Wiki source code of Mydevices

Version 15.1 by Bei Jinggeng on 2022/06/21 16:46

version	line-number	content
1.3	1	~ Contents：
1.1	2
1.3	3	{{toc/}}
1.1	4
1.3	5
13.1	6	= 1. Setup Gateway to connect to Mydevices =
1.1	7
1.2	8	== 1.1 Introduction ==
1.1	9
1.2	10	(((
	11	The Dragino LoRaWAN gateway amd end node can commuicate with Mydevices LoRaWAN Network Server: [[Mydevices>>url:https://console.mydevices.thethings.industries/]]
5.2	12
	13
1.2	14	)))
1.1	15
1.2	16	== 1.2 Gateway Registered ==
1.1	17
1.2	18	Step 1: Get the GWID of the gateway and set the correct service address
1.1	19
5.2	20	[[image:image-20220526154956-1.png]]
1.1	21
1.2	22	Configure the gateway
1.1	23
	24
1.2	25	Step 2: Select Gateway in the mydevice console
1.1	26
5.2	27	[[image:image-20220526155036-2.png]]
1.1	28
1.2	29	Select Gateway
1.1	30
	31
5.2	32	Step 3: Registered gateway for mydevice
1.1	33
5.2	34	[[image:image-20220526155114-3.png]]
1.2	35
	36	Registered gateway for mydevice
	37
5.2	38
1.2	39	== 1.3 Check Gateway connection ==
	40
	41	Users can check if the gateway is properly connected according to 'Satus' or check the gateway WEB like below
	42
10.2	43	[[image:image-20220526155145-4.png]]
1.2	44
	45	Check Status1
	46
	47
10.2	48	[[image:image-20220526155223-5.png]]
1.2	49
	50	Check statis2
	51
10.2	52
1.2	53	== 1.4 Check Gateway traffic from Mydevie ==
	54
	55	user can see the gateway traffic
	56
10.2	57	[[image:image-20220526155317-6.png]]
1.2	58
	59	Gateway trafiic
	60
10.2	61
1.2	62	== 1.5 Add up End node for mydevice ==
	63
	64	(((
	65	Step 1 :Create a device in TTN with the OTAA keys from LT IO controller. Each end node is shipped with a sticker with the default device EUI as below:
	66	)))
	67
	68	(% class="box infomessage" %)
	69	(((
1.4	70	AT+DEUI=a8 40 41 08 01 81 87 49
1.2	71	AT+APPKEY=01 8e e4 c9 b6 c9 d6 86 3a 6f 48 5e db cc 6d 69
	72	AT+APPEUI=70 b3 d5 7e d0 01 5f 25
	73	)))
	74
	75	(((
	76	User can enter this key in their LoRaWAN Server portal. Below is mydevice screen shot: Add APP EUI in the application.
	77	)))
	78
10.2	79	[[image:image-20220526155353-7.png]]
1.2	80
	81	Add App EUI
	82
	83
	84	Add APP KEY and DEV EUI
	85
10.2	86	[[image:image-20220526155419-8.png]]
1.2	87
	88	Add App key and App DEUI
	89
	90
	91	(((
	92	Step 2 :Power on end node and it will auto join to the TTN network. After join success, it will start to upload message to Mydevice and user can see in the panel and analyze the data
	93	)))
	94
11.2	95	[[image:image-20220526155449-9.png]]
1.2	96
	97	Join mydevice of end node
13.1	98
	99
	100	= 2. Route a TTN End Node to Cayenne =
	101
	102
	103
	104
	105	= 3. Create Alarm event in Cayenne =
	106
	107
	108

Wiki source code of Mydevices

Applications

Navigation