NB-IoT/LTE-M Configuration Guides
Configuration, firmware update, network server, and platform integration guides for Dragino NB-IoT, LTE-M, and LTE CAT-1 end nodes.
General Configure for -NB / -NS Models
APN, network attach, uplink mode, downlink, and server configuration for BC660K-GL based NB-IoT models.
General Configure for -CB / -CS Models
Configuration guide for BG95 based NB-IoT and LTE-M models with -CB or -CS suffix.
UART/TTL Configuration & Firmware Update
Use UART/TTL access for AT commands, firmware upgrade, and low-level device maintenance.
Firmware Update via BLE
Update NB-IoT and LTE-M end node firmware from a mobile phone over BLE.
OTA Firmware Update
Remote firmware update workflow for compatible NB-IoT and LTE-M end nodes.
BC660-GL Module FOTA Upgrade
Upgrade the BC660K-GL module firmware by using the module debug serial port.
General Manual for -FB / -FS Models
Network attach, server configuration, downlink, FAQ, and battery guidance for nRF9151 based -FB and -FS models.
-FB / -FS Firmware Update Guide
OTA, J-Link, and USB-TTL firmware update workflows for -FB and -FS series devices.
Set up CoAP Server
Install and test an EMQX CoAP/MQTT server for NB-IoT data uplink.
NB/CB MQTT TLS Certificate
Write TLS certificates to NB/CB devices with the latest protocol stack for secure MQTT connections.
Connect NB Device to AWS
Configure Dragino NB-IoT devices to connect and send data to AWS IoT services.