Version 66.1 by Kilight Cao on 2022/11/04 10:29
Show last authors
1 (% style="text-align:center" %)
2 [[image:image-20221028134937-1.jpeg||height="466" width="466"]]
3
4 (((
5
6
7
8 )))
9
10 **Table of Contents：**
11
12 {{toc/}}
13
14 = **1. Introduction** =
15
16
17 == **1.1 What is LG01-V2** ==
18
19
20 (((
21 (((
22 The LG01-V2 is an (% style="color:green" %)**open-source single channel LoRa Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
23 )))
24
25 (((
26 LG01-V2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
27 )))
28
29
30
31 == **1.2 Specifications** ==
32
33
34 (% style="color:#037691" %)**Hardware System:**
35
36 * CPU: Quad-core Cortex-A7 1.2Ghz
37 * RAM: 512MB
38 * eMMC: 4GB
39
40 (% style="color:#037691" %)**Interface:**
41
42 * 10M/100M RJ45 Ports x 1
43 * WiFi 802.11 b/g/n
44
45 (% style="color:#037691" %)**Operating Condition:**
46
47 * Work Temperature: -20 ~~ 65°C
48 * Storage Temperature: -20 ~~ 65°C
49 * Power Input: 5V, 2A, DC
50
51 == **1.3 Features** ==
52
53
54 * Open Source Debian system
55 * Managed by Web GUI, SSH via WAN or WiFi
56 * Remote Management
57 * Auto-provisioning for batch deployment and management
58 * LoRa Gateway
59 * Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
60 * Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
61
62 == **1.4 Block Diagram** ==
63
64
65
66 == **1.5 LED Indicators** ==
67
68
69 LG01-V2 has totally four LEDs, They are:
70
71
72 (% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
73
74 (% style="color:blue" %)//**➢ ETH LED**//(%%)//:  This RGB LED will blink GREEN when the ETH port is connecting//
75
76 (% style="color:blue" %)//**➢ SYS LED**//(%%)//:  This RGB LED will show different colors in different states~://
77
78 // ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
79
80 // ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
81
82 // ✓** SOLID RED:** Device doesn't have an Internet connection.//
83
84 (% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
85
86
87
88 == **1.6 Button Intruction** ==
89
90
91 LG01-V2 has a black toggle button, which is:
92
93
94 (% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
95
96 // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
97
98
99 (% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
100
101 //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
102
103
104
105 = **2. Quick Start** =
106
107
108 The LG01-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
109
110 In most cases, the first thing you need to do is make the LG01-v2 accessible to the network.
111
112
113 == **2.1 Connects to the network and accesses the gateway Web UI** ==
114
115
116 == **2.1.1 connect the network.** ==
117
118
119 === (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
120
121
122 Connect the LG01-V2 Ethernet port to your router and LG01-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LG01-V2.
123
124 You can also use this IP to connect.
125
126
127 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622100129-1.png?width=1263&height=332&rev=1.1||alt="image-20220622100129-1.png"]]
128
129
130 === (% style="color:blue" %)**Method 2**(%%):  Connect via WiFi with DHCP IP from the router ===
131
132
133 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622100542-2.png?width=1256&height=369&rev=1.1||alt="image-20220622100542-2.png"]]
134
135 The LG01-V2 has a fall-back IP address on its WAN port. you have to access the gateway Web-UI to configure the WiFi connection via the fallback IP address.
136
137
138 (% style="color:#037691" %)**Steps to connect via fallback IP:**
139
140 ~1. Connect PC's Ethernet port to LG01-V2's WAN port
141
142 2. Configure PC's Ethernet port has  IP: 172.31.255.253 and Netmask: 255.255.255.252
143
144
145 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622101433-4.png?rev=1.1||alt="image-20220622101433-4.png"]]
146
147
148 and then On the PC, use the IP address **http:~/~/172.31.255.254** to access the LG01-V2 via Web or Console.
149
150
151 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102210-5.png?width=919&height=504&rev=1.1||alt="image-20220622102210-5.png"]]
152
153
154 Fill in the WiFi information by checking the box and clicking (% style="color:red" %)**Save&Apply**
155
156
157 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102702-6.png?rev=1.1||alt="image-20220622102702-6.png"]]
158
159
160 **Wi-Fi configuration successful**
161
162
163 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102847-7.png?rev=1.1||alt="image-20220622102847-7.png"]]
164
165 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?width=938&height=476&rev=1.1||alt="image-20220622102901-8.png"]]
166
167
168 = **3. Web Configure Pages** =
169
170 == **3.1 Home** ==
171
172 //Shows the system running status~://
173
174 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
175
176
177 == **3.2 Network Settings** ==
178
179
180 === **3.2.1 Network ~-~-> WiFi** ===
181
182
183 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220616114756-4.png?width=669&height=251&rev=1.1||alt="image-20220616114756-4.png"]]
184
185
186
187 === **3.4.2 Network ~-~-> System Status** ===
188
189
190 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220820134112-2.png?width=668&height=539&rev=1.1||alt="image-20220820134112-2.png"]]
191
192
193
194 === **3.4.3 Network ~-~-> Firewall** ===
195
196
197 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220616115351-6.png?width=661&height=244&rev=1.1||alt="image-20220616115351-6.png"]]
198
199
200
201 == **3.5 System** ==
202
203
204 === **3.5.1  System ~-~-> System Overview** ===
205
206
207 Shows the system info:
208
209 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220917144512-5.png?width=853&height=618&rev=1.1||alt="image-20220917144512-5.png"]]
210
211
212
213 === **3.5.2 System ~-~-> Backup/Restore** ===
214
215
216 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220917144725-6.png?width=869&height=208&rev=1.1||alt="image-20220917144725-6.png"]]
217
218
219 = (% id="cke_bm_1978S" style="display:none" %)** **(%%)**4. Build in Server** =
220
221
222 The default factory version of LG01-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red**
223
224
225 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220820115644-1.png?width=778&height=217&rev=1.1||alt="image-20220820115644-1.png"]]
226
227
228 (% style="color:red" %)**Note:**
229
230 **Path**: System ~-~-> Built-in Server
231
232
233 **Troubleshooting:**
234
235
236 **~ 1. URL does not jump properly**
237
238 For the Node-Red, you can use the local IP address and the port is 1880 to access it.
239
240
241
242 == **4.1 Application Server ~-~- Node-Red** ==
243
244
245 You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
246
247
248 Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
249
250
251 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220725172124-3.png?width=843&height=610&rev=1.1||alt="image-20220725172124-3.png"]]
252
253
254 = **5. How to configure the Lora Gateway** =
255
256
257 == **5.1 Access the Lora configuration page** ==
258
259
260 Users can access the Lora configuration page by running the following command, then select the option **''serial port setup"**:
261
262 (% class="box infomessage" %)
263 (((
264 **root@dragino-2406ef:~~# minicom -s**
265 )))
266
267 [[image:image-20221029174637-2.png||height="410" width="524"]]
268
269
270 And then, change the setting:
271
272 (% class="box infomessage" %)
273 (((
274 **Serial Device :** **/dev/ttyUSB0**
275
276 **Bps/Par/Bits : 9600 8N1**
277 )))
278
279
280 (% style="color:red" %)**Note: Enter the corresponding letter to change the configuration, like A,B,C**(%%)
281 (% style="color:red" %)[[image:image-20221029174703-3.png]]
282
283
284 Enter **AT+CFG **in the interface to get the configuration,
285
286
287 (% class="box infomessage" %)
288 (((
289 AT+FRE=868.100,868.100  ~-~--> TX and RX frequency
290 AT+GROUPMOD=0,0  ~-~--> TX and RX group
291 AT+BW=0,0  ~-~--> TX and RX Bandwidth
292 AT+SF=12,12  ~-~--> TX and RX Spreading Factor
293 AT+POWER=14  ~-~--> TX Power Range
294 AT+CRC=1,1  ~-~--> TX and RX CRC Type
295 AT+HEADER=0,0  ~-~--> TX and RX Header Type
296 AT+CR=1,1  ~-~--> TX and RX Coding Rate
297 AT+IQ=0,0  ~-~--> TX and RX InvertIQ
298 AT+PREAMBLE=8,8  ~-~--> TX and RX Preamble Length
299 AT+SYNCWORD=0  ~-~-->  Syncword**(0: private，1: public)**
300 AT+RXMOD=65535,0  ~-~-->  Rx Timeout and Reply mode
301 AT+RXDAFORM=1                              
302 )))
303
304
305 == **5.2 Example: LG01**-**V2 Peer-to-Peer** ==
306
307
308 [[image:image-20221104102736-3.png||height="282" width="723"]]
309
310
311 The user can run the AT command to set the LG01-V2 RX window always open as a Receiver, the LA66 Shield uses **AT+SEND=1,hello world,2,3** to simulate sending data,
312
313 **Prerequisites: **The configuration of LG01-V2 and  LA66 Shield must match, users can use **AT+CFG** to check all configurations.
314
315
316 (% style="color:red; font-weight:bold" %)**LG01-V**(% style="color:red" %)**2 as Receiver: (configured as AT+RXMOD=65535,2)**
317
318 [[image:image-20221102140053-4.png]]
319
320
321 (% style="color:red" %)**LA66 Shield as Sender: (AT+SEND=1,hello world,2,3)**
322
323 [[image:1667456058832-484.png||height="291" width="353"]]
324
325
326 Instruction for Peer-to-Peer firmware:[[ **Instruction **>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/Instruction%20for%20LA66%20Peer%20to%20Peer%20firmware/]]
327 )))
328
329
330 Users can import this example in node-red: **[[attach:serial USB.json||target="_blank"]]**
331
332 [[image:image-20221104100520-2.png||height="605" width="1150"]]
333
334
335 = (% style="color:inherit; font-family:inherit; font-size:29px" %)**6. How users can access LG01**(%%)**-V​​​​​​​(% style="color:inherit; font-family:inherit; font-size:29px" %)2 using serial USB(%%)** =
336
337
338 (% style="color:blue" %)**USB TTL to LG01-V2  Connection:**
339
340
341 Port 1 of the UART on the LG01-V2 is GND
342
343 (% class="box infomessage" %)
344 (((
345 **TXD  <~-~--> UART RXD (Gray line)**
346
347 **RXD  <~-~--> UART TXD (White line)**
348
349 **GND <~-~--> GND (Black line)**
350 )))
351
352
353 **LG01-V2 UART connection photo**
354
355 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804163015-1.png?width=466&height=621&rev=1.1||alt="image-20220804163015-1.png"]]
356
357
358
359 In the PC, you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LG01v2. LG01v2 will output system info once power on as below:
360
361
362 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804164928-3.png?width=332&height=320&rev=1.1||alt="image-20220804164928-3.png"]]
363
364 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804164747-2.png?width=594&height=622&rev=1.1||alt="image-20220804164747-2.png"]]
365
366
367 = **7. FAQ** =
368
369
370 == **7.1 How does LG01-V2 communicate with Lora shield (LoRa.h)** ==
371
372
373 This example describes how to use LG01-V2, LoRa Shield to set up a LoRa network
374
375 [[image:image-20221103152238-8.png||height="251" width="654"]]
376
377
378 (% style="color:red" %)**Prerequisites: The configurations of LG01-V2 and Lora shield must match**
379
380 **LG01-V2 configuration:**
381
382 (% class="box infomessage" %)
383 (((
384 AT+FRE=868.100,868.100  ~-~--> TX and RX frequency set: 868100000
385 AT+BW=0,0  ~-~--> TX and RX Bandwidth set: 125kHz
386 AT+SF=12,12  ~-~--> TX and RX Spreading Factor set: SF12
387 AT+POWER=14  ~-~--> TX Power Range
388 AT+CRC=1,1  ~-~--> TX and RX CRC Type
389 AT+HEADER=0,0  ~-~--> TX and RX Header Type
390 AT+CR=1,1  ~-~--> TX and RX Coding Rate
391 AT+IQ=0,0  ~-~--> TX and RX InvertIQ
392 AT+PREAMBLE=8,8  ~-~--> TX and RX Preamble Length set: 8
393 AT+SYNCWORD=0  ~-~-->  Syncword**(0: private，1: public), **the corresponding Lora shield syncword is 0x12
394 AT+RXMOD=65535,0  ~-~-->  Rx Timeout and Reply mode,RX window always open
395 AT+RXDAFORM=1    
396 )))
397
398 **Lora shield configuration:**
399
400 Lora Shield example: [[attach:LoRa_Shield_Sketch_For_MQTT.ino||target="_blank"]] , [[attach:arduino-LoRa-master.zip||target="_blank"]]
401
402 [[image:image-20221101161318-2.png]]
403
404
405 **Test LG01-V2 to receive Lora Shield data:**
406
407 [[image:image-20221101161951-3.png]]
408
409
410 **Test the LG01-V​​​​​​​2 to send data:**
411
412 [[image:image-20221101162527-4.png]]
413
414
415 = (% style="color:inherit; font-family:inherit; font-size:29px" %)**8. Supports**(%%) =
416
417
418 (((
419 **//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
420 )))
421
422 (((
423 **//With your question as detailed as possible. We will reply and help you in the shortest.//**
424
425
426
427 = **9. Reference** =
428
429
430 * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
431 * [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
432
433
434 )))
435
436 = **10. Order Info** =
437
438
439 (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
440
441 (% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
442
443 * (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
444 * (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
445 * (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
446 * (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
447 * (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
448 * (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
449
450 (% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
451
452 * (% style="color:red" %)**E**(%%):  EMEA, Korea, Thailand, India.
453 * (% style="color:red" %)**A**(%%):  North America/ Rogers/AT&T/T-Mobile.
454 * (% style="color:red" %)**AU**(%%): Latin America, New Zeland, Taiwan
455 * (% style="color:red" %)**J**(%%):  Japan, DOCOMO/SoftBank/ KDDI
456
457 More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
458
459
460
461 = **10. Manufacturer Info** =
462
463
464 **Shenzhen Dragino Technology Development co. LTD**
465
466 Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
467
468 LongCheng Street, LongGang District ; Shenzhen 518116,China
469
470
471
472 = **11. FCC Warning** =
473
474
475 (((
476 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
477 )))
478
479 (((
480 ~-~- Reorient or relocate the receiving antenna.
481 )))
482
483 (((
484 ~-~- Increase the separation between the equipment and receiver.
485 )))
486
487 (((
488 ~-~- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
489 )))
490
491 (((
492 ~-~- Consult the dealer or an experienced radio/TV technician for help.
493 )))
494
495
496 (((
497 Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
498 )))
499
500
501 (((
502 The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
503
504
505 )))
506
507 ~)~)~)

Applications

Navigation

Copyright ©2010-2022 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0