Last modified by Mengting Qiu on 2025/03/06 13:42
<
From version < 21.1 >
edited by Bei Jinggeng
on 2024/05/28 17:51
To version < 24.6 >
edited by Xiaoling
on 2024/05/30 10:26
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Bei
1 +XWiki.Xiaoling
Content
... ... @@ -1,116 +1,149 @@
1 -**Table of Contents:**
1 +**Table of Contents: **
2 2  
3 3  {{toc/}}
4 4  
5 5  
6 6  
7 -= 1. Log in to the platform and find IOT core =
8 8  
8 +
9 +
10 +
11 +
12 +
13 +
14 += 1. Log in to the platform and find IoT core =
15 +
16 +
9 9  = 2. Create your own test policy =
10 10  
11 -1. First click the policy on the left, enter the page and click Create policy
19 +== 2.1 First click the policy on the left, enter the page and click Create policy ==
12 12  
13 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image002.jpg]]
14 14  
15 -=== 2)  After filling in a policy name for testing, the policy will be displayed on the page. ===
22 +[[image:image-20240528172927-2.png||height="377" width="931"]]
16 16  
24 +
25 +== 2.2 After filling in a policy name for testing, the policy will be displayed on the page ==
26 +
27 +
17 17  a. Fill in any name
18 18  
19 19  b. Configure the policy you created
20 20  
21 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image004.jpg]]
32 +[[image:image-20240528173144-3.png||height="572" width="931"]]
22 22  
34 +
23 23  c. After clicking to enter the policy configuration page, follow the clicking sequence below to go to the json configuration interface, and then fill in the following fields in the "statement" keyword:
24 24  
25 -{
26 26  
27 - "Version": "2012-10-17",
38 +**{**
28 28  
29 - "Statement": [
40 +**~ "Version": "2012-10-17",**
30 30  
31 - {
42 +**~ "Statement": [**
32 32  
33 - "Effect": "Allow",
44 +**~ {**
34 34  
35 - "Action": "",
46 +**~ "Effect": "Allow",**
36 36  
37 - "Resource": ""
48 +**~ "Action": "",**
38 38  
39 - }
50 +**~ "Resource": ""**
40 40  
41 - ]
52 +**~ }**
42 42  
43 -}
54 +**~ ]**
44 44  
56 +**}**
45 45  
46 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image006.jpg]]
47 47  
59 +[[image:image-20240528173203-4.png||height="517" width="942"]]
60 +
61 +
48 48  d. Create this policy
49 49  
50 50  
51 -1. Create a Things
65 += 3. Create a Things =
52 52  
53 -1. Create a single Things
67 +== 3.1 Create a single Things ==
54 54  
55 -1. Select Create Things
56 56  
57 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image008.jpg]]
70 +(% style="color:blue" %)**1. Select Create Things**
58 58  
59 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image010.jpg]]
72 +[[image:image-20240528173244-5.png||height="329" width="932"]]
60 60  
74 +[[image:image-20240528173500-6.png||height="484" width="928"]]
61 61  
62 -1. Fill in the name of the control item you want to create in the thing name column.
63 63  
77 +(% style="color:blue" %)**2. Fill in the name of the control item you want to create in the thing name column**
78 +
64 64  Use the default for other parameters
65 65  
66 66  Then click Next.
67 67  
68 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image012.jpg]]
83 +[[image:image-20240528173754-7.png||height="712" width="781"]]
69 69  
70 70  
71 -1. Choose to automatically generate a new certificate
86 +(% style="color:blue" %)**3. Choose to automatically generate a new certificate**
72 72  
73 73  Then click Next
74 74  
75 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image014.jpg]]
90 +[[image:image-20240528173829-8.png||height="547" width="782"]]
76 76  
77 -1. The next step is to choose a strategy
78 78  
93 +(% style="color:blue" %)**4. The next step is to choose a strategy**
94 +
79 79  Here you can choose a policy we created in the first step
80 80  
81 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image016.jpg]]
97 +[[image:image-20240528173851-9.png||height="580" width="785"]]
82 82  
83 83  
84 -1. When you click to create things, the certificate download page will pop up.
100 +(% style="color:blue" %)**5. When you click to create things, the certificate download page will pop up**
85 85  
86 -This certificate is very important. After creating the device, you must download the certificate of the device so that our NB device can connect normally.
87 87  
103 +**This certificate is very important.**(%%) After creating the device, you must download the certificate of the device so that our NB device can connect normally.
104 +
88 88  Please download all the following certificates and put them in a folder.
89 89  
90 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image018.jpg]]
107 +[[image:image-20240528173926-10.png]]
91 91  
92 92  
110 +(% style="color:blue" %)**6. You can see the things you just created in the things**
93 93  
94 -1. You can see the things you just created in the things
112 +[[image:image-20240528173951-11.png||height="381" width="1089"]]
95 95  
96 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image020.jpg]]
97 97  
115 += 4. Connect to AWS using Dragino-NB device =
98 98  
99 -1. Connect to AWS using Dragino-NB device
117 +== 4.1 For -NB /-NS model ==
100 100  
101 -1. Upgrade the firmware to configure TTS firmware to set the certificate
119 +=== 4.1.1 Upgrade the firmware to configure TTS firmware to set the certificate ===
102 102  
103 -1. Update method
104 -1. Firmware location
105 105  
106 -1. Configure certificate
122 +User can change device firmware to::
107 107  
124 +* Update with new features.
125 +
126 +* Fix bugs.
127 +
128 +Firmware and changelog can be downloaded from : **[[Set up TLS certificate - Dropbox>>https://www.dropbox.com/scl/fo/1ykfsesmr3702tj3kp663/AOOyH1GiVEOGR41gASuiDk0?rlkey=1q7a1b5yvjgt87d16w8tt0cum&st=vdy765ut&dl=0||data-sider-select-id="830d1b64-cb24-48b3-91e4-49da5c3f0783"]]**
129 +
130 +Methods to Update Firmware:
131 +
132 +* (Recommended way) OTA firmware update via BLE: [[**Instruction**>>url:http://wiki.dragino.com/xwiki/bin/view/Main/BLE_Firmware_Update_NB_Sensors_BC660K-GL/]].
133 +
134 +* Update through UART TTL interface : **[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART_Access_for_NB_ST_BC660K-GL/#H4.2UpdateFirmware28Assumethedevicealreadyhaveabootloader29]]**.
135 +
136 +=== 4.1.2 Configure certificate ===
137 +
138 +
108 108  After upgrade the firmware, the serial port displays as follows：
109 109  
110 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image022.jpg]]
141 +[[image:image-20240528174330-13.png||height="286" width="568"]]
111 111  
112 -1. Configure CA certificate.
113 113  
144 +==== 4.1.2.1  Configure CA certificate ====
145 +
146 +
114 114  Please input the certificate in PEM format for the user.
115 115  
116 116  Use the AT command AT+CACERT as follows:
... ... @@ -155,19 +155,21 @@
155 155  
156 156  ~-~-~-~--END CERTIFICATE~-~-~-~--}
157 157  
158 -Note: Be sure to add a terminator "}" at the end of the command. Otherwise, the command will not execute successfully.
191 +(% style="color:red" %)**Note: Be sure to add a terminator "}" at the end of the command. Otherwise, the command will not execute successfully.**
159 159  
160 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image023.jpg]]
193 +[[image:image-20240528174408-14.png]]
161 161  
162 162  
163 163  After successful execution, as shown in the following figure.
164 164  
165 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image024.jpg]]
198 +[[image:image-20240528174502-15.png]]
166 166  
167 -Display "Successfully configured CA certificate." If the configuration is successful, otherwise it is considered configuration failure.
200 +Display (% style="color:blue" %)**"Successfully configured CA certificate."**(%%) If the configuration is successful, otherwise it is considered configuration failure.
168 168  
169 -1. Configure client certificate.
170 170  
203 +==== 4.1.2.2 Configure client certificate ====
204 +
205 +
171 171  Use the AT command AT+CLICERT as follows：
172 172  
173 173  AT+CLICERT=~-~-~-~--BEGIN CERTIFICATE~-~-~-~--
... ... @@ -210,15 +210,16 @@
210 210  
211 211  ~-~-~-~--END CERTIFICATE~-~-~-~--}
212 212  
213 -Note: Be sure to add a terminator "}" at the end of the command. Otherwise, the command will not execute successfully.
248 +(% style="color:red" %)**Note: Be sure to add a terminator "}" at the end of the command. Otherwise, the command will not execute successfully.**
214 214  
250 +[[image:image-20240528174630-16.png||height="553" width="747"]]
215 215  
216 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image025.jpg]]
252 +Display (% style="color:blue" %)**"Successfully configured client certificate."**(%%) Configuration successful, otherwise configuration failed.
217 217  
218 -Display "Successfully configured client certificate." Configuration successful, otherwise configuration failed
219 219  
220 -1. Configure client private key.
255 +==== 4.1.2.3 Configure client private key ====
221 221  
257 +
222 222  Use the AT command AT+CLIKEY, as shown below
223 223  
224 224  AT+CLIKEY=~-~-~-~--BEGIN RSA PRIVATE KEY~-~-~-~--
... ... @@ -275,67 +275,312 @@
275 275  
276 276  ~-~-~-~--END RSA PRIVATE KEY~-~-~-~--}
277 277  
278 -Note: Be sure to add a terminator "}" at the end of the command. Otherwise, the command will not execute successfully.
314 +(% style="color:red" %)**Note: Be sure to add a terminator "}" at the end of the command. Otherwise, the command will not execute successfully.**
279 279  
316 +[[image:image-20240528174702-17.png]]
280 280  
281 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image026.jpg]]
318 +Display(% style="color:blue" %)** "Successfully configured client private key."**(%%) If the configuration is successful, otherwise it is considered configuration failure.
282 282  
283 -Display "Successfully configured client private key." If the configuration is successful, otherwise it is considered configuration failure
284 284  
285 -1. After the certificate configuration is completed, Re-upgrade to the firmware you originally used
321 +==== 4.1.2.4 Re-upgrade the firmware ====
286 286  
287 -1. Configure draginoNB-device
288 288  
289 -1. Configure the data format sent by the device
324 +After the certificate configuration is completed, Re-upgrade to the firmware you originally used.
290 290  
291 -AT+PRO=3,5(Data is in Json format of MQTT)
292 292  
327 +== 4.2  For -CB /-CS model ==
293 293  
294 -1. Set server address
329 +=== 4.2.1 Upgrade the firmware to configure TTS firmware to set the certificate ===
295 295  
296 -AT+SERVADDR=an5tk94sdgjat-ats.iot.us-east-1.amazonaws.com,8883
297 297  
332 +User can change device firmware to::
298 298  
334 +* Update with new features.
299 299  
300 -1. Set up private and public topics.
336 +* Fix bugs.
301 301  
338 +Firmware and changelog can be downloaded from : **[[Set up TLS certificate - Dropbox>>https://www.dropbox.com/scl/fo/mk9u5ux3cfo94ke0s67ik/ADOIOdwIQfCO2WUZt0MxXyU?rlkey=7o6uaywrebbnsvuj4r0r694x6&st=smrmjj7t&dl=0||data-sider-select-id="830d1b64-cb24-48b3-91e4-49da5c3f0783"]]**
339 +
340 +Methods to Update Firmware:
341 +
342 +* (Recommended way) OTA firmware update via BLE: [[**Instruction**>>url:http://wiki.dragino.com/xwiki/bin/view/Main/BLE_Firmware_Update_NB_Sensors_BC660K-GL/]].
343 +
344 +* Update through UART TTL interface : **[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART_Access_for_NB_ST_BC660K-GL/#H4.2UpdateFirmware28Assumethedevicealreadyhaveabootloader29]]**.
345 +
346 +
347 +
348 +=== 4.2.2 Configure certificate ===
349 +
350 +
351 +After upgrade the firmware, the serial port displays as follows：
352 +
353 +[[image:image-20240528174330-13.png||height="286" width="568"]]
354 +
355 +
356 +==== 4.2.2.1 Configure CA certificate ====
357 +
358 +
359 +Please input the certificate in PEM format for the user.
360 +
361 +Use the AT command AT+CACERT as follows:
362 +
363 +AT+CACERT=~-~-~-~--BEGIN CERTIFICATE~-~-~-~--
364 +
365 +MIIDQTCCAimgAwIBAgITBmyfz5m/jAo54vB4ikPmljZbyjANBgkqhkiG9w0BAQsF
366 +
367 +ADA5MQswCQYDVQQGEwJVUzEPMA0GA1UEChMGQW1hem9uMRkwFwYDVQQDExBBbWF6
368 +
369 +b24gUm9vdCBDQSAxMB4XDTE1MDUyNjAwMDAwMFoXDTM4MDExNzAwMDAwMFowOTEL
370 +
371 +MAkGA1UEBhMCVVMxDzANBgNVBAoTBkFtYXpvbjEZMBcGA1UEAxMQQW1hem9uIFJv
372 +
373 +b3QgQ0EgMTCCASIwDQYJKoZIhvcNAQEBBQADggEPADCCAQoCggEBALJ4gHHKeNXj
374 +
375 +ca9HgFB0fW7Y14h29Jlo91ghYPl0hAEvrAIthtOgQ3pOsqTQNroBvo3bSMgHFzZM
376 +
377 +9O6II8c+6zf1tRn4SWiw3te5djgdYZ6k/oI2peVKVuRF4fn9tBb6dNqcmzU5L/qw
378 +
379 +IFAGbHrQgLKm+a/sRxmPUDgH3KKHOVj4utWp+UhnMJbulHheb4mjUcAwhmahRWa6
380 +
381 +VOujw5H5SNz/0egwLX0tdHA114gk957EWW67c4cX8jJGKLhD+rcdqsq08p8kDi1L
382 +
383 +93FcXmn/6pUCyziKrlA4b9v7LWIbxcceVOF34GfID5yHI9Y/QCB/IIDEgEw+OyQm
384 +
385 +jgSubJrIqg0CAwEAAaNCMEAwDwYDVR0TAQH/BAUwAwEB/zAOBgNVHQ8BAf8EBAMC
386 +
387 +AYYwHQYDVR0OBBYEFIQYzIU07LwMlJQuCFmcx7IQTgoIMA0GCSqGSIb3DQEBCwUA
388 +
389 +A4IBAQCY8jdaQZChGsV2USggNiMOruYou6r4lK5IpDB/G/wkjUu0yKGX9rbxenDI
390 +
391 +U5PMCCjjmCXPI6T53iHTfIUJrU6adTrCC2qJeHZERxhlbI1Bjjt/msv0tadQ1wUs
392 +
393 +N+gDS63pYaACbvXy8MWy7Vu33PqUXHeeE6V/Uq2V8viTO96LXFvKWlJbYK8U90vv
394 +
395 +o/ufQJVtMVT8QtPHRh8jrdkPSHCa2XV4cdFyQzR1bldZwgJcJmApzyMZFo6IQ6XU
396 +
397 +5MsI+yMRQ+hDKXJioaldXgjUkK642M4UwtBV8ob2xJNDd2ZhwLnoQdeXeGADbkpy
398 +
399 +rqXRfboQnoZsG4q5WTP468SQvvG5
400 +
401 +~-~-~-~--END CERTIFICATE~-~-~-~--}
402 +
403 +(% style="color:red" %)**Note: Be sure to add a terminator "}" at the end of the command. Otherwise, the command will not execute successfully.**
404 +
405 +[[image:image-20240528174408-14.png]]
406 +
407 +
408 +After successful execution, as shown in the following figure.
409 +
410 +[[image:image-20240528174502-15.png]]
411 +
412 +Display (% style="color:blue" %)**"Successfully configured CA certificate."**(%%) If the configuration is successful, otherwise it is considered configuration failure.
413 +
414 +
415 +==== 4.2.2.2 Configure client certificate ====
416 +
417 +
418 +Use the AT command AT+CLICERT as follows：
419 +
420 +AT+CLICERT=~-~-~-~--BEGIN CERTIFICATE~-~-~-~--
421 +
422 +MIIDWTCCAkGgAwIBAgIUYSpJUzfb4NTa76JJxd2th0fZA8swDQYJKoZIhvcNAQEL
423 +
424 +BQAwTTFLMEkGA1UECwxCQW1hem9uIFdlYiBTZXJ2aWNlcyBPPUFtYXpvbi5jb20g
425 +
426 +SW5jLiBMPVNlYXR0bGUgU1Q9V2FzaGluZ3RvbiBDPVVTMB4XDTI0MDUyNDA4MDI0
427 +
428 +NVoXDTQ5MTIzMTIzNTk1OVowHjEcMBoGA1UEAwwTQVdTIElvVCBDZXJ0aWZpY2F0
429 +
430 +ZTCCASIwDQYJKoZIhvcNAQEBBQADggEPADCCAQoCggEBAMTdc1GQLVBohAeCJD6n
431 +
432 +6WTFAFrygTch90a5wUr2bhlVuDxvEhEKNcmu5vOCo5agmfLWb2VCxgezgvQOBYQ8
433 +
434 +1oTqXJNdl4tS0DICfqb/ogVHWGHRao67XyhbPNBS0j/nCPTIIk6+/NBeYPOjaG+p
435 +
436 +utfXE7SGIEcc3RevkYkUJx6y+WH7MLjj1mufuXBVWIL1RrfrIRPw6auVk7dhS5rU
437 +
438 +NvYcJa7Qd6gpAh1DzPj7ZECrv7fEIIBDEsSYOy6ToWtzqGIVcIAHBDfORB0Hcm+N
439 +
440 +7wG3KDf61P4aWkLlkP5pRUaUIQdVblxginmx2K3n8t/WP7QcfITa191rjEVVBXmk
441 +
442 +ROsCAwEAAaNgMF4wHwYDVR0jBBgwFoAUs8Caohh1ZGP8kjSn3rtxJiJJ9IswHQYD
443 +
444 +VR0OBBYEFCjwGwqD7FG9UCNm3wjFQX4HixzfMAwGA1UdEwEB/wQCMAAwDgYDVR0P
445 +
446 +AQH/BAQDAgeAMA0GCSqGSIb3DQEBCwUAA4IBAQBgqI49a4PBQZYrFM63TX3EHgdd
447 +
448 +N6Pj7AytjO+SrKNMCSo/OtIvhDTxOocr1vKrux1Tw5qmrllrIXLtlGtbmln5DS6a
449 +
450 +DTCLrjwcIFIabLxpx5DPY1WSMYvL04SW7d4Y+3SxOFNRotDSiomr8eIIac0d3HE2
451 +
452 +B5b0SnWZgWbrhjNUgvwo8l8tA9DOGIr2MeQ5kPjudOOiYSR3HC0v+jviBMV6VX8M
453 +
454 +LHVH3CRshHDKBGpV1NZ1RAm9EY/oRGtSiMsyjRh6hegC0vehwVxaC4w9qG0ASkzz
455 +
456 +42OOGfNqhYnYDiKTEIkazaoAFpTKDejWBaL7W5VpthUkQOl67IyX+ohuUKTo
457 +
458 +~-~-~-~--END CERTIFICATE~-~-~-~--}
459 +
460 +(% style="color:red" %)**Note: Be sure to add a terminator "}" at the end of the command. Otherwise, the command will not execute successfully.**
461 +
462 +[[image:image-20240528174630-16.png||height="553" width="747"]]
463 +
464 +Display (% style="color:blue" %)**"Successfully configured client certificate."**(%%) Configuration successful, otherwise configuration failed.
465 +
466 +
467 +==== 4.2.2.3 Configure client private key ====
468 +
469 +
470 +Use the AT command AT+CLIKEY, as shown below
471 +
472 +AT+CLIKEY=~-~-~-~--BEGIN RSA PRIVATE KEY~-~-~-~--
473 +
474 +MIIEpAIBAAKCAQEAxN1zUZAtUGiEB4IkPqfpZMUAWvKBNyH3RrnBSvZuGVW4PG8S
475 +
476 +EQo1ya7m84KjlqCZ8tZvZULGB7OC9A4FhDzWhOpck12Xi1LQMgJ+pv+iBUdYYdFq
477 +
478 +jrtfKFs80FLSP+cI9MgiTr780F5g86Nob6m619cTtIYgRxzdF6+RiRQnHrL5Yfsw
479 +
480 +uOPWa5+5cFVYgvVGt+shE/Dpq5WTt2FLmtQ29hwlrtB3qCkCHUPM+PtkQKu/t8Qg
481 +
482 +gEMSxJg7LpOha3OoYhVwgAcEN85EHQdyb43vAbcoN/rU/hpaQuWQ/mlFRpQhB1Vu
483 +
484 +XGCKebHYrefy39Y/tBx8hNrX3WuMRVUFeaRE6wIDAQABAoIBAFhAOcjvjBDGuaEw
485 +
486 +CxV3al49HfqnSZuwg0xWSztSm2qKDcwxsnSnEhO2b1vsTW9h0YGV9Vv8gg/Dvkmv
487 +
488 +23M7XqM4+IUraJsRZbl1etdcM4KQSCOZoF4Zyv+pXuq4pf31kQNCkHaikWzLUkUG
489 +
490 +FPQxr0vA49mCYwfd/ZL3ppM/0IWmxRwloV1Gb9q8iDBUcJGSDokZnT7diUxzzOcd
491 +
492 ++UJ6xUhFq1v46Y7vO+73XROLv34JEBC0bIw2ErL6+AbzhHwb2mkuSccG9Ks37g3Z
493 +
494 +dyyjjj8hm1wvHWepuWqEssaiS3HD5zAsI0v85xS8RwNj3zLfd8o1WC666n3CO+ij
495 +
496 +VdRmR4kCgYEA+/sEFxpfaRomqcLwJebZcZH06U1RfJFfnbH2/Q6fANf8zNxwWs9A
497 +
498 +O+jyk/CLhHYRIk6VIOMQmWwEYgJ2eAHfw2Diwj4/0eqkGu+yZOS6KTCewxSV73vc
499 +
500 +SvACramJy4y6yEgDN5onwR1XqfVMfA0LzTcSupHR/xvrpf/gCsNFPxUCgYEAyAFd
501 +
502 +nMUhJFSq3pOogxA43aJSkA8YuDS3jpBkKQ6vx81APpIMabQauOxFDt488TZGP3Yy
503 +
504 +lhpa/lfFIgu2K7CgV4dUp+JtJJoZ/F+ExxUUzdqB4zxzWywAcc3RebfwP6qASwFT
505 +
506 +G3mXYci4tgNWR+k5CSsuLXDk/OT5uo5GeGAEc/8CgYEAk6V8uxDP8STKnNRFpN/E
507 +
508 +b6CHciDE64m/DgbWY2cq0fK9BUjxaLRhvfj8EqVzCrWnyoNjLHcAJfW+B7PLuPvY
509 +
510 +IoJlvE1/Vb/4UnQ7ApVnY3VCwaoRRNc9uIcz+pAJ1sRqOarAf9cLDkPkNwktvM5k
511 +
512 +KOXpSnrhIms4w/bPT18l9xUCgYBsAMDKbXEuK0JyGw5+Z/4tQQCQpnZU0rLkm3ha
513 +
514 +64FkxaORplBprEZZ4cyQ8NW78/EPSAadI/JLMp5TejuPcDvFyGCgoBcMEuNBc1tC
515 +
516 +HlIzr3FAgl5Qt3wt+FTMA9YKq0nINxjn10s2FKwaLccj4f9YwiaXh0VAg22PnlDT
517 +
518 +pBYDhQKBgQCMwyKXJ4zYiDRdvLvgKzeuKaU4KNQItHE4KORPfkecjPoENt4bKxDw
519 +
520 +2EdNFQLIoqBHL1s+/8+SzhCI31V7pkTs1AqCxDExJS7+8Z5NQFQIo/jooUo0N80E
521 +
522 +y3ZZS6OLOXXscEqhMogf1grfbabXM9OkgTIq43cPQHtMGQiFAtIJkg==
523 +
524 +~-~-~-~--END RSA PRIVATE KEY~-~-~-~--}
525 +
526 +(% style="color:red" %)**Note: Be sure to add a terminator "}" at the end of the command. Otherwise, the command will not execute successfully.**
527 +
528 +[[image:image-20240528174702-17.png]]
529 +
530 +Display(% style="color:blue" %)** "Successfully configured client private key."**(%%) If the configuration is successful, otherwise it is considered configuration failure.
531 +
532 +
533 +==== 4.2.2.4 For -CB /-CS model Certificate setting error/change certificate ====
534 +
535 +
536 +(% data-sider-select-id="7c5a8abc-e707-467b-ac02-db0a89098320" %)When you set the wrong certificate or you need to re-set another certificate.
537 +Please use the following three commands：
538 +
539 +(% style="color:blue" %)**AT+DELCLIKEY}**
540 +
541 +(% style="color:blue" %)**AT+DELCLICERT}**
542 +
543 +(% style="color:blue" %)**AT+DELCACERT}**
544 +
545 +
546 +(% style="color:red" %)**Note: 1.When there is no certificate on the device, a deletion error will be displayed.
547 + 2.When the device already has a certificate, using the command to configure the certificate again will display a configuration error.**
548 +
549 +
550 += (% data-sider-select-id="6b5deb69-539b-42e1-a7bc-a300eb1fea73" %)5. Configure draginoNB-device(%%) =
551 +
552 +== 5.1 Configure the data format sent by the device ==
553 +
554 +
555 +(% style="color:blue" %)**AT+PRO=3,5**(%%) (Data is in Json format of MQTT)
556 +
557 +
558 +== 5.2 Set server address ==
559 +
560 +
561 +(% style="color:blue" %)**AT+SERVADDR=an5tk94sdgjat-ats.iot.us-east-1.amazonaws.com,8883**
562 +
563 +
564 +== 5.3 Set up private and public topics ==
565 +
566 +
302 302  AWS does not limit topics, so you can set any topic
303 303  
304 -AT+SUBTOPIC=Any
569 +(% style="color:blue" %)**AT+SUBTOPIC=Any**
305 305  
306 -AT+PUBTOPIC=Any
571 +(% style="color:blue" %)**AT+PUBTOPIC=Any**
307 307  
308 308  
309 -1. Set the TLS mode
574 +== 5.4 Set the TLS mode ==
310 310  
311 -AT+TLSMOD=1,2
312 312  
313 -To use the TLS mode certificate function, users need to configure the AT+TLSMOD command
577 +(% data-sider-select-id="cf7bb573-8375-4479-9801-df8bb7dab3ba" style="color:blue" %)**AT+TLSMOD=1,2**
314 314  
315 -AT+TLSMOD=1,0  No authentication
579 +To use the TLS mode certificate function, users need to configure the (% style="color:blue" %)**AT+TLSMOD**(%%) command.
316 316  
317 -AT+TLSMOD=1,1  Perform server authentication
581 +(% style="color:blue" %)**AT+TLSMOD=1,0** (%%) ~/~/ No authentication
318 318  
319 -AT+TLSMOD=1,2  Perform server and client authentication if requested by the remote server.（In AWS we recommend using this mode）
583 +(% style="color:blue" %)**AT+TLSMOD=1,1** (%%) ~/~/ Perform server authentication
320 320  
585 +(% style="color:blue" %)**AT+TLSMOD=1,2** (%%) ~/~/ Perform server and client authentication if requested by the remote server.(In AWS we recommend using this mode)
321 321  
322 -1. Restart the device
323 323  
588 +(% data-sider-select-id="f443b9bc-1195-4fe2-965d-7de84f78747f" %)
589 +== 5.5 Set the MQOS ==
324 324  
325 -1. View data on AWS
326 326  
327 -1. Find MQTT test client in test
592 +(% data-sider-select-id="cf7bb573-8375-4479-9801-df8bb7dab3ba" style="color:blue; font-weight:bold" %)**AT+MQOS**(% data-sider-select-id="cf7bb573-8375-4479-9801-df8bb7dab3ba" style="color:blue" %)**=XX （Depends on your server configuration）**
328 328  
594 +Please find it in AWS's MQTT test client
595 +
596 +[[image:image-20240529164339-1.png||height="480" width="927"]]
597 +
598 +
599 +(% data-sider-select-id="fef22158-6e5e-46e4-b59e-fe457e562376" %)
600 +== 5.6 Restart the device ==
601 +
602 +
603 += 6. View data on AWS =
604 +
605 +== 6.1 Find MQTT test client in test ==
606 +
607 +
329 329  In the fourth step, fill in the topics you subscribed to before
330 330  
331 -AT+PUBTOPIC=XXXX
610 +(% style="color:blue" %)**AT+PUBTOPIC=XXXX**
332 332  
333 333  If you forget your previous topic, you can fill in #,subscribe to all topics
334 334  
335 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image028.jpg]]
614 +[[image:image-20240528175111-18.png||height="409" width="1014"]]
336 336  
337 -1. You can see published information in Subscriptions
338 338  
339 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image030.jpg]]
617 +== 6.2 The data published information in Subscriptions ==
340 340  
341 -[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image032.jpg]]
619 +
620 +[[image:image-20240528175133-19.png||height="563" width="1022"]]
621 +
622 +[[image:image-20240528175154-20.png||height="752" width="1042"]]
image-20240529164339-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +116.5 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0