The HP0D is an outdoor LoRaWAN Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi,Ethernet, optional 3G or 4G. The LoRa wireless allows users to send  data and reach extremely long ranges at low data rates.

HP0D has passed Helium Full Hotspot Approval. It supports the  miner feature from Helium  and has a built-in ATECC608 encryption chip. It can be used as a Helium Full Hotspot  for the project. It also supports Semtech packet forwarder and LoRaWAN Station connection, it is fully compatible with LoRaWAN protocol.HP0D supports two LoRaWAN servers at the same time, users can use HP0D for helium mining and connects max 2 x LoRaWAN servers at the same time.

Dragino already paid HP0D $40 onboarding cost and $10 location cost for each HP0D. It is ready to use for Helium, user only needs to input HNT wallet address and use QR Code to onboarding HP0D when it arrives.

HP0D has pre-configured standard LoRaWAN frequency bands to use for different countries. Users can also customize the frequency bands to use in their own LoRaWAN network.

Device hostname:        dragino-xxxxxx 

Band:                             US915/AU915/AS923_1-AS923_4/KR920/EU868/IN865/RU864 

Miner animal name:     xxx-xxx-xxx 

Miner address:             12xxxxxx 

Eth MAC address:         A8: 40: 41: EF: FE: CD 

Login:                            root/d59f2d5b (the root is the Login account for the Web-UI and SSH.) 

SN:                                 device serial number.

The HP0D is configured as a Wi-Fi Access Point by factory default. You can access and configure the HPD after connecting to its Wi-Fi network, or via its WAN Ethernet port.

Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address. If your PC(Windows/Mac/Ubuntu) connects to the same network with the HP0D, you can access the HP0D Web-UI via HP0D's hostname.

Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address from your router. In the router's management portal, you should be able to find what IP address the router has assigned to the HP0D.

If you get the IP address from the router, like: 10.130.2.42, you can use this IP address to connect the WEB UI or SSH access of HP0D.

Go to Miner --> QR Generate, input your Helium Wallet Address, and click Generate.

Note: After onboarding, this wallet will become the owner of this hotspot.

1. Download the Dragino App from this link.

Users need to download two apps：Dragino APPand Helium Wallet  (Android Version Only)

2. sign in helium account 

3. To add a hotspot, select “+ add Hotspot”. On this tab, click the “+ Add Hotspot" in the mid where choose the  "DRAGINO Miner HP0D"

5. Onboarding your device

Mobile APP will get info from the onboarding server. If the MAC address doesn't appear, it means the network connection of the mobile to the onboarding server might have an issue.   

6. Check onboarding status where you can check from mobile:

Helium Hotspots may not work if the Hotspot is behind a firewall or uses an incompatible NAT type. Other times it may be because of a router configuration or the internet is offline. This article aims to help resolve any issues you may have.

Note: Check the Region and Height, the default height is greater than 1, if it is 1 please Click the mid button of Update, and then wait 10mins to check here.

3.4 Check the Miner state

HP0D uses Fiber Glass Antenna.

The user needs to connect the antenna cable's SMA connector to the HP03 and connect the N-Type connector to the antenna and install it as below:

Connect the HP0D Ethernet port to your router and HP0D will obtain an IP address from your router.

In the router's management portal, you should be able to find what IP address the router has assigned to the HP0D.

You can use this IP or hostname of HP0D to connect the WEB UI or SSH access of HP0D.

Make sure your PC and the HP0D are in the same network, the use an SSH tool (such as putty) to access it.

IP address:     IP address of HP0D or hostname of HP0D (Such as dragino-7df4af)

Port:                  22

User Name:      root

Password:         Randomly generated （found on device's label）

After logging in, you will be in the Linux console and can enter commands as shown below.

Users can log in to the HP0D, able to access other Web Pages except for the miner page.

If you first boot the device where you need to wait for 10 mins for the initialization connection to the Helium server.

This may be related to the current block height, if the device is synchronizing to the latest height or if the device block height is much lower than the current height as the above picture like '1 1', the QR code generation may fail.

Please ensure that you enter the correct wallet address and that your network is up and running, the user can click the button of ‘Clean’ to re-generate the QR Code.

If you see the MAC Address shows the ‘Unknown’ where is due to the provisioning error, please contact us to help you solve it.

After scanning the QR Code, Mobile APP will connect to the Helium onboarding server and provide the public key/ wallet address to the onboarding server. The server will return the match MAC address for this hotspot.

If you don't see the MAC address, make sure your mobile has a good internet connection.

Each HP0D is inspected and configured prior to shipping.

If your HP0D Web-UI – Miner region is not the same as the shell labels, please contact our support team that will solve this issue for you.

Please make sure that the region supports this frequency, you can confirm the appropriate frequency through this link:

https://docs.helium.com/lorawan-on-helium/frequency-plans

      1). There is an update button in the middle of the miner page, click this button and then the miner will be reinstalled.

      2). Run the "minerup update" command to reinstall the miner

Note: You can find the above three points on the Miner page, and If you are familiar with the Linux command line you can use the following command

This is the result of the OTA not being updated in time

You can reboot your hotspot or upgrade these packages manually.

We have installed drivers for common USB 4G Dongle,

and managed by NetworkManager, once hp0d detects an available USB 4G Dongle it will try to dial up the range network

The HP0D is use the IEEE 802.3 af compliant PoE port (input 44 ~ 57 v, output 12V)

So you can use the PoE switches or PoE injector to power the device.

Note: The RJ45 Indicator light only represents the PoE power supply, so when you use DC to power the hotspot and the RJ45 indicator light is off   ---> this is normal

If you are experiencing issues and can’t solve them, you can send mail to support@dragino.com.

With your question as detailed as possible. We will reply and help you in the shortest.

Shenzhen Dragino Technology Development co. LTD

Room 202, Block B, BCT Incubation Bases (BaoChengTai),  No.8 CaiYunRoad

Longcheng Street, LongGang District; Shenzhen 518116, China

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.