LSPH01-LoRaWAN Soil pH Sensor User Manual

The Dragino LSPH01 is a (% style="color:#4f81bd" %)**LoRaWAN Soil pH Sensor**(%%) for IoT of Agriculture. It is designed to measure the soil PH and soil temperature, so to send to the platform to analyze the soil acid or alkali level. The probe is IP68 waterproof.

28

29

LSPH01 probe is made by Solid AgCl reference electrode and Pure metal pH sensitive electrode. It can detect soil's** (% style="color:#4f81bd" %)pH (%%)**with high accuracy and stable value. The LSPH01 probe can be buried into soil for long time use.

30

31

The LoRa wireless technology used in LSPH01 allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.

32

33

LSPH01 is powered by (% style="color:#4f81bd" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.

34

35

Each LSPH01 is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.

36

37

38

[[image:1654580186518-415.png]]

== 1.2 Features ==

* LoRaWAN 1.0.3 Class A

45

* Ultra-low power consumption

46

* Monitor soil pH with temperature compensation.

47

* Monitor soil temperature

48

* Monitor Battery Level

49

* Support pH calibration by end user

50

* Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865

51

* AT Commands to change parameters

52

* Uplink on periodically

53

* Downlink to change configure

54

* IP66 Waterproof Enclosure

55

* IP68 rate for the Sensor Probe

56

* 8500mAh Battery for long term use

== 1.3 Probe Specification ==

61

62

63

(% style="color:#4f81bd" %)**Soil pH:**

64

65

* Range: 3 ~~ 10 pH

66

* Resolution: 0.01 pH

67

* Accuracy: ±2% under (0~~50 ℃, Accuracy will poor under 0 due to frozen)

68

* Temperature Compensation Range: 0 ~~ 50℃

* IP68 Protection

* Length: 3.5 meters

(% style="color:#4f81bd" %)**Soil Temperature:**

* Range -40℃～85℃

* Resolution: 0.1℃

* Accuracy: <±0.5℃(-10℃～40℃)，<±0.8℃ (others)

* IP68 Protection

* Length: 3.5 meters

== 1.4 Applications ==

* Smart Agriculture

== 1.5 Pin mapping and power on ==

89

90

[[image:1654580482666-473.png]]

= 2. Configure LSPH01 to connect to LoRaWAN network =

95

96

== 2.1 How it works ==

97

98

(((

99

The LSPH01 is configured as LoRaWAN OTAA Class A mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and power on the LSPH01. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.

)))

(((

In case you can’t set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>||anchor="H5.UseATCommand"]]to set the keys in the LSPH01.

)))

== 2.2 Quick guide to connect to LoRaWAN server (OTAA) ==

108

109

(((

110

Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LG308>>url:http://www.dragino.com/products/lora/item/140-lg308.html]] as a LoRaWAN gateway in this example.

)))

(((

)))

(((

The LG308 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.

)))

(((

(% style="color:blue" %)**Step 1**(%%): Create a device in TTN with the OTAA keys from LSPH01.

)))

(((

Each LSPH01 is shipped with a sticker with the default device EUI as below:

)))

[[image:image-20220607135531-1.jpeg]]

131

132

133

You can enter this key in the LoRaWAN Server portal. Below is TTN screen shot:

134

135

136

**Register the device**

137

138

[[image:1654581442672-605.png]]

**Add APP EUI and DEV EUI**

143

144

[[image:1654581465717-368.png]]

**Add APP EUI in the application**

149

150

[[image:1654581493871-516.png]]

**Add APP KEY**

[[image:1654581517630-991.png]]

157

158

159

(% style="color:blue" %)**Step 2**(%%): Power on LSPH01

160

161

162

Put a Jumper on JP2 to power on the device. ( The Switch must be in FLASH position).

163

164

[[image:image-20220607135918-2.png]]

165

166

167

(% style="color:blue" %)**Step 3**(%%)**:** The LSPH01 will auto join to the TTN network. After join success, it will start to upload messages to TTN and you can see the messages in the panel.

168

169

[[image:1654581590132-631.png]]

== 2.3 Uplink Payload ==

174

175

LSPH01 will uplink payload via LoRaWAN with below payload format:

176

177

Uplink payload includes in total 11 bytes.

178

179

Normal uplink payload:

180

181

(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)

|(((

**Size**

**(bytes)**

)))|**2**|**2**|**2**|**2**|**1**|**1**|**1**

187

|**Value**|[[BAT>>||anchor="H2.3.1BatteryInfo"]]|(((

188

[[Temperature>>||anchor="H2.3.2DS18B20Temperaturesensor"]]

189

190

[[(Optional)>>||anchor="H2.3.2DS18B20Temperaturesensor"]]

191

)))|[[Soil pH>>||anchor="H2.3.3SoilpH"]]|[[Soil Temperature>>||anchor="H2.3.4SoilTemperature"]]|(((

192

[[Digital Interrupt (Optional)>>||anchor="H2.3.5InterruptPin"]]

193

)))|Reserve|(((

194

[[Message Type>>||anchor="H2.3.6MessageType"]]

195

)))

196

197

[[image:1654581735133-458.png]]

=== 2.3.1 Battery Info ===

202

203

204

Check the battery voltage for LSPH01.

Ex1: 0x0B45 = 2885mV

Ex2: 0x0B49 = 2889mV

=== 2.3.2 DS18B20 Temperature sensor ===

213

214

This is optional, user can connect external DS18B20 sensor to the +3.3v, 1-wire and GND pin . and this field will report temperature.

**Example**:

If payload is: 0105H: (0105 & FC00 == 0), temp = 0105H /10 = 26.1 degree

220

221

If payload is: FF3FH : (FF3F & FC00 == 1) , temp = (FF3FH - 65536)/10 = -19.3 degrees.

=== 2.3.3 Soil pH ===

Range: 0 ~~ 14 pH

**Example:**

(% style="color:#037691" %)** 0x02B7(H) = 695(D) = 6.95pH**

=== 2.3.4 Soil Temperature ===

Get Soil Temperature

**Example**:

If payload is: **0105H**: (0105 & FC00 == 0), temp = 0105H /10 = 26.1 degree

243

244

If payload is: **FF3FH** : (FF3F & FC00 == 1) , temp = (FF3FH - 65536)/10 = -19.3 degrees.

=== 2.3.5 Interrupt Pin ===

249

250

This data field shows if this packet is generated by interrupt or not. [[Click here>>||anchor="H3.2SetInterruptMode"]] for the hardware and software set up.

**Example:**

0x00: Normal uplink packet.

256

257

0x01: Interrupt Uplink Packet.

=== 2.3.6 Message Type ===

262

263

For a normal uplink payload, the message type is always 0x01.

Valid Message Type:

(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)

269

|**Message Type Code**|**Description**|**Payload**

270

|0x01|Normal Uplink|[[Normal Uplink Payload>>||anchor="H2.3200BUplinkPayload"]]

271

|0x02|Reply configures info|[[Configure Info Payload>>||anchor="H3.4GetFirmwareVersionInfo"]]

272

|0x03|Reply Calibration Info|[[Calibration Payload>>||anchor="H2.7Calibration"]]

273

274

=== 2.3.7 Decode payload in The Things Network ===

275

276

While using TTN network, you can add the payload format to decode the payload.

277

278

279

[[image:1654582541848-906.png]]

280

281

(((

282

The payload decoder function for TTN is here:

)))

(((

LSPH01 TTN Payload Decoder: [[https:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/LSPH01/Decoder/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSNPK01/Decoder/]]

)))

== 2.4 Uplink Interval ==

292

293

The LSPH01 by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>doc:Main.End Device AT Commands and Downlink Command.WebHome||anchor="H4.1ChangeUplinkInterval"]]

== 2.5 Show Data in DataCake IoT Server ==

298

299

[[DATACAKE>>url:https://datacake.co/]] provides a human friendly interface to show the sensor data, once we have data in TTN, we can use [[DATACAKE>>url:https://datacake.co/]] to connect to TTN and see the data in DATACAKE. Below are the steps:

300

301

302

(% style="color:blue" %)**Step 1**(%%)**: Be sure that your device is programmed and properly connected to the network at this time.**

303

304

(% style="color:blue" %)**Step 2**(%%)**: To configure the Application to forward data to DATACAKE you will need to add integration. To add the DATACAKE integration, perform the following steps:**

305

306

307

[[image:1654583683416-869.png]]

308

309

310

[[image:1654583694084-878.png]]

311

312

313

(% style="color:blue" %)**Step 3**(%%)**: Create an account or log in Datacake.**

314

315

(% style="color:blue" %)**Step 4**(%%)**: Create LSPH01 product.**

316

317

[[image:1654583711590-413.png]]

[[image:1654583732798-193.png]]

322

323

324

[[image:1654583749683-259.png]]

325

326

327

(% style="color:blue" %)**Step 5**(%%)**: add payload decode**

328

329

Download Datacake decoder from: [[https:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/LSPH01/Decoder/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSNPK01/Decoder/]]

330

331

332

[[image:1654583770974-935.png]]

333

334

[[image:1654583781517-146.png]]

335

336

337

[[image:1654583791351-557.png]]

338

339

340

After added, the sensor data arrive TTN, it will also arrive and show in Mydevices.

341

342

343

[[image:1654583805491-713.png]]

== 2.6 Installation and Maintain ==

348

349

=== 2.6.1 Before measurement ===

350

351

(((

352

If the LSPH01 has more than 7 days not use or just clean the pH probe. User should put the probe inside pure water for more than 24 hours for activation. If no put in water, user need to put inside soil for more than 24 hours to ensure the measurement accuracy.

)))

=== 2.6.2 Measurement ===

358

359

360

(% style="color:#4f81bd" %)**Measurement the soil surface:**

361

362

[[image:1654584128046-287.png]]

363

364

Choose the proper measuring position. Split the surface soil according to the measured deep.

365

366

Put pure water, or rainwater to make the soil of measurement point to moist mud. Remove rocks or hard things.

367

368

Slowly insert the probe to the measure point. Don’t use large force which will break the probe. Make sure not shake when inserting.

369

370

Put soil over the probe after insert. And start to measure.

371

372

373

(% style="color:#4f81bd" %)**Measurement inside soil:**

374

375

Dig a hole with diameter > 20CM.

376

377

Insert the probe inside, method like measure the surface.

=== 2.6.3 Maintain Probe ===

382

383

1. (((

384

pH probe electrode is fragile and no strong. User must avoid strong force or hitting it.

385

)))

386

1. (((

387

After long time use (3~~ 6 months). The probe electrode needs to be clean; user can use high grade sandpaper to polish it or put in 5% hydrochloric acid for several minutes. After the metal probe looks like new, user can use pure water to wash it.

388

)))

389

1. (((

390

Probe reference electrode is also no strong, need to avoid strong force or hitting.

391

)))

392

1. (((

393

User should keep reference electrode wet while not use.

394

)))

395

1. (((

396

Avoid the probes to touch oily matter. Which will cause issue in accuracy.

397

)))

398

1. (((

399

The probe is IP68 can be put in water.

)))

== 2.7 Calibration ==

406

407

User can do calibration for the probe. It is limited to use below pH buffer solution to calibrate: 4.00, 6.86, 9.18. When calibration, user need to clean the electrode and put the probe in the pH buffer solution to wait the value stable ( a new clean electrode might need max 24 hours to be stable).

408

409

After stable, user can use below command to calibrate.

410

411

[[image:image-20220607144936-3.png]]

412

413

414

(% style="color:#037691" %)**Calibration Payload**

415

416

(% border="1" cellspacing="10" style="background-color:#ffffcc; width:510px" %)

|(((

**Size**

**(bytes)**

)))|**1**|**1**|**1**|**7**|**1**

|**Value**|(((

PH4

Calibrate value

)))|PH6.86 Calibrate value|(((

PH9.18

Calibrate value

)))|Reserve|(((

[[Message Type>>||anchor="H2.3.6MessageType"]]

Always 0x03

)))

User can also send 0x14 downlink command to poll the current calibration payload.

437

438

[[image:image-20220607145603-4.png]]

439

440

* Reply to the confirmation package: 14 01

441

* Reply to non-confirmed packet: 14 00

== 2.8 Frequency Plans ==

446

447

(((

448

The LSPH01 uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.

)))

=== 2.8.1 EU863-870 (EU868) ===

453

454

(% style="color:blue" %)**Uplink:**

455

456

868.1 - SF7BW125 to SF12BW125

457

458

868.3 - SF7BW125 to SF12BW125 and SF7BW250

459

460

868.5 - SF7BW125 to SF12BW125

461

462

867.1 - SF7BW125 to SF12BW125

463

464

867.3 - SF7BW125 to SF12BW125

465

466

867.5 - SF7BW125 to SF12BW125

467

468

867.7 - SF7BW125 to SF12BW125

469

470

867.9 - SF7BW125 to SF12BW125

868.8 - FSK

(% style="color:blue" %)**Downlink:**

476

477

Uplink channels 1-9 (RX1)

478

479

869.525 - SF9BW125 (RX2 downlink only)

=== 2.8.2 US902-928(US915) ===

484

485

(((

486

Used in USA, Canada and South America. Frequency band as per definition in LoRaWAN 1.0.3 Regional document.

)))

(((

To make sure the end node supports all sub band by default. In the OTAA Join process, the end node will use frequency 1 from sub-band1, then frequency 1 from sub-band2, then frequency 1 from sub-band3, etc to process the OTAA join.

)))

(((

After Join success, the end node will switch to the correct sub band by:

495

)))

496

497

* Check what sub-band the LoRaWAN server ask from the OTAA Join Accept message and switch to that sub-band

498

* Use the Join successful sub-band if the server doesn’t include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)

=== 2.8.3 CN470-510 (CN470) ===

503

504

Used in China, Default use CHE=1

505

506

(% style="color:blue" %)**Uplink:**

507

508

486.3 - SF7BW125 to SF12BW125

509

510

486.5 - SF7BW125 to SF12BW125

511

512

486.7 - SF7BW125 to SF12BW125

513

514

486.9 - SF7BW125 to SF12BW125

515

516

487.1 - SF7BW125 to SF12BW125

517

518

487.3 - SF7BW125 to SF12BW125

519

520

487.5 - SF7BW125 to SF12BW125

521

522

487.7 - SF7BW125 to SF12BW125

523

524

525

(% style="color:blue" %)**Downlink:**

526

527

506.7 - SF7BW125 to SF12BW125

528

529

506.9 - SF7BW125 to SF12BW125

530

531

507.1 - SF7BW125 to SF12BW125

532

533

507.3 - SF7BW125 to SF12BW125

534

535

507.5 - SF7BW125 to SF12BW125

536

537

507.7 - SF7BW125 to SF12BW125

538

539

507.9 - SF7BW125 to SF12BW125

540

541

508.1 - SF7BW125 to SF12BW125

542

543

505.3 - SF12BW125 (RX2 downlink only)

=== 2.8.4 AU915-928(AU915) ===

548

549

(((

550

Frequency band as per definition in LoRaWAN 1.0.3 Regional document.

)))

(((

To make sure the end node supports all sub band by default. In the OTAA Join process, the end node will use frequency 1 from sub-band1, then frequency 1 from sub-band2, then frequency 1 from sub-band3, etc to process the OTAA join.

)))

(((

)))

(((

After Join success, the end node will switch to the correct sub band by:

563

)))

564

565

* Check what sub-band the LoRaWAN server ask from the OTAA Join Accept message and switch to that sub-band

566

* Use the Join successful sub-band if the server doesn’t include sub-band info in the OTAA Join Accept message ( TTN v2 doesn't include)

=== 2.8.5 AS920-923 & AS923-925 (AS923) ===

571

572

(% style="color:blue" %)**Default Uplink channel:**

573

574

923.2 - SF7BW125 to SF10BW125

575

576

923.4 - SF7BW125 to SF10BW125

577

578

579

(% style="color:blue" %)**Additional Uplink Channel**:

580

581

(OTAA mode, channel added by JoinAccept message)

582

583

584

(% style="color:blue" %)**AS920~~AS923 for Japan, Malaysia, Singapore**:

585

586

922.2 - SF7BW125 to SF10BW125

587

588

922.4 - SF7BW125 to SF10BW125

589

590

922.6 - SF7BW125 to SF10BW125

591

592

922.8 - SF7BW125 to SF10BW125

593

594

923.0 - SF7BW125 to SF10BW125

595

596

922.0 - SF7BW125 to SF10BW125

597

598

599

(% style="color:blue" %)**AS923 ~~ AS925 for Brunei, Cambodia, Hong Kong, Indonesia, Laos, Taiwan, Thailand, Vietnam**:

600

601

923.6 - SF7BW125 to SF10BW125

602

603

923.8 - SF7BW125 to SF10BW125

604

605

924.0 - SF7BW125 to SF10BW125

606

607

924.2 - SF7BW125 to SF10BW125

608

609

924.4 - SF7BW125 to SF10BW125

610

611

924.6 - SF7BW125 to SF10BW125

612

613

614

(% style="color:blue" %)**Downlink:**

615

616

Uplink channels 1-8 (RX1)

617

618

923.2 - SF10BW125 (RX2)

=== 2.8.6 KR920-923 (KR920) ===

623

624

(% style="color:blue" %)**Default channel:**

625

626

922.1 - SF7BW125 to SF12BW125

627

628

922.3 - SF7BW125 to SF12BW125

629

630

922.5 - SF7BW125 to SF12BW125

631

632

633

(% style="color:blue" %)**Uplink: (OTAA mode, channel added by JoinAccept message)**

634

635

922.1 - SF7BW125 to SF12BW125

636

637

922.3 - SF7BW125 to SF12BW125

638

639

922.5 - SF7BW125 to SF12BW125

640

641

922.7 - SF7BW125 to SF12BW125

642

643

922.9 - SF7BW125 to SF12BW125

644

645

923.1 - SF7BW125 to SF12BW125

646

647

923.3 - SF7BW125 to SF12BW125

648

649

650

(% style="color:blue" %)**Downlink:**

651

652

Uplink channels 1-7(RX1)

653

654

921.9 - SF12BW125 (RX2 downlink only; SF12BW125 might be changed to SF9BW125)

=== 2.8.7 IN865-867 (IN865) ===

659

660

(% style="color:blue" %)**Uplink:**

661

662

865.0625 - SF7BW125 to SF12BW125

663

664

865.4025 - SF7BW125 to SF12BW125

665

666

865.9850 - SF7BW125 to SF12BW125

667

668

669

(% style="color:blue" %)**Downlink:**

670

671

Uplink channels 1-3 (RX1)

672

673

866.550 - SF10BW125 (RX2)

== 2.9 LED Indicator ==

678

679

The LSPH01 has an internal LED which is to show the status of different state.

680

681

* The sensor is detected when the device is turned on, and it will flash 4 times quickly when it is detected.

682

* Blink once when device transmit a packet.

== 2.10 Firmware Change Log ==

687

688

689

**Firmware download link:**

690

691

[[http:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/LSPH01/Firmware/>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSE01/Firmware/]]

692

693

694

**Firmware Upgrade Method: **[[Firmware Upgrade Instruction>>doc:Main.Firmware Upgrade Instruction for STM32 base products.WebHome]]

= 3. Configure LSPH01 via AT Command or LoRaWAN Downlink =

699

700

Use can configure LSPH01 via AT Command or LoRaWAN Downlink.

701

702

* AT Command Connection: See [[FAQ>>||anchor="H6.FAQ"]].

703

* LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>doc:Main.WebHome]]

704

705

There are two kinds of commands to configure LSPH01, they are:

706

707

* (% style="color:#4f81bd" %)** General Commands**.

708

709

These commands are to configure:

710

711

* General system settings like: uplink interval.

712

* LoRaWAN protocol & radio related command.

713

714

They are same for all Dragino Device which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki:[[End Device AT Commands and Downlink Command>>doc:Main.End Device AT Commands and Downlink Command.WebHome]]

715

716

717

* (% style="color:#4f81bd" %)** Commands special design for LSPH01**

718

719

These commands only valid for LSPH01, as below:

== 3.1 Set Transmit Interval Time ==

724

725

Feature: Change LoRaWAN End Node Transmit Interval.

726

727

(% style="color:#037691" %)**AT Command: AT+TDC**

728

729

730

(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:710px" %)

731

|(% style="width:154px" %)**Command Example**|(% style="width:223px" %)**Function**|(% style="width:330px" %)**Response**

732

|(% style="width:154px" %)AT+TDC=?|(% style="width:223px" %)Show current transmit Interval|(% style="width:330px" %)(((

30000

OK

the interval is 30000ms = 30s

738

)))

739

|(% style="width:154px" %)AT+TDC=60000|(% style="width:223px" %)Set Transmit Interval|(% style="width:330px" %)(((

740

OK

741

742

Set transmit interval to 60000ms = 60 seconds

743

)))

744

745

(% style="color:#037691" %)**Downlink Command: 0x01**

746

747

Format: Command Code (0x01) followed by 3 bytes time value.

748

749

If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.

750

751

* Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds

752

* Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds

== 3.2 Set Interrupt Mode ==

757

758

Feature, Set Interrupt mode for GPIO_EXIT.

759

760

(% style="color:#037691" %)**AT Command: AT+INTMOD**

761

762

[[image:image-20220607153759-6.png]]

763

764

765

(% style="color:#037691" %)**Downlink Command: 0x06**

766

767

Format: Command Code (0x06) followed by 3 bytes.

768

769

This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.

770

771

* Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode

772

* Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger

== 3.3 Calibrate Sensor ==

777

778

Detail See [[Calibration Guide>>||anchor="H2.7Calibration"]] for the user of 0x13 and 0x14 downlink commands

== 3.4 Get Firmware Version Info ==

783

784

Feature: use downlink to get firmware version.

785

786

(% style="color:#037691" %)**Downlink Command: 0x26**

787

788

[[image:image-20220607154718-7.png]]

789

790

* Reply to the confirmation package: 26 01

791

* Reply to non-confirmed packet: 26 00

792

793

Device will send an uplink after got this downlink command. With below payload:

794

795

Configures info payload:

796

797

(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:510px" %)

798

|=(((

799

**Size(bytes)**

800

)))|=**1**|=**1**|=**1**|=**1**|=**1**|=**5**|=**1**

801

|**Value**|Software Type|(((

Frequency

Band

)))|Sub-band|(((

Firmware

Version

)))|Sensor Type|Reserve|(((

810

[[Message Type>>||anchor="H2.3.6MessageType"]]

Always 0x02

)))

**Software Type**: Always 0x03 for LSPH01

**Frequency Band**:

*0x01: EU868

*0x02: US915

*0x03: IN865

*0x04: AU915

*0x05: KZ865

*0x06: RU864

*0x07: AS923

*0x08: AS923-1

*0x09: AS923-2

*0xa0: AS923-3

**Sub-Band**: value 0x00 ~~ 0x08

841

842

843

**Firmware Version**: 0x0100, Means: v1.0.0 version

**Sensor Type**:

0x01: LSE01

0x02: LDDS75

0x03: LDDS20

0x04: LLMS01

0x05: LSPH01

0x06: LSNPK01

0x07: LDDS12

= 4. Battery & How to replace =

865

866

== 4.1 Battery Type ==

867

868

(((

869

LSPH01 is equipped with a [[8500mAH ER26500 Li-SOCI2 battery>>url:https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]. The battery is un-rechargeable battery with low discharge rate targeting for 8~~10 years use. This type of battery is commonly used in IoT target for long-term running, such as water meter.

)))

(((

The discharge curve is not linear so can’t simply use percentage to show the battery level. Below is the battery performance.

874

)))

875

876

[[image:1654588469844-778.png]]

877

878

879

Minimum Working Voltage for the LSPH01:

880

881

LSPH01: 2.45v ~~ 3.6v

== 4.2 Replace Battery ==

886

887

(((

888

Any battery with range 2.45 ~~ 3.6v can be a replacement. We recommend to use Li-SOCl2 Battery.

)))

(((

And make sure the positive and negative pins match.

)))

== 4.3 Power Consumption Analyze ==

898

899

(((

900

Dragino Battery powered product are all runs in Low Power mode. We have an update battery calculator which base on the measurement of the real device. User can use this calculator to check the battery life and calculate the battery life if want to use different transmit interval.

)))

(((

Instruction to use as below:

)))

**Step 1**: Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from:

909

910

[[https:~~/~~/www.dragino.com/downloads/index.pHp?dir=LoRa_End_Node/Battery_Analyze/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/]]

911

912

913

**Step 2**: Open it and choose

* Product Model

* Uplink Interval

* Working Mode

And the Life expectation in difference case will be shown on the right.

920

921

[[image:1654588577573-122.png]]

922

923

924

The battery related documents as below:

925

926

* (((

927

[[Battery Dimension>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/&file=LSN50-Battery-Dimension.pdf]],

928

)))

929

* (((

930

[[Lithium-Thionyl Chloride Battery datasheet>>url:https://www.dragino.com/downloads/downloads/datasheet/Battery/ER26500/ER26500_Datasheet-EN.pdf]],

931

)))

932

* (((

933

[[Lithium-ion Battery-Capacitor datasheet>>url:http://www.dragino.com/downloads/downloads/datasheet/Battery/SPC_1520_datasheet.jpg]], [[Tech Spec>>url:http://www.dragino.com/downloads/downloads/datasheet/Battery/SPC1520%20Technical%20Specification20171123.pdf]]

934

)))

935

936

[[image:image-20220607155856-8.png]]

=== 4.3.1 Battery Note ===

941

942

(((

943

The Li-SICO battery is designed for small current / long period application. It is not good to use a high current, short period transmit method. The recommended minimum period for use of this battery is 5 minutes. If you use a shorter period time to transmit LoRa, then the battery life may be decreased.

)))

=== 4.3.2 Replace the battery ===

949

950

You can change the battery in the LSPH01.The type of battery is not limited as long as the output is between 3v to 3.6v. On the main board, there is a diode (D1) between the battery and the main circuit. If you need to use a battery with less than 3.3v, please remove the D1 and shortcut the two pads of it so there won’t be voltage drop between battery and main board.

951

952

The default battery pack of LSPH01 includes a ER26500 plus super capacitor. If user can’t find this pack locally, they can find ER26500 or equivalence, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes)

= 5. Use AT Command =

957

958

== 5.1 Access AT Commands ==

959

960

LSPH01 supports AT Command set in the stock firmware. You can use a USB to TTL adapter to connect to LSPH01 for using AT command, as below.

961

962

[[image:1654589001411-343.png]]

**Connection:**

(% style="background-color:yellow" %)** USB TTL GND <~-~-~-~-> GND**

967

968

(% style="background-color:yellow" %)** USB TTL TXD <~-~-~-~-> UART_RXD**

969

970

(% style="background-color:yellow" %)** USB TTL RXD <~-~-~-~-> UART_TXD**

971

972

973

In the PC, you need to set the serial baud rate to (% style="color:green" %)**9600**(%%) to access the serial console for LSPH01. LSPH01 will output system info once power on as below:

974

975

976

[[image:1654589062541-567.png]]

977

978

Valid AT Command please check [[Configure Device>>||anchor="H3.ConfigureLSPH01viaATCommandorLoRaWANDownlink"]].

= 6. FAQ =

== 6.1 How to change the LoRa Frequency Bands/Region ==

985

986

You can follow the instructions for [[how to upgrade image>>||anchor="H2.10200BFirmwareChangeLog"]].

987

When downloading the images, choose the required image file for download.

= 7. Trouble Shooting =

992

993

== 7.1 AT Commands input doesn’t work ==

994

995

In the case if user can see the console output but can’t type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn’t send (% style="color:green" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.

= 8. Order Info =

Part Number: (% style="color:blue" %)**LSPH01-XX**

1002

1003

1004

(% style="color:blue" %)**XX**(%%): The default frequency band

1005

1006

* (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band

1007

* (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band

1008

* (% style="color:red" %)**EU433**(%%): LoRaWAN EU433 band

1009

* (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band

1010

* (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band

1011

* (% style="color:red" %)**US915**(%%): LoRaWAN US915 band

1012

* (% style="color:red" %)**IN865**(%%): LoRaWAN IN865 band

1013

* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band

= 9. Packing Info =

**Package Includes**:

1021

1022

* LSPH01 LoRaWAN Soil Ph Sensor x 1

1023

1024

**Dimension and weight**:

* Device Size: cm

* Device Weight: g

* Package Size / pcs : cm

* Weight / pcs : g

= 10. Support =

* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.

1036

* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]].

1037

1038

Wiki source code of LSPH01-LoRaWAN Soil pH Sensor User Manual

Applications

Navigation