Show last authors
1 (% style="text-align:center" %)
2 [[image:image-20221028134937-1.jpeg||height="466" width="466"]]
3
4 (((
5
6
7
8 )))
9
10 **Table of Contents:**
11
12 {{toc/}}
13
14 = **1. Introduction** =
15
16
17 == **1.1 What is LG01-V2** ==
18
19
20 (((
21 (((
22 The LG01-V2 is an (% style="color:green" %)**open-source single channel LoRa Gateway**(%%). It lets you bridge LoRa wireless network to an IP network via (% style="color:green" %)**WiFi , Ethernet or Cellular Network**(%%) (via Optional 4G module). The LoRa wireless allows users to send data and reach extremely long ranges at low data rates.
23 )))
24
25 (((
26 LG01-V2 supports (% style="color:green" %)**remote management**(%%). System Integrator can easy to remote monitor the gateway and maintain it.
27 )))
28
29
30
31 == **1.2 Specifications** ==
32
33
34 (% style="color:#037691" %)**Hardware System:**
35
36 * CPU: Quad-core Cortex-A7 1.2Ghz
37 * RAM: 512MB
38 * eMMC: 4GB
39
40 (% style="color:#037691" %)**Interface:**
41
42 * 10M/100M RJ45 Ports x 1
43 * WiFi 802.11 b/g/n
44
45 (% style="color:#037691" %)**Operating Condition:**
46
47 * Work Temperature: -20 ~~ 65°C
48 * Storage Temperature: -20 ~~ 65°C
49 * Power Input: 5V, 2A, DC
50
51 == **1.3 Features** ==
52
53
54 * Open Source Debian system
55 * Managed by Web GUI, SSH via WAN or WiFi
56 * Remote Management
57 * Auto-provisioning for batch deployment and management
58 * LoRa Gateway
59 * Built-in (% style="color:#037691" %)//**The Things Network**//(%%) local LoRaWAN server
60 * Built-in  (% style="color:#037691" %)//**Node-Red**// (%%)local Application server
61
62 == **1.4 Block Diagram** ==
63
64
65
66 == **1.5 LED Indicators** ==
67
68
69 LG01-V2 has totally four LEDs, They are:
70
71
72 (% style="color:blue" %)//**➢ Power LED**//(%%)//: This RED LED will be solid if the device is properly powered//
73
74 (% style="color:blue" %)//**➢ ETH LED**//(%%)//:  This RGB LED will blink GREEN when the ETH port is connecting//
75
76 (% style="color:blue" %)//**➢ SYS LED**//(%%)//:  This RGB LED will show different colors in different states~://
77
78 // ✓ **SOLID GREEN:** The device is alive with a LoRaWAN server connection.//
79
80 // ✓ **BLINKING GREEN:** a) Device has internet connection but no LoRaWAN Connection. or b) Device is in booting stage, in this stage, it will BLINKING GREEN for several seconds and then with BLINKING GREEN together//
81
82 // ✓** SOLID RED:** Device doesn't have an Internet connection.//
83
84 (% style="color:blue" %)//**➢ WIFI LED**//(%%)//: This LED shows the WIFI interface connection status.//
85
86
87
88 == **1.6 Button Intruction** ==
89
90
91 LG01-V2 has a black toggle button, which is:
92
93
94 (% style="color:blue" %)**//➢ //Long press 4-5s  : **(%%)the gateway will reload the Network and Initialize wifi configuration
95
96 // **LED status: ** ETH LED will BLINKIND BULE Until the reload is finished.//
97
98
99 (% style="color:blue" %)//**➢ **//**Long press more than 10s:**(%%)**    **//the gateway will restore the factory settings.//
100
101 //**LED status: ** ETH LED will SOLID BULE Until the restore is finished.//
102
103
104
105 = **2. Quick Start** =
106
107
108 The LG01-V2 supports network access via Ethernet or Wi-Fi connection and runs without a network.
109
110 In most cases, the first thing you need to do is make the LG01-v2 accessible to the network.
111
112
113 == **2.1 Connects to the network and accesses the gateway Web UI** ==
114
115
116 == **2.1.1 connect the network.** ==
117
118
119 === (% style="color:blue" %)**Method 1**(%%):  Connect via Ethernet with DHCP IP from the router ===
120
121
122 Connect the LG01-V2 Ethernet port to your router and LG01-V2 can obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the LG01-V2.
123
124 You can also use this IP to connect.
125
126
127 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622100129-1.png?width=1263&height=332&rev=1.1||alt="image-20220622100129-1.png"]]
128
129
130 === (% style="color:blue" %)**Method 2**(%%):  Connect via WiFi with DHCP IP from the router ===
131
132
133 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622100542-2.png?width=1256&height=369&rev=1.1||alt="image-20220622100542-2.png"]]
134
135 The LG01-V2 has a fall-back IP address on its WAN port. you have to access the gateway Web-UI to configure the WiFi connection via the fallback IP address.
136
137
138 (% style="color:#037691" %)**Steps to connect via fallback IP:**
139
140 ~1. Connect PC's Ethernet port to LG01-V2's WAN port
141
142 2. Configure PC's Ethernet port has  IP: 172.31.255.253 and Netmask: 255.255.255.252
143
144
145 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622101433-4.png?rev=1.1||alt="image-20220622101433-4.png"]]
146
147
148 and then On the PC, use the IP address **http:~/~/172.31.255.254** to access the LG01-V2 via Web or Console.
149
150
151 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102210-5.png?width=919&height=504&rev=1.1||alt="image-20220622102210-5.png"]]
152
153
154 Fill in the WiFi information by checking the box and clicking (% style="color:red" %)**Save&Apply**
155
156
157 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102702-6.png?rev=1.1||alt="image-20220622102702-6.png"]]
158
159
160 **Wi-Fi configuration successful**
161
162
163 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102847-7.png?rev=1.1||alt="image-20220622102847-7.png"]]
164
165 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?width=938&height=476&rev=1.1||alt="image-20220622102901-8.png"]]
166
167
168 = **3. Web Configure Pages** =
169
170 == **3.1 Home** ==
171
172 //Shows the system running status~://
173
174 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220622102901-8.png?rev=1.1||alt="image-20220622102901-8.png" height="476" width="939"]]
175
176
177 == **3.2 Network Settings** ==
178
179
180 === **3.2.1 Network ~-~-> WiFi** ===
181
182
183 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220616114756-4.png?width=669&height=251&rev=1.1||alt="image-20220616114756-4.png"]]
184
185
186
187 === **3.4.2 Network ~-~-> System Status** ===
188
189
190 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220820134112-2.png?width=668&height=539&rev=1.1||alt="image-20220820134112-2.png"]]
191
192
193
194 === **3.4.3 Network ~-~-> Firewall** ===
195
196
197 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220616115351-6.png?width=661&height=244&rev=1.1||alt="image-20220616115351-6.png"]]
198
199
200
201 == **3.5 System** ==
202
203
204 === **3.5.1  System ~-~-> System Overview** ===
205
206
207 Shows the system info:
208
209 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220917144512-5.png?width=853&height=618&rev=1.1||alt="image-20220917144512-5.png"]]
210
211
212
213 === **3.5.2 System ~-~-> Backup/Restore** ===
214
215
216 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220917144725-6.png?width=869&height=208&rev=1.1||alt="image-20220917144725-6.png"]]
217
218
219
220 = **4. How to configure the Lora Gateway** =
221
222
223 == **4.1 Access the Lora configuration page** ==
224
225
226 Users can access the Lora configuration page by running the following command, then select the option **''serial port setup"**:
227
228 (% class="box infomessage" %)
229 (((
230 **root@dragino-2406ef:~~# minicom -s**
231 )))
232
233 [[image:image-20221029174637-2.png||height="410" width="524"]]
234
235
236 And then, change the setting:
237
238 (% class="box infomessage" %)
239 (((
240 **Serial Device :** **/dev/ttyUSB0**
241
242 **Bps/Par/Bits : 9600 8N1**
243 )))
244
245
246 (% style="color:red" %)**Note: Enter the corresponding letter to change the configuration, like A,B,C**(%%)
247 (% style="color:red" %)[[image:image-20221029174703-3.png]]
248
249
250 Enter **AT+CFG **in the interface to get the configuration,
251
252
253 (% class="box infomessage" %)
254 (((
255 AT+FRE=868.100,868.100  ~-~--> TX and RX frequency
256 AT+GROUPMOD=0,0  ~-~--> TX and RX group
257 AT+BW=0,0  ~-~--> TX and RX Bandwidth
258 AT+SF=12,12  ~-~--> TX and RX Spreading Factor
259 AT+POWER=14  ~-~--> TX Power Range
260 AT+CRC=1,1  ~-~--> TX and RX CRC Type
261 AT+HEADER=0,0  ~-~--> TX and RX Header Type
262 AT+CR=1,1  ~-~--> TX and RX Coding Rate
263 AT+IQ=0,0  ~-~--> TX and RX InvertIQ
264 AT+PREAMBLE=8,8  ~-~--> TX and RX Preamble Length
265 AT+SYNCWORD=0  ~-~-->  Syncword**(0: private,1: public)**
266 AT+RXMOD=65535,0  ~-~-->  Rx Timeout and Reply mode
267 AT+RXDAFORM=1                              
268 )))
269
270
271 == **4.2 Example: LG01**-**V2 Peer-to-Peer** ==
272
273
274 [[image:image-20221103152033-7.png||height="281" width="620"]]
275
276
277 The user can run the AT command to set the LG01-V2 RX window always open as a Receiver, the LA66 Shield uses **AT+SEND=1,hello world,2,3** to simulate sending data,
278
279 **Prerequisites: **The configuration of LG01-V2 and  LA66 Shield must match, users can use **AT+CFG** to check all configurations.
280
281
282 (% style="color:red; font-weight:bold" %)**LG01-V**(% style="color:red" %)**2 as Receiver: (configured as AT+RXMOD=65535,2)**
283
284 [[image:image-20221102140053-4.png]]
285
286
287 (% style="color:red" %)**LA66 Shield as Sender: (AT+SEND=1,hello world,2,3)**
288
289 [[image:1667456058832-484.png||height="291" width="353"]]
290
291
292 Instruction for Peer-to-Peer firmware:[[ **Instruction **>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Shield%20User%20Manual/Instruction%20for%20LA66%20Peer%20to%20Peer%20firmware/]]
293 )))
294
295
296 = **5. Build in Server** =
297
298
299 The default factory version of LG01-V2 is installed with the built-in Applicant server: (% style="color:blue" %)**Node-Red**
300
301
302 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220820115644-1.png?width=778&height=217&rev=1.1||alt="image-20220820115644-1.png"]]
303
304
305 (% style="color:red" %)**Note:**
306
307 **Path**: System ~-~-> Built-in Server
308
309
310 **Troubleshooting:**
311
312
313 **~ 1. URL does not jump properly**
314
315 For the Node-Red, you can use the local IP address and the port is 1880 to access it.
316
317
318
319 == **5.1 Application Server ~-~- Node-Red** ==
320
321
322 You can access the gateway's built-in AS server of (% style="color:blue" %)**Node-Red **(%%)via the URL((% style="background-color:yellow" %)__**//http:~/~/<hostname>:1880 or http:~/~/<local-IPV4-address>//**__(%%)) in your browser.
323
324
325 Such as (% style="background-color:yellow" %)__**//http:~/~/dragino-54ff12:1880  or http:~/~/<Local-IPV4-Address>//**__
326
327
328 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220725172124-3.png?width=843&height=610&rev=1.1||alt="image-20220725172124-3.png"]]
329
330
331 = (% style="color:inherit; font-family:inherit; font-size:29px" %)**6. How users can access LG01**(%%)**-V​​​​​​​(% style="color:inherit; font-family:inherit; font-size:29px" %)2 using serial USB(%%)** =
332
333
334 (% style="color:blue" %)**USB TTL to LG01-V2  Connection:**
335
336
337 Port 1 of the UART on the LG01-V2 is GND
338
339 (% class="box infomessage" %)
340 (((
341 **TXD  <~-~--> UART RXD (Gray line)**
342
343 **RXD  <~-~--> UART TXD (White line)**
344
345 **GND <~-~--> GND (Black line)**
346 )))
347
348
349 **LG01-V2 UART connection photo**
350
351 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804163015-1.png?width=466&height=621&rev=1.1||alt="image-20220804163015-1.png"]]
352
353
354
355 In the PC, you can use the serial port tool(such as [[putty>>url:http://www.chiark.greenend.org.uk/~~sgtatham/putty/download.html]] in Windows), you need to set the serial baud rate to (% style="color:blue" %)**115200**(%%) to access the serial console for LG01v2. LG01v2 will output system info once power on as below:
356
357
358 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804164928-3.png?width=332&height=320&rev=1.1||alt="image-20220804164928-3.png"]]
359
360 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20All%20Gateway%20models/HP0C/WebHome/image-20220804164747-2.png?width=594&height=622&rev=1.1||alt="image-20220804164747-2.png"]]
361
362
363 = **7. FAQ** =
364
365
366 == **7.1 How does LG01-V2 communicate with Lora shield (LoRa.h)** ==
367
368
369 This example describes how to use LG01-V2, LoRa Shield to set up a LoRa network
370
371 [[image:image-20221103152238-8.png||height="251" width="654"]]
372
373
374 (% style="color:red" %)**Prerequisites: The configurations of LG01-V2 and Lora shield must match**
375
376 **LG01-V2 configuration:**
377
378 (% class="box infomessage" %)
379 (((
380 AT+FRE=868.100,868.100  ~-~--> TX and RX frequency set: 868100000
381 AT+BW=0,0  ~-~--> TX and RX Bandwidth set: 125kHz
382 AT+SF=12,12  ~-~--> TX and RX Spreading Factor set: SF12
383 AT+POWER=14  ~-~--> TX Power Range
384 AT+CRC=1,1  ~-~--> TX and RX CRC Type
385 AT+HEADER=0,0  ~-~--> TX and RX Header Type
386 AT+CR=1,1  ~-~--> TX and RX Coding Rate
387 AT+IQ=0,0  ~-~--> TX and RX InvertIQ
388 AT+PREAMBLE=8,8  ~-~--> TX and RX Preamble Length set: 8
389 AT+SYNCWORD=0  ~-~-->  Syncword**(0: private,1: public), **the corresponding Lora shield syncword is 0x12
390 AT+RXMOD=65535,0  ~-~-->  Rx Timeout and Reply mode,RX window always open
391 AT+RXDAFORM=1    
392 )))
393
394 **Lora shield configuration:**
395
396 Lora Shield example: [[attach:LoRa_Shield_Sketch_For_MQTT.ino||target="_blank"]] , [[attach:arduino-LoRa-master.zip||target="_blank"]]
397
398 [[image:image-20221101161318-2.png]]
399
400
401 **Test LG01-V2 to receive Lora Shield data:**
402
403 [[image:image-20221101161951-3.png]]
404
405
406 **Test the LG01-V​​​​​​​2 to send data:**
407
408 [[image:image-20221101162527-4.png]]
409
410
411 = (% style="color:inherit; font-family:inherit; font-size:29px" %)**8. Supports**(%%) =
412
413
414 (((
415 **//If you are experiencing issues and can't solve them, you can send mail to [[support@dragino.com>>mailto:support@dragino.com]].//**
416 )))
417
418 (((
419 **//With your question as detailed as possible. We will reply and help you in the shortest.//**
420
421
422
423 = **9. Reference** =
424
425
426 * Install Tago Core: Refer **Install Tago Core in LPS8v2** in[[ Instruction>>doc:Main.Tago\.IO.WebHome]].
427 * [[Advance OS Reference Guide for LPS8v2>>doc:Main.Armbian OS instruction.WebHome]].
428
429
430 )))
431
432 = **10. Order Info** =
433
434
435 (% style="color:#0000ff" %)**LPS8v2-XXX-YYY**
436
437 (% style="color:#0000ff" %)**XXX**(% style="color:black" %): Frequency Band
438
439 * (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
440 * (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
441 * (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
442 * (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
443 * (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
444 * (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
445
446 (% style="color:#0000ff" %)**YYY**(% style="color:black" %): 4G Cellular Option
447
448 * (% style="color:red" %)**E**(%%):  EMEA, Korea, Thailand, India.
449 * (% style="color:red" %)**A**(%%):  North America/ Rogers/AT&T/T-Mobile.
450 * (% style="color:red" %)**AU**(%%): Latin America, New Zeland, Taiwan
451 * (% style="color:red" %)**J**(%%):  Japan, DOCOMO/SoftBank/ KDDI
452
453 More info about valid bands, please see [[EC25-E product page>>url:https://www.quectel.com/product/ec25.htm]].
454
455
456
457 = **10. Manufacturer Info** =
458
459
460 **Shenzhen Dragino Technology Development co. LTD**
461
462 Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad
463
464 LongCheng Street, LongGang District ; Shenzhen 518116,China
465
466
467
468 = **11. FCC Warning** =
469
470
471 (((
472 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
473 )))
474
475 (((
476 ~-~- Reorient or relocate the receiving antenna.
477 )))
478
479 (((
480 ~-~- Increase the separation between the equipment and receiver.
481 )))
482
483 (((
484 ~-~- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
485 )))
486
487 (((
488 ~-~- Consult the dealer or an experienced radio/TV technician for help.
489 )))
490
491
492 (((
493 Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
494 )))
495
496
497 (((
498 The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
499
500
501 )))
502
503 ~)~)~)
Copyright ©2010-2022 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0