topics.
342 342  
343 -Firmware and changelog can be downloaded from : **[[Set up TLS certificate - Dropbox>>https://www.dropbox.com/scl/fo/mk9u5ux3cfo94ke0s67ik/ADOIOdwIQfCO2WUZt0MxXyU?rlkey=7o6uaywrebbnsvuj4r0r694x6&st=smrmjj7t&dl=0||data-sider-select-id="830d1b64-cb24-48b3-91e4-49da5c3f0783"]]**
344 -
345 -Methods to Update Firmware:
346 -
347 -* (Recommended way) OTA firmware update via BLE: [[**Instruction**>>url:http://wiki.dragino.com/xwiki/bin/view/Main/BLE_Firmware_Update_NB_Sensors_BC660K-GL/]].
348 -
349 -* Update through UART TTL interface : **[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART_Access_for_NB_ST_BC660K-GL/#H4.2UpdateFirmware28Assumethedevicealreadyhaveabootloader29]]**.
350 -
351 -=== 4.2.2 Configure certificate ===
352 -
353 -
354 -After upgrade the firmware, the serial port displays as follows：
355 -
356 -[[image:image-20240528174330-13.png||height="286" width="568"]]
357 -
358 -
359 -==== 4.2.2.1 Configure CA certificate ====
360 -
361 -(% style="color:red" %)**Note:You should select one of the certificates.Either CA1 or CA3 can be used**
362 -
363 -Please input the certificate in PEM format for the user.
364 -
365 -Use the AT command AT+CACERT as follows:
366 -
367 -AT+CACERT=~-~-~-~--BEGIN CERTIFICATE~-~-~-~--
368 -
369 -MIIDQTCCAimgAwIBAgITBmyfz5m/jAo54vB4ikPmljZbyjANBgkqhkiG9w0BAQsF
370 -
371 -ADA5MQswCQYDVQQGEwJVUzEPMA0GA1UEChMGQW1hem9uMRkwFwYDVQQDExBBbWF6
372 -
373 -b24gUm9vdCBDQSAxMB4XDTE1MDUyNjAwMDAwMFoXDTM4MDExNzAwMDAwMFowOTEL
374 -
375 -MAkGA1UEBhMCVVMxDzANBgNVBAoTBkFtYXpvbjEZMBcGA1UEAxMQQW1hem9uIFJv
376 -
377 -b3QgQ0EgMTCCASIwDQYJKoZIhvcNAQEBBQADggEPADCCAQoCggEBALJ4gHHKeNXj
378 -
379 -ca9HgFB0fW7Y14h29Jlo91ghYPl0hAEvrAIthtOgQ3pOsqTQNroBvo3bSMgHFzZM
380 -
381 -9O6II8c+6zf1tRn4SWiw3te5djgdYZ6k/oI2peVKVuRF4fn9tBb6dNqcmzU5L/qw
382 -
383 -IFAGbHrQgLKm+a/sRxmPUDgH3KKHOVj4utWp+UhnMJbulHheb4mjUcAwhmahRWa6
384 -
385 -VOujw5H5SNz/0egwLX0tdHA114gk957EWW67c4cX8jJGKLhD+rcdqsq08p8kDi1L
386 -
387 -93FcXmn/6pUCyziKrlA4b9v7LWIbxcceVOF34GfID5yHI9Y/QCB/IIDEgEw+OyQm
388 -
389 -jgSubJrIqg0CAwEAAaNCMEAwDwYDVR0TAQH/BAUwAwEB/zAOBgNVHQ8BAf8EBAMC
390 -
391 -AYYwHQYDVR0OBBYEFIQYzIU07LwMlJQuCFmcx7IQTgoIMA0GCSqGSIb3DQEBCwUA
392 -
393 -A4IBAQCY8jdaQZChGsV2USggNiMOruYou6r4lK5IpDB/G/wkjUu0yKGX9rbxenDI
394 -
395 -U5PMCCjjmCXPI6T53iHTfIUJrU6adTrCC2qJeHZERxhlbI1Bjjt/msv0tadQ1wUs
396 -
397 -N+gDS63pYaACbvXy8MWy7Vu33PqUXHeeE6V/Uq2V8viTO96LXFvKWlJbYK8U90vv
398 -
399 -o/ufQJVtMVT8QtPHRh8jrdkPSHCa2XV4cdFyQzR1bldZwgJcJmApzyMZFo6IQ6XU
400 -
401 -5MsI+yMRQ+hDKXJioaldXgjUkK642M4UwtBV8ob2xJNDd2ZhwLnoQdeXeGADbkpy
402 -
403 -rqXRfboQnoZsG4q5WTP468SQvvG5
404 -
405 -~-~-~-~--END CERTIFICATE~-~-~-~--}
406 -
407 -(% style="color:red" %)**Note: Be sure to add a terminator "}" at the end of the command. Otherwise, the command will not execute successfully.**
408 -
409 -[[image:image-20240528174408-14.png]]
410 -
411 -
412 -After successful execution, as shown in the following figure.
413 -
414 -[[image:image-20240528174502-15.png]]
415 -
416 -Display (% style="color:blue" %)**"Successfully configured CA certificate."**(%%) If the configuration is successful, otherwise it is considered configuration failure.
417 -
418 -
419 -==== 4.2.2.2 Configure client certificate ====
420 -
421 -
422 -Use the AT command AT+CLICERT as follows：
423 -
424 -AT+CLICERT=~-~-~-~--BEGIN CERTIFICATE~-~-~-~--
425 -
426 -MIIDWTCCAkGgAwIBAgIUYSpJUzfb4NTa76JJxd2th0fZA8swDQYJKoZIhvcNAQEL
427 -
428 -BQAwTTFLMEkGA1UECwxCQW1hem9uIFdlYiBTZXJ2aWNlcyBPPUFtYXpvbi5jb20g
429 -
430 -SW5jLiBMPVNlYXR0bGUgU1Q9V2FzaGluZ3RvbiBDPVVTMB4XDTI0MDUyNDA4MDI0
431 -
432 -NVoXDTQ5MTIzMTIzNTk1OVowHjEcMBoGA1UEAwwTQVdTIElvVCBDZXJ0aWZpY2F0
433 -
434 -ZTCCASIwDQYJKoZIhvcNAQEBBQADggEPADCCAQoCggEBAMTdc1GQLVBohAeCJD6n
435 -
436 -6WTFAFrygTch90a5wUr2bhlVuDxvEhEKNcmu5vOCo5agmfLWb2VCxgezgvQOBYQ8
437 -
438 -1oTqXJNdl4tS0DICfqb/ogVHWGHRao67XyhbPNBS0j/nCPTIIk6+/NBeYPOjaG+p
439 -
440 -utfXE7SGIEcc3RevkYkUJx6y+WH7MLjj1mufuXBVWIL1RrfrIRPw6auVk7dhS5rU
441 -
442 -NvYcJa7Qd6gpAh1DzPj7ZECrv7fEIIBDEsSYOy6ToWtzqGIVcIAHBDfORB0Hcm+N
443 -
444 -7wG3KDf61P4aWkLlkP5pRUaUIQdVblxginmx2K3n8t/WP7QcfITa191rjEVVBXmk
445 -
446 -ROsCAwEAAaNgMF4wHwYDVR0jBBgwFoAUs8Caohh1ZGP8kjSn3rtxJiJJ9IswHQYD
447 -
448 -VR0OBBYEFCjwGwqD7FG9UCNm3wjFQX4HixzfMAwGA1UdEwEB/wQCMAAwDgYDVR0P
449 -
450 -AQH/BAQDAgeAMA0GCSqGSIb3DQEBCwUAA4IBAQBgqI49a4PBQZYrFM63TX3EHgdd
451 -
452 -N6Pj7AytjO+SrKNMCSo/OtIvhDTxOocr1vKrux1Tw5qmrllrIXLtlGtbmln5DS6a
453 -
454 -DTCLrjwcIFIabLxpx5DPY1WSMYvL04SW7d4Y+3SxOFNRotDSiomr8eIIac0d3HE2
455 -
456 -B5b0SnWZgWbrhjNUgvwo8l8tA9DOGIr2MeQ5kPjudOOiYSR3HC0v+jviBMV6VX8M
457 -
458 -LHVH3CRshHDKBGpV1NZ1RAm9EY/oRGtSiMsyjRh6hegC0vehwVxaC4w9qG0ASkzz
459 -
460 -42OOGfNqhYnYDiKTEIkazaoAFpTKDejWBaL7W5VpthUkQOl67IyX+ohuUKTo
461 -
462 -~-~-~-~--END CERTIFICATE~-~-~-~--}
463 -
464 -(% style="color:red" %)**Note: Be sure to add a terminator "}" at the end of the command. Otherwise, the command will not execute successfully.**
465 -
466 -[[image:image-20240528174630-16.png||height="553" width="747"]]
467 -
468 -Display (% style="color:blue" %)**"Successfully configured client certificate."**(%%) Configuration successful, otherwise configuration failed.
469 -
470 -
471 -==== 4.2.2.3 Configure client private key ====
472 -
473 -
474 -Use the AT command AT+CLIKEY, as shown below
475 -
476 -AT+CLIKEY=~-~-~-~--BEGIN RSA PRIVATE KEY~-~-~-~--
477 -
478 -MIIEpAIBAAKCAQEAxN1zUZAtUGiEB4IkPqfpZMUAWvKBNyH3RrnBSvZuGVW4PG8S
479 -
480 -EQo1ya7m84KjlqCZ8tZvZULGB7OC9A4FhDzWhOpck12Xi1LQMgJ+pv+iBUdYYdFq
481 -
482 -jrtfKFs80FLSP+cI9MgiTr780F5g86Nob6m619cTtIYgRxzdF6+RiRQnHrL5Yfsw
483 -
484 -uOPWa5+5cFVYgvVGt+shE/Dpq5WTt2FLmtQ29hwlrtB3qCkCHUPM+PtkQKu/t8Qg
485 -
486 -gEMSxJg7LpOha3OoYhVwgAcEN85EHQdyb43vAbcoN/rU/hpaQuWQ/mlFRpQhB1Vu
487 -
488 -XGCKebHYrefy39Y/tBx8hNrX3WuMRVUFeaRE6wIDAQABAoIBAFhAOcjvjBDGuaEw
489 -
490 -CxV3al49HfqnSZuwg0xWSztSm2qKDcwxsnSnEhO2b1vsTW9h0YGV9Vv8gg/Dvkmv
491 -
492 -23M7XqM4+IUraJsRZbl1etdcM4KQSCOZoF4Zyv+pXuq4pf31kQNCkHaikWzLUkUG
493 -
494 -FPQxr0vA49mCYwfd/ZL3ppM/0IWmxRwloV1Gb9q8iDBUcJGSDokZnT7diUxzzOcd
495 -
496 -+UJ6xUhFq1v46Y7vO+73XROLv34JEBC0bIw2ErL6+AbzhHwb2mkuSccG9Ks37g3Z
497 -
498 -dyyjjj8hm1wvHWepuWqEssaiS3HD5zAsI0v85xS8RwNj3zLfd8o1WC666n3CO+ij
499 -
500 -VdRmR4kCgYEA+/sEFxpfaRomqcLwJebZcZH06U1RfJFfnbH2/Q6fANf8zNxwWs9A
501 -
502 -O+jyk/CLhHYRIk6VIOMQmWwEYgJ2eAHfw2Diwj4/0eqkGu+yZOS6KTCewxSV73vc
503 -
504 -SvACramJy4y6yEgDN5onwR1XqfVMfA0LzTcSupHR/xvrpf/gCsNFPxUCgYEAyAFd
505 -
506 -nMUhJFSq3pOogxA43aJSkA8YuDS3jpBkKQ6vx81APpIMabQauOxFDt488TZGP3Yy
507 -
508 -lhpa/lfFIgu2K7CgV4dUp+JtJJoZ/F+ExxUUzdqB4zxzWywAcc3RebfwP6qASwFT
509 -
510 -G3mXYci4tgNWR+k5CSsuLXDk/OT5uo5GeGAEc/8CgYEAk6V8uxDP8STKnNRFpN/E
511 -
512 -b6CHciDE64m/DgbWY2cq0fK9BUjxaLRhvfj8EqVzCrWnyoNjLHcAJfW+B7PLuPvY
513 -
514 -IoJlvE1/Vb/4UnQ7ApVnY3VCwaoRRNc9uIcz+pAJ1sRqOarAf9cLDkPkNwktvM5k
515 -
516 -KOXpSnrhIms4w/bPT18l9xUCgYBsAMDKbXEuK0JyGw5+Z/4tQQCQpnZU0rLkm3ha
517 -
518 -64FkxaORplBprEZZ4cyQ8NW78/EPSAadI/JLMp5TejuPcDvFyGCgoBcMEuNBc1tC
519 -
520 -HlIzr3FAgl5Qt3wt+FTMA9YKq0nINxjn10s2FKwaLccj4f9YwiaXh0VAg22PnlDT
521 -
522 -pBYDhQKBgQCMwyKXJ4zYiDRdvLvgKzeuKaU4KNQItHE4KORPfkecjPoENt4bKxDw
523 -
524 -2EdNFQLIoqBHL1s+/8+SzhCI31V7pkTs1AqCxDExJS7+8Z5NQFQIo/jooUo0N80E
525 -
526 -y3ZZS6OLOXXscEqhMogf1grfbabXM9OkgTIq43cPQHtMGQiFAtIJkg==
527 -
528 -~-~-~-~--END RSA PRIVATE KEY~-~-~-~--}
529 -
530 -(% style="color:red" %)**Note: Be sure to add a terminator "}" at the end of the command. Otherwise, the command will not execute successfully.**
531 -
532 -[[image:image-20240528174702-17.png]]
533 -
534 -Display(% style="color:blue" %)** "Successfully configured client private key."**(%%) If the configuration is successful, otherwise it is considered configuration failure.
535 -
536 -
537 -==== 4.2.2.4 For -CB /-CS model Certificate setting error/change certificate ====
538 -
539 -
540 -(% data-sider-select-id="7c5a8abc-e707-467b-ac02-db0a89098320" %)When you set the wrong certificate or you need to re-set another certificate.
541 -Please use the following three commands：
542 -
543 -(% style="color:blue" %)**AT+DELCLIKEY}**
544 -
545 -(% style="color:blue" %)**AT+DELCLICERT}**
546 -
547 -(% style="color:blue" %)**AT+DELCACERT}**(%%)
548 -(% style="color:blue" %)
549 -
550 -(% style="color:red" %)**Note: 1.When there is no certificate on the device, a deletion error will be displayed.
551 - 2.When the device already has a certificate, using the command to configure the certificate again will display a configuration error.**
552 -
553 -
554 -= (% data-sider-select-id="6b5deb69-539b-42e1-a7bc-a300eb1fea73" %)5. Configure draginoNB-device(%%) =
555 -
556 -== 5.1 Configure the data format sent by the device ==
557 -
558 -
559 -(% style="color:blue" %)**AT+PRO=3,5**(%%) (Data is in Json format of MQTT)
560 -
561 -
562 -== 5.2 Set server address ==
563 -
564 -
565 -(% style="color:blue" %)**AT+SERVADDR=an5tk94sdgjat-ats.iot.us-east-1.amazonaws.com,8883**
566 -
567 -
568 -== 5.3 Set up private and public topics ==
569 -
570 -
571 571  AWS does not limit topics, so you can set any topic
572 572  
573 -(% style="color:blue" %)**AT+SUBTOPIC=Any**
304 +AT+SUBTOPIC=Any
574 574  
575 -(% style="color:blue" %)**AT+PUBTOPIC=Any**
306 +AT+PUBTOPIC=Any
576 576  
577 577  
578 -== 5.4 Set the TLS mode ==
309 +1. Set the TLS mode
579 579  
311 +AT+TLSMOD=1,2
580 580  
581 -(% data-sider-select-id="cf7bb573-8375-4479-9801-df8bb7dab3ba" style="color:blue" %)**AT+TLSMOD=1,2**
313 +To use the TLS mode certificate function, users need to configure the AT+TLSMOD command
582 582  
583 -To use the TLS mode certificate function, users need to configure the (% style="color:blue" %)**AT+TLSMOD**(%%) command.
315 +AT+TLSMOD=1,0  No authentication
584 584  
585 -(% style="color:blue" %)**AT+TLSMOD=1,0** (%%) ~/~/ No authentication
317 +AT+TLSMOD=1,1  Perform server authentication
586 586  
587 -(% style="color:blue" %)**AT+TLSMOD=1,1** (%%) ~/~/ Perform server authentication
319 +AT+TLSMOD=1,2  Perform server and client authentication if requested by the remote server.（In AWS we recommend using this mode）
588 588  
589 -(% style="color:blue" %)**AT+TLSMOD=1,2** (%%) ~/~/ Perform server and client authentication if requested by the remote server.(In AWS we recommend using this mode)
590 590  
322 +1. Restart the device
591 591  
592 -(% data-sider-select-id="f443b9bc-1195-4fe2-965d-7de84f78747f" %)
593 -== 5.5 Set the MQOS ==
594 594  
325 +1. View data on AWS
595 595  
596 -(% data-sider-select-id="cf7bb573-8375-4479-9801-df8bb7dab3ba" style="color:blue; font-weight:bold" %)**AT+MQOS**(% data-sider-select-id="cf7bb573-8375-4479-9801-df8bb7dab3ba" style="color:blue" %)**=XX （Depends on your server configuration）**
327 +1. Find MQTT test client in test
597 597  
598 -Please find it in AWS's MQTT test client
599 -
600 -[[image:image-20240529164339-1.png||height="480" width="927"]]
601 -
602 -
603 -(% data-sider-select-id="fef22158-6e5e-46e4-b59e-fe457e562376" %)
604 -== 5.6 Restart the device ==
605 -
606 -
607 -= 6. View data on AWS =
608 -
609 -== 6.1 Find MQTT test client in test ==
610 -
611 -
612 612  In the fourth step, fill in the topics you subscribed to before
613 613  
614 -(% style="color:blue" %)**AT+PUBTOPIC=XXXX**
331 +AT+PUBTOPIC=XXXX
615 615  
616 616  If you forget your previous topic, you can fill in #,subscribe to all topics
617 617  
618 -[[image:image-20240528175111-18.png||height="409" width="1014"]]
335 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image028.jpg]]
619 619  
337 +1. You can see published information in Subscriptions
620 620  
621 -== 6.2 The data published information in Subscriptions ==
339 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image030.jpg]]
622 622  
623 -
624 -[[image:image-20240528175133-19.png||height="563" width="1022"]]
625 -
626 -[[image:image-20240528175154-20.png||height="752" width="1042"]]
341 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image032.jpg]]
image-20240528175133-19.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -59.4 KB
Content
image-20240528175154-20.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -31.4 KB
Content
image-20240529164339-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -116.5 KB
Content
image-20240814155410-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.kai
Size
... ... @@ -1,1 +1,0 @@
1 -77.8 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0