Last modified by Mengting Qiu on 2024/04/02 17:03
<
From version < 67.6 >
edited by Xiaoling
on 2022/11/18 10:23
To version < 65.1 >
edited by Xiaoling
on 2022/11/18 09:36
>
Change comment: Uploaded new attachment "image-20221118093658-4.png", version {1}

Summary

Details

Page properties
Content
... ... @@ -9,12 +9,10 @@
9 9  
10 10  **Table of Contents：**
11 11  
12 -{{toc/}}
13 13  
14 14  
15 15  
16 16  
17 -
18 18  = 1.  Introduction =
19 19  
20 20  == 1.1 ​ What is NDS03A NB-IoT Open/Close Door Sensor ==
... ... @@ -171,7 +171,7 @@
171 171  
172 172  
173 173  
174 -= 2.  Use NDS03A to communicate with IoT Server =
172 += 2.  Use CPN01 to communicate with IoT Server =
175 175  
176 176  == 2.1  How it works ==
177 177  
... ... @@ -256,7 +256,7 @@
256 256  (% style="color:red" %)**Note: if you don't have a CoAP server, you can refer this link to set up a CoAP server: **(%%)[[**http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/**>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/]]
257 257  
258 258  
259 -(% style="color:blue" %)**Use below commands in NDS03A:**
257 +(% style="color:blue" %)**Use below commands in CPN01:**
260 260  
261 261  * (% style="color:#037691" %)**AT+PRO=1**                (%%) ~/~/ Set to use CoAP protocol to uplink
262 262  
... ... @@ -269,7 +269,7 @@
269 269  [[image:image-20221021110948-8.png]]
270 270  
271 271  
272 -After configuring the server address and (% style="color:green" %)**reset NDS03A**(%%) (via AT+ATZ ), NDS03A will start to uplink sensor values to the CoAP server.
270 +After configuring the server address and (% style="color:green" %)**reset CPN01**(%%) (via AT+ATZ ), NDS03A will start to uplink sensor values to the CoAP server.
273 273  
274 274  [[image:image-20221021110956-9.png]] ​
275 275  
... ... @@ -364,13 +364,13 @@
364 364  
365 365  (% border="1" cellspacing="5" style="background-color:#ffffcc; color:green; width:693px" %)
366 366  |=(% scope="row" style="width: 93px;" %)**Size(bytes)**|(% style="width:67px" %)**8**|(% style="width:40px" %)**2**|(% style="width:45px" %)**2**|(% style="width:75px" %)**1**|(% style="width:54px" %)**1**|(% style="width:62px" %)**1**|(% style="width:60px" %)**1**|(% style="width:94px" %)**3**|(% style="width:93px" %)**3**
367 -|=(% style="width: 93px;" %)**Value**|(% style="width:67px" %)[[Device ID>>||anchor="H2.4.1A0A0DeviceID"]]|(% style="width:40px" %)[[Ver>>||anchor="H2.4.2A0VersionInfo"]]|(% style="width:45px" %)[[BAT>>||anchor="H2.4.3A0BatteryInfo"]]|(% style="width:75px" %)[[Signal Strength>>||anchor="H2.4.4A0SignalStrength"]]|(% style="width:54px" %)MOD|(% style="width:62px" %)Door Status|(% style="width:60px" %)[[Alarm Status>>||anchor="H2.7A0AlarmBaseonTimeout"]]|(% style="width:94px" %)door open num(pb14) |(% style="width:93px" %)last open time(pb14)
365 +|=(% style="width: 93px;" %)**Value**|(% style="width:67px" %)[[Device ID>>||anchor="H2.4.1A0A0DeviceID"]]|(% style="width:40px" %)[[Ver>>||anchor="H2.4.2A0VersionInfo"]]|(% style="width:45px" %)[[BAT>>||anchor="H2.4.3A0BatteryInfo"]]|(% style="width:75px" %)[[Signal Strength>>||anchor="H2.4.4A0SignalStrength"]]|(% style="width:54px" %)MOD|(% style="width:62px" %)Door Status|(% style="width:60px" %)[[Alarm Status>>||anchor="H2.4.6A0Alarm"]]|(% style="width:94px" %)door open num(pb14) |(% style="width:93px" %)last open time(pb14)
368 368  
369 369  (% border="1.5" style="background-color:#ffffcc; color:green; width:490px" %)
370 370  |(% style="width:50px" %)**4**|(% style="width:70px" %)**1**|(% style="width:50px" %)**3**|(% style="width:99px" %)**3**|(% style="width:67px" %)4|(% style="width:50px" %)(((
371 371  **1-32 group**
372 372  )))
373 -|(% style="width:98px" %)[[Time stamp>>||anchor="H2.4.7A0Timestamp"]]|(% style="width:115px" %)Door Status(pb14)|(% style="width:92px" %)door open num(pb14)|(% style="width:99px" %)last open time(pb14)|(% style="width:67px" %)Time stamp|(% style="width:74px" %)...
371 +|(% style="width:98px" %)[[Time stamp>>||anchor="H2.4.10A0Timestamp"]]|(% style="width:115px" %)Door Status(pb14)|(% style="width:92px" %)door open num(pb14)|(% style="width:99px" %)last open time(pb14)|(% style="width:67px" %)Time stamp|(% style="width:74px" %)...
374 374  
375 375  (% style="color:blue" %)**When AT+TTRCHANNEL=2:**
376 376  
... ... @@ -377,17 +377,17 @@
377 377  
378 378  (% border="1" cellspacing="5" style="background-color:#ffffcc; color:green; width:520px" %)
379 379  |=(% scope="row" style="width: 96px;" %)**Size(bytes)**|(% style="width:66px" %)**8**|(% style="width:40px" %)**2**|(% style="width:46px" %)**2**|(% style="width:70px" %)**1**|(% style="width:54px" %)**1**|(% style="width:55px" %)**1**|(% style="width:57px" %)**1**|(% style="width:86px" %)**3**|(% style="width:82px" %)**3**
380 -|=(% style="width: 96px;" %)**Value**|(% style="width:66px" %)[[Device ID>>||anchor="H2.4.1A0A0DeviceID"]]|(% style="width:40px" %)[[Ver>>||anchor="H2.4.2A0VersionInfo"]]|(% style="width:46px" %)[[BAT>>||anchor="H2.4.3A0BatteryInfo"]]|(% style="width:70px" %)[[Signal Strength>>||anchor="H2.4.4A0SignalStrength"]]|(% style="width:54px" %)MOD|(% style="width:55px" %)Door Status(pb14)|(% style="width:57px" %)[[Alarm Status>>||anchor="H2.7A0AlarmBaseonTimeout"]](pb14)|(% style="width:86px" %)door open num(pb14) |(% style="width:82px" %)last open time(pb14)
378 +|=(% style="width: 96px;" %)**Value**|(% style="width:66px" %)[[Device ID>>||anchor="H2.4.1A0A0DeviceID"]]|(% style="width:40px" %)[[Ver>>||anchor="H2.4.2A0VersionInfo"]]|(% style="width:46px" %)[[BAT>>||anchor="H2.4.3A0BatteryInfo"]]|(% style="width:70px" %)[[Signal Strength>>||anchor="H2.4.4A0SignalStrength"]]|(% style="width:54px" %)MOD|(% style="width:55px" %)Door Status|(% style="width:57px" %)[[Alarm Status>>||anchor="H2.4.6A0Alarm"]]|(% style="width:86px" %)door open num(pb14) |(% style="width:82px" %)last open time(pb14)
381 381  
382 382  (% border="1" cellspacing="5" style="background-color:#ffffcc; color:green; width:520px" %)
383 383  |(% style="width:59px" %)**1**|(% style="width:67px" %)**1**|(% style="width:88px" %)**3**|(% style="width:81px" %)**3**|(% style="width:50px" %)**4**|(% style="width:66px" %)**1**|(% style="width:92px" %)**3**
384 -|(% style="width:59px" %)Door Status(pb15)|(% style="width:67px" %)[[Alarm Status>>||anchor="H2.7A0AlarmBaseonTimeout"]](pb15)|(% style="width:88px" %)door open num(pb15)|(% style="width:81px" %)last open time(pb15)|(% style="width:50px" %)[[Time stamp>>||anchor="H2.4.7A0Timestamp"]]|(% style="width:66px" %)Door Status(pb14)|(% style="width:92px" %)door open num(pb14)
382 +|(% style="width:59px" %)Door Status(pb15)|(% style="width:67px" %)[[Alarm Status>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPN01-%20NB-IoT%20Outdoor%20OpenClose%20Dry%20Contact%20Sensor%C2%A0User%20Manual/#H2.4.7A0ContactStatus]](pb15)|(% style="width:88px" %)door open num(pb15)|(% style="width:81px" %)last open time(pb15)|(% style="width:50px" %)Time stamp|(% style="width:66px" %)Door Status(pb14)|(% style="width:92px" %)door open num(pb14)
385 385  
386 386  (% border="1" cellspacing="5" style="background-color:#ffffcc; color:green; width:500px" %)
387 387  |(% style="width:102px" %)**3**|(% style="width:93px" %)**1**|(% style="width:91px" %)**3**|(% style="width:88px" %)**3**|(% style="width:63px" %)**4**|(% style="width:87px" %)(((
388 388  **1-32 group**
389 389  )))
390 -|(% style="width:102px" %)last open time (pb14)|(% style="width:93px" %)Door Status(pb15)|(% style="width:91px" %)door open num(pb15)|(% style="width:88px" %)last open time(pb15)|(% style="width:63px" %)[[Time stamp>>||anchor="H2.4.7A0Timestamp"]]|(% style="width:87px" %)......
388 +|(% style="width:102px" %)last open time (pb14)|(% style="width:93px" %)Door Status(pb15)|(% style="width:91px" %)door open num(pb15)|(% style="width:88px" %)last open time(pb15)|(% style="width:63px" %)Time stamp|(% style="width:87px" %)...
391 391  
392 392  If we use the MQTT client to subscribe to this MQTT topic, we can see the following information when the NDS03A uplink data.
393 393  
... ... @@ -522,7 +522,7 @@
522 522  
523 523  * (% style="color:#037691" %)**Reset**
524 524  
525 -If payload = 0x04FF, it will reset the NDS03A
523 +If payload = 0x04FF, it will reset the NSE01
526 526  
527 527  * (% style="color:#037691" %)**INTMOD**
528 528  
... ... @@ -533,16 +533,16 @@
533 533  == 2.6  ​LED Indicator ==
534 534  
535 535  
536 -The NDS03A has an internal LED which is to show the status of different states.
534 +The CPN01 has an internal LED which is to show the status of different states.
537 537  
538 538  * When the device starts normally, the LED will light up for 1 second.
539 -* After NDS03A join NB-IoT network. The LED will be ON for 3 seconds.
537 +* After CPN01 join NB-IoT network. The LED will be ON for 3 seconds.
540 540  * For each uplink probe, LED will be on for 500ms.
541 541  
542 542  == 2.7  Alarm Base on Timeout ==
543 543  
544 544  
545 -NDS03A can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:
543 +CPN01 can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:
546 546  
547 547  
548 548  (% style="color:blue" %)**1. Keep Status: Status to be monitor**
... ... @@ -558,25 +558,17 @@
558 558  
559 559  If keep time = 0, Disable Alarm Base on Timeout feature.
560 560  
561 -If keep time > 0, device will monitor the keep status event and send an alarm when status doesn't change after timeout.
559 +If keep time > 0, device will monitor the keep status event and send an alarm when status doesn’t change after timeout.
562 562  
563 563  
564 564  (% style="color:blue" %)**AT Command to configure:**
565 565  
566 -(% style="color:blue" %)**PB14 PIN:**
564 +(% style="color:#037691" %)**AT+TTRIG=1,30** (%%) **~-~->**  When the **Keep Status** change from connected to disconnect, and device remains in disconnect status for more than 30 seconds. CPN01 will send an uplink packet, the [[Alarm bit>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H2.3.3Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2]] (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
567 567  
568 -(% style="color:#037691" %)**AT+TTRIG=1,30** (%%) **~-~->**  When the **Keep Status** change from connected to disconnect, and device remains in disconnect status for more than 30 seconds. NDS03A will send an uplink packet, the [[Alarm bit>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H2.3.3Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2]] (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
569 -
570 570  (% style="color:#037691" %)**AT+TTRIG=0,0 ** (%%) **~-~->** Default Value, disable timeout Alarm.
571 571  
572 572  
573 -(% style="color:blue" %)**PB15 PIN:**
574 574  
575 -(% style="color:#037691" %)**AT+TTRIG2=1,30**
576 -
577 -(% style="color:#037691" %)**AT+TTRIG2=0,0 **
578 -
579 -
580 580  == 2.8  Set debug mode ==
581 581  
582 582  
... ... @@ -599,73 +599,64 @@
599 599  
600 600  
601 601  
602 -== 2.10  Count Mod ==
592 +== 2.10  Set trigger mode ==
603 603  
604 604  
605 -(% style="color:blue" %)**AT Command: AT+COUNTMOD**
595 +(% style="color:blue" %)**AT Command: AT+TTRMOD**
606 606  
607 -[[image:image-20221118092935-1.png]]
597 +Feature: Set the trigger interrupt mode.
608 608  
599 +[[image:image-20221021111552-20.png]]
609 609  
610 610  
611 -== 2.11  Interrupt Pin Channel Mod ==
612 612  
603 +== 2.11  Set the calculate flag ==
613 613  
614 -(% style="color:blue" %)**AT Command: AT+TTRCHANNEL**
615 615  
616 -[[image:image-20221118093144-2.png]]
606 +Feature: Set the calculate flag
617 617  
608 +(% style="color:blue" %)**AT Command: AT+CALCFLAG**
618 618  
610 +[[image:image-20221021111711-22.png]]
619 619  
620 -== 2.12 TTRIG1/2 timeout status alarm ==
621 621  
622 622  
623 -It needs to be used with AT+TTRIG1 or AT+TTRIG2. When TTRIG1 or TTRIG2 times out and causes an alarm, and the status does not change subsequently, an alarm packet will be sent at the alarm interval.
614 +== 2.12 Set count number ==
624 624  
625 -(% style="color:blue" %)**AT Command: AT+TTRALARM**
626 626  
627 -[[image:image-20221118093512-3.png]]
617 +Feature: Manually set the count number
628 628  
619 +(% style="color:blue" %)**AT Command: AT+SETCNT**
629 629  
621 +[[image:image-20221021111748-24.png]]
630 630  
631 -== 2.13  Select counting mode ==
632 632  
633 633  
634 -(% style="color:blue" %)**AT Command: AT+TTRMODx=a,b**
625 +== 2.13  Set the number of data to be uploaded and the recording time ==
635 635  
636 -When (% style="color:red" %)**a=0**(%%), the door is opened to count, and when (% style="color:red" %)**a=1**(%%),the closed door is counted.
637 637  
638 -When (% style="color:red" %)**b=0**(%%), it is the last door open duration, and when (% style="color:red" %)**b=1**(%%),the last door close duration.
628 +(% style="color:blue" %)**AT Command:**
639 639  
640 -[[image:image-20221118093658-4.png]]
630 +(% style="color:#037691" %)**AT+TR=900**        (%%)~/~/  The unit is seconds, and the default is to record data once every 900 seconds.( The minimum can be set to 180 seconds)
641 641  
632 +(% style="color:#037691" %)**AT+NOUD=8 ** (%%)~/~/  The device uploads 8 sets of recorded data by default. Up to 32 sets of record data can be uploaded.
642 642  
643 643  
644 644  
645 -== 2.14  Set the number of data to be uploaded and the recording time ==
636 +== 2.14  Read or Clear cached data ==
646 646  
647 647  
648 648  (% style="color:blue" %)**AT Command:**
649 649  
650 -(% style="color:#037691" %)**AT+TR=900**(%%)  ~/~/  The unit is seconds, and the default is to record data once every 900 seconds.( The minimum can be set to 180 seconds)
651 -
652 -(% style="color:#037691" %)**AT+NOUD=8**(%%)** ** ~/~/  The device uploads 0 sets of recorded data by default. Up to 32 sets of record data can be uploaded.
653 -
654 -
655 -== 2.15  Read or Clear cached data ==
656 -
657 -
658 -(% style="color:blue" %)**AT Command:**
659 -
660 660  (% style="color:#037691" %)**AT+CDP**  (%%) ~/~/ Read cached data
661 661  
662 662  (% style="color:#037691" %)**AT+CDP=0**  (%%) ~/~/ Clear cached data ​
663 663  
664 -[[image:image-20221118094227-5.png]]
645 +[[image:image-20221021111810-25.png||height="364" width="797"]]
665 665  
666 666  
667 667  
668 -== 2.16  ​Firmware Change Log ==
649 +== 2.15  ​Firmware Change Log ==
669 669  
670 670  
671 671  Download URL & Firmware Change log:  [[https:~~/~~/www.dropbox.com/sh/8p5nuvo6gh7je4n/AAAMP7MMusgbXMz9Ik7Ls03Ga?dl=0>>https://www.dropbox.com/sh/8p5nuvo6gh7je4n/AAAMP7MMusgbXMz9Ik7Ls03Ga?dl=0]]
... ... @@ -674,13 +674,13 @@
674 674  
675 675  
676 676  
677 -== 2.17  ​Battery Analysis ==
658 +== 2.16  ​Battery Analysis ==
678 678  
679 679  
680 -=== 2.17.1  ​Battery Type ===
661 +=== 2.16.1  ​Battery Type ===
681 681  
682 682  
683 -The NDS03A battery is a combination of an 8500mAh Li/SOCI2 Battery and a Super Capacitor. The battery is non-rechargeable battery type with a low discharge rate (<2% per year). This type of battery is commonly used in IoT devices such as water meter.
664 +The CPN01 battery is a combination of an 8500mAh Li/SOCI2 Battery and a Super Capacitor. The battery is non-rechargeable battery type with a low discharge rate (<2% per year). This type of battery is commonly used in IoT devices such as water meter.
684 684  
685 685  The battery is designed to last for several years depends on the actual use environment and update interval. 
686 686  
... ... @@ -696,7 +696,7 @@
696 696  
697 697  
698 698  
699 -=== 2.17.2  Power consumption Analyze ===
680 +=== 2.16.2  Power consumption Analyze ===
700 700  
701 701  
702 702  Dragino battery powered product are all runs in Low Power mode. We have an update battery calculator which base on the measurement of the real device. User can use this calculator to check the battery life and calculate the battery life if want to use different transmit interval.
... ... @@ -719,7 +719,7 @@
719 719  
720 720  
721 721  
722 -=== 2.17.3  ​Battery Note ===
703 +=== 2.16.3  ​Battery Note ===
723 723  
724 724  
725 725  The Li-SICO battery is designed for small current / long period application. It is not good to use a high current, short period transmit method. The recommended minimum period for use of this battery is 5 minutes. If you use a shorter period time to transmit LoRa, then the battery life may be decreased.
... ... @@ -726,10 +726,10 @@
726 726  
727 727  
728 728  
729 -=== 2.17.4  Replace the battery ===
710 +=== 2.16.4  Replace the battery ===
730 730  
731 731  
732 -The default battery pack of NDS03A includes a ER26500 plus super capacitor. If user can't find this pack locally, they can find ER26500 or equivalence without the SPC1520 capacitor, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes).
713 +The default battery pack of CPN01 includes a ER26500 plus super capacitor. If user can't find this pack locally, they can find ER26500 or equivalence without the SPC1520 capacitor, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes).
733 733  
734 734  
735 735  
... ... @@ -740,7 +740,7 @@
740 740  
741 741  The AT Command set can refer the BC35-G NB-IoT Module AT Command: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=datasheet/other_vendors/BC35-G/>>url:https://www.dragino.com/downloads/index.php?dir=datasheet/other_vendors/BC35-G/]] 
742 742  
743 -[[image:image-20221118094449-6.png]] ​
724 +[[image:image-20221021112006-28.png]] ​
744 744  
745 745  
746 746  
... ... @@ -793,21 +793,15 @@
793 793  
794 794  AT+ DEBUG   : Enable or Disable debug mode
795 795  
796 -AT+ TTRIG1   : Get or Set PB14 PIN Alarm Base on Timeout
777 +AT+ TTRIG   : Get or Set Alarm Base on Timeout
797 797  
798 -AT+ TTRIG2   : Get or Set PB15 PIN Alarm Base on Timeout
779 +AT+ TTRMOD   : Get or Set the trigger interrupt mode(0:falling,1:rising)
799 799  
800 -AT+COUNTMOD  :  Get or Set the count mode
781 +AT+ CALCFLAG   : Get or Set the calculate flag
801 801  
802 -AT+TTRCHANNEL  : Get or Set the number of interrupt channels
783 +AT+ CLRC   : Clear current door open count
803 803  
804 -AT+TTRALARM : Get or Set TTRIG1 of Alarm interval (unit: minute)
805 805  
806 -AT+DISALARM  : Enable/Disable Alarm for door open/close or water leak event
807 -
808 -AT+ CLRC   :  Clear current door open count
809 -
810 -
811 811  (% style="color:blue" %)**COAP Management**      
812 812  
813 813  AT+URI            : Resource parameters
... ... @@ -849,7 +849,7 @@
849 849  
850 850  Please see this link for how to upgrade:  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList]]
851 851  
852 -(% style="color:red" %)**Notice: **(% style="color:blue" %)**NDS03A** (%%)**and (% style="color:blue" %)LDS03A(%%)**(% style="color:blue" %) (%%)**share the same mother board. They use the same connection and method to update.**
827 +(% style="color:red" %)**Notice: **(% style="color:blue" %)**CPN01** (%%)**and (% style="color:blue" %)CPL01(%%)**(% style="color:blue" %) (%%)**share the same mother board. They use the same connection and method to update.**
853 853  
854 854  
855 855  
... ... @@ -873,7 +873,7 @@
873 873  = 7. ​ Order Info =
874 874  
875 875  
876 -Part Number**:** NDS03A
851 +Part Number**:** CPN01
877 877  
878 878  
879 879  
... ... @@ -882,8 +882,14 @@
882 882  
883 883  (% style="color:blue" %)**Package Includes**:
884 884  
885 -* NDS03A Open/Close Door Sensor x 1
860 +* CPN01 Open/Close Sensor x 1
861 +* External antenna x 1
886 886  
863 +(% style="color:blue" %)**Dimension and weight**:
864 +
865 +* Size: 195 x 125 x 55 mm
866 +* Weight:   420g
867 +
887 887  = 9.  Support =
888 888  
889 889  
image-20221118094227-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -29.2 KB
Content
image-20221118094449-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -76.5 KB
Content

Applications

Navigation

Copyright ©2010-2022 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0