LHT52 - LoRaWAN Temperature & Humidity Sensor User Manual

The Dragino LHT52 Temperature & Humidity sensor is a Long Range LoRaWAN Sensor. It includes a (% style="color:blue" %)**built-in Temperature & Humidity sensor** (%%)and has a USB Type-C sensor connector to connect to external sensors such as external Temperature Sensor.

27

)))

28

29

(((

30

LHT52 (% style="color:blue" %)**senses environment temperature and humidity**(%%) and send these values via long-range wireless LoRaWAN protocol. It targets professional wireless sensor network applications such as food service, smart metering, smart cities, building automation, and so on.

)))

(((

LHT52 supports(% style="color:blue" %)** 2 x AAA batteries **(%%)and works for a long time up to several years. Use can replace the batteries easily after they are finished.

)))

(((

LHT52 is fully compatible with LoRaWAN v1.0.3 protocol, it can work with standard LoRaWAN gateway.

)))

(((

LHT52 supports(% style="color:blue" %)** Datalog feature** (%%)to make sure users won't miss sensor data. It records sensor value for every uplink. These values can be retrieved by LoRaWAN server via downlink command.

)))

(((

LHT52 supports(% style="color:blue" %)** temperature alarm feature**(%%). It can uplink alarm in a short interval while temperature exceeds preset limits.

)))

(((

*Battery life depends how often to send data, please see [[battery analyzer>>||anchor="H4.2A0PowerConsumptionAnalyze"]].

51

)))

52

53

[[image:1655774519494-861.png]]

== 1.2 Features ==

* Wall Attachable.

* LoRaWAN v1.0.3 Class A protocol.

61

* Built-in Temperature & Humidity sensor

62

* Optional External Probe

63

* Frequency Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915

64

* AT Commands to change parameters

65

* Remote configure parameters via LoRaWAN Downlink

66

* Firmware upgradable via program port

67

* Support 2 x AAA LR03 batteries.

* Datalog feature

* IP Rating: IP52

== 1.3 Specification ==

74

75

76

**Built-in Temperature Sensor:**

77

78

* Resolution: 0.01 °C

79

* Accuracy Tolerance: Typ ±0.3 °C

80

* Long Term Drift: < 0.02 °C/yr

81

* Operating Range: -20 ~~ 50 °C

82

83

**Built-in Humidity Sensor:**

84

85

* Resolution: 0.1 %RH

86

* Accuracy Tolerance: Typ ±3 %RH

87

* Long Term Drift: < 0.02 °C/yr

88

* Operating Range: 0 ~~ 99.0 %RH(no Dew)

== 1.4 Power Consumption ==

93

94

95

LHT52 (without external sensor): Idle: 5uA, Transmit: max 110mA

96

97

LHT52 + External Temperature Probe (AS-01): Idle: 6uA, Transmit: max 110mA.

== 1.5 Storage & Operation Temperature ==

-20°C to +50°C

== 1.6 Applications ==

109

110

111

* Smart Buildings & Home Automation

112

* Logistics and Supply Chain Management

* Smart Metering

* Smart Agriculture

* Smart Cities

* Smart Factory

= 2. Operation Mode =

121

122

123

== 2.1 How it work? ==

124

125

126

Each LHT52 is shipped with a worldwide unique set of LoRaWAN OTAA keys. To use LHT52 in a LoRaWAN network, user needs to input the OTAA keys in LoRaWAN network server. After this, if LHT52 is under this LoRaWAN network coverage, LHT52 can join the LoRaWAN network and start to transmit sensor data. The default period for each uplink is** 20 minutes**.

== 2.2 How to Activate LHT52? ==

131

132

133

(% style="color:red" %)** 1. Open enclosure from below position.**

134

135

[[image:image-20220621093835-1.png]]

136

137

138

(% style="color:red" %)** 2. Insert 2 x AAA LR03 batteries.**

139

140

[[image:image-20220621093835-2.png]]

141

142

143

(% style="color:red" %)** 3. Press the reset button to activate device.**

144

145

[[image:image-20220621093835-3.png]]

146

147

148

User can check [[LED Status>>||anchor="H2.8LEDIndicator"]] to know the working state of LHT52.

== 2.3 Example to join LoRaWAN network ==

153

154

155

This section shows an example for how to join the [[TheThingsNetwork>>url:https://www.thethingsnetwork.org/]] LoRaWAN IoT server. Usages with other LoRaWAN IoT servers are of similar procedure.

156

157

158

(% _mstvisible="1" class="wikigeneratedid" %)

159

[[image:1655775912928-657.png]]

160

161

Assume the DLOS8 is already set to connect to [[TTN V3 network >>url:https://eu1.cloud.thethings.network/]]. We need to add the LHT52 device in TTN V3 portal.

162

163

164

(% style="color:blue" %)**Step 1**(%%): Create a device in TTN V3 with the OTAA keys from LHT52.

165

166

Each LHT52 is shipped with a sticker with the default DEV EUI as below:

167

168

169

[[image:image-20220617150003-1.jpeg]]

170

171

172

Enter these keys in the LoRaWAN Server portal. Below is TTN V3 screen shot:

173

174

Add APP EUI in the application.

175

176

choose to create the device manually.

177

178

Add APP KEY and DEV EUI

179

180

181

[[image:image-20220522232916-3.png||_mstalt="430495" _mstvisible="3"]]

182

183

[[image:1655776122894-257.png]]

**Default mode OTAA**

188

189

190

[[image:1655776241177-240.png]]

(% style="color:blue" %)**Step 2**(%%): Use ACT button to activate LHT52 and it will auto join to the TTN V3 network. After join success, it will start to upload sensor data to TTN V3 and user can see in the panel.

195

196

197

[[image:image-20220621095134-4.png]]

== 2.4 Uplink Payload ==

202

203

204

Uplink payloads include two types: Valid Sensor Value and other status / control command.

205

206

* Valid Sensor Value: Use FPORT=2

207

* Other control command: Use FPORT other than 2.

=== 2.4.1 Uplink FPORT~=5, Device Status ===

212

213

214

Uplink the device configures with FPORT=5. Once LHT52 Joined the network, it will uplink this message to the server. After first uplink, LHT52 will uplink Device Status every 12 hours.

215

216

(% border="1" cellspacing="4" style="background-color:#ffffcc; color:green; width:370px" %)

[[image:image-20220621100550-5.png]]

221

222

Example Payload (FPort=5): [[image:image-20220621105116-11.png]]

223

224

225

(% style="color:#4472c4" %)**Sensor Model**(%%): For LHT52, this value is 0x09.

226

227

(% style="color:#4472c4" %)**Firmware Version**(%%): 0x0100, Means: v1.0.0 version.

228

229

(% style="color:#4472c4" %)**Frequency Band**:

*0x01: EU868

*0x02: US915

*0x03: IN865

*0x04: AU915

*0x05: KZ865

*0x06: RU864

*0x07: AS923

*0x08: AS923-1

*0x09: AS923-2

*0x0a: AS923-3

(% style="color:#4472c4" %)**Sub-Band**(%%): value 0x00 ~~ 0x08(only for CN470, AU915,US915. Others are0x00)

253

254

(% style="color:#4472c4" %)**BAT**(%%): shows the battery voltage for LHT52.

Ex1: 0x0B3A = 2874mV

Use can also get the Device Status uplink through the downlink command:

260

261

(% style="color:#4472c4" %)**Downlink: 0x2301**

262

263

264

[[image:image-20220621100550-6.png||height="504" width="1491"]]

=== 2.4.2 Uplink FPORT~=2, Real time sensor value ===

269

270

271

LHT52 will send this uplink after Device Status uplink once join LoRaWAN network successfully. And it will periodically send this uplink. Default interval is 20 minutes and [[can be changed>>||anchor="H3.1A0DownlinkCommandSet"]].

272

273

Uplink uses FPORT=2 and every 20 minutes send one uplink by default.

274

275

(% border="1" cellspacing="4" style="background-color:#ffffcc; color:green; width:390px" %)

276

|=(% style="width: 60px;" %)(((

277

**Size(bytes)**

278

)))|=(% style="width: 60px;" %)(((

279

**2**

280

)))|=(% style="width: 60px;" %)(((

281

**2**

282

)))|=(% style="width: 90px;" %)(((

283

**2**

284

)))|=(% style="width: 40px;" %)(((

285

**1**

286

)))|=(% style="width: 80px;" %)(((

287

**4**

288

)))

289

|(% style="width:97px" %)(((

290

**Value**

291

)))|(% style="width:39px" %)(((

292

[[Temperature>>||anchor="HTemperature26ExternalTemperature:"]]

293

)))|(% style="width:100px" %)(((

294

(((

295

[[Humidity>>||anchor="HHumidity:"]]

296

)))

297

)))|(% style="width:77px" %)(((

298

(((

299

[[External Temperature>>||anchor="HTemperature26ExternalTemperature:"]]

300

)))

301

)))|(% style="width:47px" %)(((

302

[[Ext>>||anchor="HExtension23" _msthash="1817486"]] #

303

)))|(% style="width:51px" %)(((

304

[[Unix TimeStamp>>||anchor="H2.6.1A0UnixTimeStamp"]]

)))

**Temperature:**

[[image:image-20220621101526-7.png]]

310

311

Example Payload (FPort=2): (% style="background-color:yellow" %)**08 CD 02 20 7F FF 01 61 CD 4E DD**

312

313

314

==== (% style="color:blue" %)**Temperature & External Temperature:**(%%) ====

315

316

317

* Example1: 0x08CD/100=22.53℃

318

* Example2: (0xF5C6-65536)/100=-26.18℃

319

320

==== (% style="color:blue" %)**Humidity:**(%%) ====

321

322

323

* Humidity: 0x0220/10=54.4%

324

325

==== (% style="color:blue" %)**Extension #**(%%) ====

326

327

328

Bytes for External Sensor:

329

330

(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:310px" %)

331

|=(% style="width: 103px;" %)**EXT # Value**|=(% style="width: 203px;" %)**External Sensor Probe**

332

|(% style="width:103px" %)0x01|(% style="width:203px" %)Sensor AS-01, Temperature

=== 2.4.3 Uplink FPORT~=3, Datalog sensor value ===

337

338

339

LHT52 stores sensor value and user can retrieve these history value via downlink command. The Datalog sensor value are sent via FPORT=3.

340

341

[[image:image-20220621101659-8.png||height="515" width="1381"]](% style="display:none" %)

342

343

344

* Each data entry is 11 bytes, to save airtime and battery, LHT52 will send max bytes according to the current DR and Frequency bands.(% style="display:none" %)

345

346

For example, in US915 band, the max payload for different DR is:

347

348

1. DR0: max is 11 bytes so one entry of data

349

1. DR1: max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)

350

1. DR2: total payload includes 11 entries of data

351

1. DR3: total payload includes 22 entries of data.

352

353

(% style="color:red" %)**Notice: LHT52 will save 178 set of history data, If device doesn't have any data in the polling time. Device will uplink 11 bytes of 0.**

354

355

See more info about the [[Datalog feature>>||anchor="H2.6A0DatalogFeature"]].

=== 2.4.4 Uplink FPORT~=4, DS18B20 ID ===

360

361

362

User can get external DS18B20 ID through the downlink command.

Downlink: 0x2302

[[image:image-20220621101853-9.png||height="529" width="1366"]]

367

368

Example Payload (FPort=4): (% style="color:#037691" %)**28 86 63 B2 00 00 00 9F**

369

370

The External DS18B20 ID is 0x28 86 63 B2 00 00 00 9F

=== 2.4.5 Decoder in TTN V3 ===

375

376

377

In LoRaWAN protocol, the uplink payload is HEX format, user need to add a payload formatter/decoder in LoRaWAN Server to get human friendly string.

378

379

In TTN , add formatter as below:

380

381

[[image:image-20220621102026-10.png]]

(((

Please check the decoder from this link: [[https:~~/~~/github.com/dragino/dragino-end-node-decoder>>https://github.com/dragino/dragino-end-node-decoder]]

)))

(((

)))

(% style="display:none" %) (%%)

393

394

== 2.5 Show data on Datacake ==

(((

Datacake IoT platform provides a human friendly interface to show the sensor data in charts, once we have sensor data in TTN V3, we can use Datacake to connect to TTN V3 and see the data in Datacake. Below are the steps:

)))

(((

)))

(((

(% style="color:blue" %)**Step 1**(%%): Be sure that your device is programmed and properly connected to the LoRaWAN network.

)))

(((

(% style="color:blue" %)**Step 2**(%%): Configure your Application to forward data to Datacake you will need to add integration. Go to TTN V3 Console ~-~-> Applications ~-~-> Integrations ~-~-> Add Integrations.

)))

(((

~1. Add Datacake:

)))

(((

2. Select default key as Access Key:

)))

(((

3. In Datacake console ([[https:~~/~~/datacake.co/>>url:https://datacake.co/]]) , add LHT52:

)))

(((

Please refer to the figure below

)))

[[image:image-20220621112422-1.png]]

431

432

433

Log in to DATACAKE, copy the API under the account

434

435

[[image:image-20220621112422-2.png]]

436

437

438

[[image:image-20220621112422-3.png]]

[[image:image-20220621112422-4.png||height="741" width="1237"]]

443

444

445

[[image:image-20220621112422-5.png||height="314" width="1226"]]

446

447

448

[[image:image-20220621112422-6.png]]

449

450

451

[[image:image-20220621112422-7.png]]

452

453

[[image:image-20220621112422-8.png]]

454

455

456

[[image:image-20220621112422-9.png||height="338" width="1211"]]

457

458

459

[[image:image-20220621112422-10.png||height="372" width="1215"]]

Copy and paste the [[TTN decoder>>https://www.dropbox.com/sh/6ighqpavkd33gqi/AACPu62g--x0gBADvHZs_xr6a?dl=0]] here and save

464

465

[[image:image-20220621112422-11.png||height="575" width="1215"]]

466

467

468

Visual widgets please read the DATACAKE documentation

469

470

[[image:image-20220622154805-1.png]]

== 2.6 Datalog Feature ==

475

476

477

(% _msthash="315262" _msttexthash="32283004" _mstvisible="1" %)

478

When user want to retrieve sensor value, he can send a poll command from the IoT platform to ask sensor to send value in the required time slot.

=== 2.6.1 Unix TimeStamp ===

483

484

485

Unix TimeStamp shows the sampling time of uplink payload. format base on

486

487

[[image:image-20220523001219-11.png||_mstalt="450450" _mstvisible="3" height="97" width="627"]]

488

489

User can get this time from link: [[https:~~/~~/www.epochconverter.com/>>url:https://www.epochconverter.com/||_mstvisible="3"]] :

490

491

For example: if the Unix Timestamp we got is hex 0x60137afd, we can convert it to Decimal: 1611889405. and then convert to the time: 2021 – Jan ~-~- 29 Friday 03:03:25 (GMT)

492

493

494

[[image:1655782409139-256.png]]

=== 2.6.2 Poll sensor value ===

(((

User can poll sensor value based on timestamps from the server. Below is the downlink command.

)))

(((

Timestamp start and Timestamp end use Unix TimeStamp format as mentioned above. Devices will reply with all data log during this time period, use the uplink interval.

)))

(((

For example, downlink command [[image:image-20220621113526-13.png]] (% _mstvisible="3" style="display:none" %)

)))

(((

Is to check 2020/12/1 07:40:00 to 2020/12/1 08:40:00's data

)))

(((

Uplink Internal =5s，means LHT52 will send one packet every 5s. range 5~~255s.

)))

=== 2.6.3 Datalog Uplink payload ===

524

525

526

See [[Uplink FPORT=3, Datalog sensor value>>||anchor="H2.4.3A0UplinkFPORT3D32CDatalogsensorvalue"]]

527

528

(% style="display:none" %) (%%)

529

530

(% style="display:none" %) (%%)

== 2.7 Alarm Mode ==

(((

When device is in Alarm mode, it will check the built-in sensor temperature in a short interval. If the temperature exceeds the pre-configure range, it will send an uplink immediately.

)))

(((

The alarm mode can be modified by AT command or downlink, Alarm mode is disabled by default.

)))

(((

If you need to enable the Alarm mode, please refer to the following

)))

(((

(% style="color:red" %)**Note: Alarm mode will increase the power consumption, we recommend extending the normal uplink time (20 minutes default) when enable this feature.**

)))

(((

)))

(((

(% style="color:blue" %)**AT Commands for Alarm mode:**

)))

(((

(% style="color:#037691" %)**AT+WMOD=1**(%%)**: ** Enable/Disable Alarm Mode. (0:Disable, 1: Enable),need to reset the node to take effect

)))

(((

(% style="color:#037691" %)**AT+CITEMP=1**(%%)**: ** The interval to check temperature for Alarm. (Unit: minute)

)))

(((

(% style="color:#037691" %)**AT+ARTEMP=-40,125**(%%)**: ** Set the normal temperature range from -40°C to 125°C

)))

(((

Suppose you want to set the normal temperature from 15°C to 50°C, and turn on the alarm mode, and check the temperature every 2 minutes. Please refer to the following

573

)))

574

575

[[image:image-20220621114109-14.png]]

576

577

[[image:image-20220621114109-15.png]]

(((

Modification via downlink,Take TTN_V3 as an example((% style="color:red" %)downlink commands, please refer to the downlink command set for details(%%))

)))

(((

In order to ensure that the node is indeed modified by downlink, I reset the node to factory settings first.

586

)))

587

588

[[image:image-20220621114109-16.png]]

589

590

591

[[image:image-20220621114109-17.png||height="583" width="1274"]]

592

593

[[image:image-20220621114109-18.png]]

594

595

596

Or use a downlink directly: AA010002000F0032 ([[See command info>>||anchor="H3.1A0DownlinkCommandSet"]])

597

598

[[image:image-20220621114109-19.png||height="178" width="1292"]]

== 2.8 LED Indicator ==

(((

The LHT52 has a triple color LED which for easy showing different stage.

)))

(((

(% style="color:#037691" %)**In a normal working state**:

612

)))

613

614

* When the node is restarted, (% style="color:green" %)**GREEN, **(% style="color:red" %)**RED**(%%) and (% style="color:blue" %)**BLUE**(%%)** **are sequentially lit.

615

616

* During OTAA Join:

617

** **For each Join Request uplink:** the (% style="color:green" %)**GREEN LED** (%%)will blink once.

618

** **Once Join Successful:** the (% style="color:green" %)**GREEN LED**(%%) will be solid on for 5 seconds.

619

620

* After joined, for each uplink, the (% style="color:blue" %)**BLUE LED**(%%) or (% style="color:green" %)**GREEN LED** (%%)will blink once.

621

** (% style="color:blue" %)**BLUE LED**(%%) when external sensor is connected

622

** (% style="color:green" %)**GREEN LED**(%%) when external sensor is not connected

623

624

* For each success downlink, the (% style="color:purple" %)**PURPLE LED**(%%) will blink once

625

626

(((

627

(% style="color:#037691" %)**In AT Command Mode:**

)))

(((

If user use console cable to send AT Command to LHT52, the (% style="color:red" %)**RED LED**(%%) will always on until:

)))

* Power off/on LHT52

* Press reset button of LHT52.

636

* Send an AT Command: AT+CLPM=1

637

638

(% style="display:none" %) (%%)

== 2.9 Button ==

Press the button LHT52 will reset and join network again.

= 3. Configure LHT52 via AT command or LoRaWAN downlink =

650

651

652

Use can configure LHT52 via AT Command or LoRaWAN Downlink.

653

654

* AT Command Connection: See [[FAQ>>||anchor="H6.FAQ"]].

655

656

* LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>doc:Main.WebHome]]

657

658

There are two kinds of commands to configure LHT52, they are:

659

660

* (% style="color:#4f81bd" %)**General Commands:**

661

662

These commands are to configure:

663

664

* General system settings like: uplink interval.

665

666

* LoRaWAN protocol & radio-related commands.

667

668

They are the same for all Dragino Devices which supports DLWS-005 LoRaWAN Stack(Note~*~*). These commands can be found on the wiki: [[End Device Downlink Command>>doc:Main.End Device AT Commands and Downlink Command.WebHome]]

669

670

671

* (% style="color:#4f81bd" %)**Commands special design for LHT52**

672

673

These commands are only valid for LHT52, as below:

== 3.1 Downlink Command Set ==

678

679

680

(% border="1" cellpadding="0" cellspacing="10" style="background-color:#ffffcc; color:green; width:500px" %)

681

|=(% style="width: 100px;" %)**Command Example**|=(% style="width: 150px;" %)**Function**|=(% style="width: 100px;" %)**Response**|=(% style="width: 150px;" %)**Downlink**

682

|(% style="width:161px" %)AT+TDC=?|(% style="width:138px" %)View current TDC time|(% style="width:243px" %)(((

1200000

OK

)))|(% style="width:1001px" %)Default 1200000(ms)

688

|(% style="width:161px" %)AT+TDC=300000|(% style="width:138px" %)Set TDC time|(% style="width:243px" %)OK|(% style="width:1001px" %)(((

0X0100012C:

01:fixed command

00012C:0X00012C=300(seconds)

694

)))

695

|(% style="width:161px" %)ATZ|(% style="width:138px" %)Reset node|(% style="width:243px" %) |(% style="width:1001px" %)0x04FF

696

|(% style="width:161px" %)AT+FDR|(% style="width:138px" %)Restore factory settings|(% style="width:243px" %) |(% style="width:1001px" %)0X04FE

697

|(% style="width:161px" %)AT+CFM=?|(% style="width:138px" %)View the current confirmation mode status|(% style="width:243px" %)(((

0

OK

)))|(% style="width:1001px" %)Default 0

702

|(% style="width:161px" %)AT+CFM=1|(% style="width:138px" %)Turn on confirmation mode|(% style="width:243px" %)OK|(% style="width:1001px" %)(((

0x0500:close

0x0501:open

05:fixed command

)))

|(% style="width:161px" %)AT+CHE=?|(% style="width:138px" %)View the current sub-band select 0-7, the default is 0|(% style="width:243px" %)(((

0

OK

)))|(% style="width:1001px" %)Default 0

714

|(% style="width:161px" %)AT+CHE=2|(% style="width:138px" %)(((

Set subband to 2

(CN470,US915,AU915)

)))|(% style="width:243px" %)(((

719

Attention:Take effect after ATZ

OK

)))|(% style="width:1001px" %)(((

0X0702:

07:fixed command

02:Select subband 2

)))

|(% style="width:161px" %)AT+WMOD=?|(% style="width:138px" %)View the current alarm mode status|(% style="width:243px" %)(((

0

OK

)))|(% style="width:1001px" %)Default 0

736

|(% style="width:161px" %)AT+WMOD=1|(% style="width:138px" %)Turn on alarm mode|(% style="width:243px" %)(((

737

Attention:Take effect after ATZ

OK

)))|(% style="width:1001px" %)(((

0xA501:open

0XA500:close

A5:fixed command

)))

|(% style="width:161px" %)AT+CITEMP=?|(% style="width:138px" %)View the current temperature detection time interval|(% style="width:243px" %)(((

1

OK

)))|(% style="width:1001px" %)Default 1(min)

756

|(% style="width:161px" %)AT+CITEMP=2|(% style="width:138px" %)Set the temperature detection time interval to 2min|(% style="width:243px" %)OK|(% style="width:1001px" %)(((

0XA70002

A7:fixed command

0002:0X0002=2(min)

)))

|(% style="width:161px" %)AT+NJM=?|(% style="width:138px" %)Check the current network connection method|(% style="width:243px" %)(((

1

OK

)))|(% style="width:1001px" %)Default 1

768

|(% style="width:161px" %)AT+NJM=0|(% style="width:138px" %)Change the network connection method to ABP|(% style="width:243px" %)(((

769

Attention:Take effect after ATZ

OK

)))|(% style="width:1001px" %)(((

0X2000:ABP

0x2001:OTAA

20:fixed command

)))

|(% style="width:161px" %)AT+RPL=?|(% style="width:138px" %)View current RPL settings|(% style="width:243px" %)(((

0

OK

)))|(% style="width:1001px" %)Default 0

788

|(% style="width:161px" %)AT+RPL=1|(% style="width:138px" %)set RPL=1|(% style="width:243px" %)OK|(% style="width:1001px" %)(((

0x2101:

21:fixed command

01:for details, check wiki

794

)))

795

|(% style="width:161px" %)AT+ADR=?|(% style="width:138px" %)View current ADR status|(% style="width:243px" %)(((

1

OK

)))|(% style="width:1001px" %)Default 0

800

|(% style="width:161px" %)AT+ADR=0|(% style="width:138px" %)Set the ADR state to off|(% style="width:243px" %)OK|(% style="width:1001px" %)(((

0x2200:close

0x2201:open

22:fixed command

)))

|(% style="width:161px" %)AT+DR=?|(% style="width:138px" %)View the current DR settings|(% style="width:243px" %)OK|(% style="width:1001px" %)

808

|(% style="width:161px" %)AT+DR=1|(% style="width:138px" %)(((

809

set DR to 1

810

811

It takes effect only when ADR=0

812

)))|(% style="width:243px" %)OK|(% style="width:1001px" %)(((

0X22000101:

00:ADR=0

01:DR=1

01:TXP=1

22:fixed command

)))

|(% style="width:161px" %)AT+TXP=?|(% style="width:138px" %)View the current TXP|(% style="width:243px" %)OK|(% style="width:1001px" %)

824

|(% style="width:161px" %)AT+TXP=1|(% style="width:138px" %)(((

825

set TXP to 1

826

827

It takes effect only when ADR=0

828

)))|(% style="width:243px" %)OK|(% style="width:1001px" %)(((

0X22000101:

00:ADR=0

01:DR=1

01:TXP=1

22:fixed command

)))

|(% style="width:161px" %) |(% style="width:138px" %)Upload node configuration or DS18B20 ID|(% style="width:243px" %) |(% style="width:1001px" %)(((

840

0X2301:Upload node configuration

841

842

0x2302:Upload DS18B20 ID

23:fixed command

)))

|(% style="width:161px" %)AT+DWELL=?|(% style="width:138px" %)Check the high-rate upload settings|(% style="width:243px" %)(((

1

OK

)))|(% style="width:1001px" %)Default 1

851

|(% style="width:161px" %)AT+DWELL=1|(% style="width:138px" %)(((

Set high rate upload

(AS923,AU915)

)))|(% style="width:243px" %)(((

856

Attention:Take effect after ATZ

OK

)))|(% style="width:1001px" %)(((

0x2501:close

0x2500:open

25:fixed command

for details, check wiki

869

)))

870

|(% style="width:161px" %)AT+RJTDC=?|(% style="width:138px" %)View current RJTDC set time|(% style="width:243px" %)(((

20

OK

)))|(% style="width:1001px" %)Default 20(min)

875

|(% style="width:161px" %)AT+RJTDC=10|(% style="width:138px" %)Set RJTDC time interval|(% style="width:243px" %)OK|(% style="width:1001px" %)(((

0X26000A:

26:fixed command

000A:0X000A=10(min)

for details, check wiki

883

)))

884

|(% style="width:161px" %) |(% style="width:138px" %)Retrieve stored data for a specified period of time|(% style="width:243px" %) |(% style="width:1001px" %)(((

885

0X3161DE7C7061DE8A800A:

31:fixed command

61DE7C70:0X61DE7C70=2022/1/12 15:00:00

890

891

61DE8A80:0X61DE8A80=2022/1/12 16:00:00

0A:0X0A=10(second)

View details 2.6.2

)))

|(% style="width:161px" %)AT+DDETECT=?|(% style="width:138px" %)View the current DDETECT setting status and time|(% style="width:243px" %)(((

0,1440

OK

)))|(% style="width:1001px" %)Default 0,1440(min)

902

|(% style="width:161px" %)AT+DDETECT=1,1440|(% style="width:138px" %)(((

903

Set DDETECT setting status and time

904

905

((% style="color:red" %)When the node does not receive the downlink packet within the set time, it will re-enter the network(%%))

906

)))|(% style="width:243px" %)OK|(% style="width:1001px" %)(((

0X320005A0:close

0X320105A0:open

32:fixed command

05A0:0X05A0=1440(min)

914

)))

915

|(% style="width:161px" %) |(% style="width:138px" %)(((

916

Downlink Modification Alarm Mode

917

918

(AT+WMOD,AT+CITEMP,AT+ARTEMP)

919

)))|(% style="width:243px" %) |(% style="width:1001px" %)(((

0XAA010002000F00032:

AA:fixed command

01:0X01=1(AT+MOD)

0002:0X0002=2(AT+CITEMP)

927

928

000F:0X000F=15(AT+ARTEMP)

929

930

0032:0X0032=50(AT+ARTEMP)

)))

== 3.2 Set Password ==

936

937

938

Feature: Set device password, max 9 digits.

939

940

(% style="color:#4f81bd" %)**AT Command: AT+PWORD**

941

942

[[image:image-20220523151052-5.png||_mstalt="428623" _mstvisible="3"]]

943

944

945

(% style="color:#4f81bd" %)**Downlink Command:**

946

947

No downlink command for this feature.

= 4. Battery & How to replace =

952

953

954

== 4.1 Battery Type and replace ==

955

956

957

LHT52 uses 2 x AAA LR03(1.5v) batteries. If the batteries running low (shows 2.1v in the platform). User can buy generic AAA battery and replace it.

958

959

960

(% style="color:red" %)**Note: **

961

962

1. The LHT52 doesn't have any screw, use can use nail to open it by the middle.

963

964

[[image:image-20220621143535-5.png]]

965

966

967

2. Make sure the direction is correct when install the AAA batteries.

968

969

[[image:image-20220621143535-6.png]]

== 4.2 Power Consumption Analyze ==

974

975

976

Dragino battery powered product are all runs in Low Power mode. We have an update battery calculator which base on the measurement of the real device. User can use this calculator to check the battery life and calculate the battery life if want to use different transmit interval.

977

978

Instruction to use as below:

979

980

(% style="color:blue" %)**Step 1**(%%): Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from:

981

982

[[https:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/]]

983

984

985

(% style="color:blue" %)**Step 2**(%%): (% style="display:none" %) (%%)Open it and choose

* Product Model

* Uplink Interval

* Working Mode

And the Life expectation in difference case will be shown on the right.

992

993

[[image:image-20220621143643-7.png||height="429" width="1326"]]

= 5. Sensors and Accessories =

998

999

1000

== 5.1 Temperature Probe (AS-01) ==

1001

1002

1003

External Temperature Probe base on DS18B20. (note: Default Package doesn't include AS-01)

1004

1005

[[image:image-20220621141939-4.png||height="315" width="279"]] [[image:image-20220621141546-2.png||height="308" width="205"]](% style="display:none" %)

1006

1007

1008

**External Temperature Probe (AS-01):(% style="display:none" %) (%%)**

1009

1010

* Resolution: 0.0625 °C

1011

* ±0.5°C accuracy from -10°C to +85°C

1012

* ±2°C accuracy from -55°C to +125°C

1013

* Operating Range: -55 °C ~~ 125 °C

1014

* Cable Length: 2 meters

== 5.2 Program Converter (AS-02) ==

1019

1020

1021

AS-02 is an optional accessory, it is USB Type-C converter. AS-02 provide below feature:

1022

1023

1. Access AT console of LHT52 when used with USB-TTL adapter. [[See this link>>||anchor="H6.1HowtouseATCommandtoconfigureLHT52"]].

1024

1. Update firmware to LHT52 when used with DAP-Link adapter. [[See this link>>doc:Main.Firmware Upgrade Instruction.WebHome||anchor="H2.3LHT52"]].

1025

1026

[[image:image-20220621141724-3.png]]

= 6. FAQ =

== 6.1 How to use AT Command to configure LHT52 ==

1034

1035

1036

LHT52 supports AT Command set. User can use a USB to TTL adapter plus the Program Cable to connect to LHT52 for using AT command, as below.

1037

1038

1039

[[image:image-20220621144150-8.png||height="537" width="724"]]

**Connection:**

* (% style="background-color:yellow" %)USB to TTL GND <~-~-> Program Converter GND pin

1045

* (% style="background-color:yellow" %)USB to TTL RXD <~-~-> Program Converter D+ pin

1046

* (% style="background-color:yellow" %)USB to TTL TXD <~-~-> Program Converter A11 pin

1047

1048

It is also possible to connect using DAPLink

1049

1050

[[image:image-20220621144235-9.png||height="485" width="729"]]

(((

**Connection:**

)))

* (((

(% style="background-color:yellow" %)USB to DAP-LINK GND <~-~-> Program Converter GND pin

1058

)))

1059

* (((

1060

(% style="background-color:yellow" %)USB to DAP-LINK RXD <~-~-> Program Converter D+ pin

1061

)))

1062

* (((

1063

(% style="background-color:yellow" %)USB to DAP-LINK TXD <~-~-> Program Converter A11 pin

)))

(((

In PC, User needs to set **serial tool**(such as [[putty>>url:https://www.chiark.greenend.org.uk/~~sgtatham/putty/latest.html]], SecureCRT) baud rate to (% style="color:green" %)**115200**(%%) to access to access serial console for LHT52. The AT commands are disable by default and need to enter password (default:(% style="color:green" %)**123456**(%%)) to active it. Timeout to input AT Command is 5 min, after 5-minute, user need to input password again.

)))

(((

Input password and ATZ to activate LHT52,As shown below:

)))

[[image:image-20220621144235-10.png]]

== 6.2 AT Command and Downlink ==

(((

Sending ATZ will reboot the node

)))

(((

Sending AT+FDR will restore the node to factory settings

)))

(((

Get the node's AT command setting by sending AT+CFG

)))

(((

)))

(((

**Example：**

)))

(((

AT+VER=EU868 v1.0

)))

(((

AT+NJM=1

)))

(((

AT+DEUI=25 32 12 45 65 26 12 35

)))

(((

AT+APPEUI=25 32 12 45 65 26 32 16

)))

(((

AT+APPKEY=25 32 12 45 65 26 32 16 89 48 85 65 45 87 89 55

)))

(((

AT+DADDR=00 00 00 00

)))

(((

AT+APPSKEY=00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

)))

(((

AT+NWKSKEY=00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

)))

(((

AT+NWKID=00 00 00 13

)))

(((

AT+ADR=1

)))

(((

AT+DR=5

)))

(((

AT+TXP=1

)))

(((

AT+CHS=0

)))

(((

AT+CLASS=A

)))

(((

AT+CFM=0

)))

(((

AT+JN1DL=5000

)))

(((

AT+JN2DL=6000

)))

(((

AT+RX1DL=5000

)))

(((

AT+RX2DL=6000

)))

(((

AT+RX1WTO=24

)))

(((

AT+RX2WTO=6

)))

(((

AT+RX2FQ=869525000

)))

(((

AT+RX2DR=0

)))

(((

AT+RPL=0

)))

(((

AT+FCU=6

)))

(((

AT+FCD=0

)))

(((

AT+CFS=0

)))

(((

AT+NJS=1

)))

(((

AT+DCS=0

)))

(((

AT+PNM=1

)))

(((

AT+PWORD=123456

)))

(((

AT+EXT=1

)))

(((

AT+TDC=120000

)))

(((

AT+TIMESTAMP=1640851037 2021 12 30 7 57 17

)))

(((

AT+RJTDC=20

)))

(((

AT+DDETECT=0,1440

)))

(((

AT+WMOD=0

)))

(((

AT+CITEMP=1

)))

(((

AT+ARTEMP=-40,125

)))

(((

Send AT+PDTA=? to get the stored 174 data

)))

(((

**Example：**

)))

[[image:image-20220621144804-11.png]]

== 6.3 How to upgrade the firmware? ==

1274

1275

1276

LHT52 requires a program converter to upload images to LHT52, which is used to upload image to LHT52 for:

1277

1278

* Support new features

1279

* For bug fix

1280

* Change LoRaWAN bands.

1281

1282

(((

1283

User can check this link for the detail of operation of firmware upgrade: [[Firmware Upgrade Instruction>>doc:Main.Firmware Upgrade Instruction.WebHome||anchor="H2.3LHT52"]]

)))

== 6.4 How to change the LoRa Frequency Bands/Region? ==

1289

1290

1291

User can follow the introduction for [[how to upgrade image>>||anchor="H6.3A0Howtoupgradethefirmware3F"]]. When download the images, choose the required image file for download.

= 7. Order Info =

== 7.1 Main Device ==

(((

Part Number: (% style="color:#4472c4" %)**LHT65N-XX**

)))

(((

(% style="color:#4472c4" %)**XX **(%%): The default frequency band

1307

)))

1308

1309

* (% style="color:red" %)**AS923**(%%)**: **LoRaWAN AS923 band

1310

* (% style="color:red" %)**AU915**(%%)**: **LoRaWAN AU915 band

1311

* (% style="color:red" %)**EU433**(%%)**: **LoRaWAN EU433 band

1312

* (% style="color:red" %)**EU868**(%%)**:** LoRaWAN EU868 band

1313

* (% style="color:red" %)**KR920**(%%)**: **LoRaWAN KR920 band

1314

* (% style="color:red" %)**US915**(%%)**: **LoRaWAN US915 band

1315

* (% style="color:red" %)**IN865**(%%)**: **LoRaWAN IN865 band

1316

* (% style="color:red" %)**CN470**(%%)**: **LoRaWAN CN470 band

== 7.2 Accessories ==

1321

1322

1323

(% style="color:red" %)**Note: below accessories are not include in the main device package, need to order separately.**

1324

1325

**Temperature Probe: (% style="color:red" %)AS-01(%%)**

1326

1327

**Program Converter: (% style="color:red" %)AS-02(%%)**

= 8. Packing Info =

**Package Includes**:

1335

1336

* LHT52 Temperature & Humidity Sensor x 1

= 9. Support =

* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.

1344

* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:file:///D:/市场资料/说明书/LoRa/LT系列/support@dragino.com]].

= 10. Reference material =

1349

1350

1351

* [[Datasheet, photos, decoder, firmware>>https://www.dropbox.com/sh/ucgxio6zltajlxg/AACxr_XyH4Cy7gevG293k4zqa?dl=0]]

1352

1353

1354