Wiki source code of Firmware Upgrade Instruction -- ASR
Hide last authors
| author | version | line-number | content |
|---|---|---|---|
 |
1.11 | 1 | (% class="wikigeneratedid" %) |
| |
1.14 | 2 | **~ Contents:** |
| |
1.11 | 3 | |
| 4 | {{toc/}} | ||
| 5 | |||
| 6 | |||
| |
1.2 | 7 | = 1. Introduction = |
| |
1.1 | 8 | |
| |
1.2 | 9 | This article shows the firmware upgrade method and troubleshooting for the below models Dragino sensors. |
| |
1.1 | 10 | |
| |
3.2 | 11 | |
| |
1.2 | 12 | = 2. Model and Connection = |
| |
1.1 | 13 | |
| |
1.2 | 14 | == 2.1 LDS01/LWL01 == |
| |
1.1 | 15 | |
| |
1.2 | 16 | [[Firmware Location>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LDS01/Firmware/]] |
| |
1.1 | 17 | |
| |
1.12 | 18 | ((( |
| |
1.2 | 19 | Pin Mapping: |
| |
1.12 | 20 | ))) |
| |
1.1 | 21 | |
| |
3.2 | 22 | [[image:image-20220527083845-1.png]] |
| |
1.1 | 23 | |
| |
1.2 | 24 | LDS01/LWL01 Pin Mapping |
| |
1.1 | 25 | |
| |
3.2 | 26 | |
| |
1.2 | 27 | DAP-Link Connection: |
| |
1.1 | 28 | |
| |
3.2 | 29 | [[image:image-20220527083959-2.png]] |
| |
1.1 | 30 | |
| |
1.2 | 31 | Connect DAP-Link |
| 32 | |||
| |
1.1 | 33 | |
| |
1.2 | 34 | == 2.2 LDS02/LWL02 == |
| |
1.1 | 35 | |
| |
1.2 | 36 | [[Firmware Location(same as LDS01)>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LDS01/Firmware/]] |
| |
1.1 | 37 | |
| |
1.12 | 38 | ((( |
| |
1.2 | 39 | Pin Mapping: |
| |
1.12 | 40 | ))) |
| |
1.1 | 41 | |
| |
1.2 | 42 | [[image:https://wiki.dragino.com/images/thumb/8/8b/ASR_Upgrade_LDS02_1.png/600px-ASR_Upgrade_LDS02_1.png||height="256" width="600"]] |
| |
1.1 | 43 | |
| |
1.2 | 44 | LDS02/LDS02 v2.0 Pin Mapping |
| 45 | |||
| |
1.3 | 46 | [[image:https://wiki.dragino.com/images/thumb/1/1c/ASR_Upgrade_LDS02_2.png/600px-ASR_Upgrade_LDS02_2.png||height="246" width="547"]] |
| |
1.2 | 47 | |
| 48 | LDS02/LDS02 v2.2 Pin Mapping | ||
| 49 | |||
| 50 | |||
| 51 | == 2.3 LHT52 == | ||
| 52 | |||
| |
1.8 | 53 | [[Firmware Location>>https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LHT52/firmware/]] |
| |
1.2 | 54 | |
| |
1.8 | 55 | [[image:https://wiki.dragino.com/images/thumb/e/e0/ASR_Upgrade_LHT52_1.png/600px-ASR_Upgrade_LHT52_1.png||height="401" width="553"]] |
| |
1.2 | 56 | |
| 57 | LHT52 Pin Mapping | ||
| 58 | |||
| 59 | = 3. How to Upgrade = | ||
| 60 | |||
| 61 | == 3.1 Use DAP-Link and Connect to the Device as above photos == | ||
| 62 | |||
| 63 | We need to connect VDD，GND，SWCLK，SWDIO to DAP-Link. | ||
| 64 | |||
| 65 | * Connection method： | ||
| 66 | |||
| 67 | * GND-GND, | ||
| 68 | |||
| 69 | * VDD-3.3V, | ||
| 70 | |||
| 71 | * SWCLK-CLK, | ||
| 72 | |||
| 73 | * SWDIO-SWD | ||
| 74 | |||
| 75 | [[image:https://wiki.dragino.com/images/8/81/DAPlink.png||alt="DAPlink.png" height="539" width="334"]] | ||
| 76 | |||
| 77 | |||
| 78 | == 3.2 Install PSoCProgrammer 3.27.1 == | ||
| 79 | |||
| |
1.11 | 80 | ((( |
| |
1.2 | 81 | Download Link: [[PSoCProgrammer3.27.1>>url:https://www.dragino.com/downloads/index.php?dir=tools/]] |
| |
1.11 | 82 | ))) |
| |
1.2 | 83 | |
| |
1.11 | 84 | ((( |
| |
1.2 | 85 | And then use PSoCProgrammer to upgrade the firmware (must use this version: PSoCProgrammer3.27.1) |
| |
1.11 | 86 | ))) |
| |
1.2 | 87 | |
| 88 | [[image:https://wiki.dragino.com/images/0/0f/Ppp1.png||alt="Ppp1.png" height="68" width="318"]] | ||
| 89 | |||
| 90 | |||
| 91 | == 3.3 Download Sensor Firmware == | ||
| 92 | |||
| 93 | Downlink sensor firmware to prepare the update | ||
| 94 | |||
| 95 | |||
| 96 | == 3.4 Upgrade Firmware == | ||
| 97 | |||
| 98 | Open PSOC Programmer, select the default configuration, no need to modify | ||
| 99 | |||
| 100 | [[image:https://wiki.dragino.com/images/thumb/9/94/Ppp10.png/600px-Ppp10.png||alt="Ppp10.png" height="198" width="600"]] | ||
| 101 | |||
| 102 | Click the file icon to select the software to be burned： | ||
| 103 | |||
| 104 | [[image:https://wiki.dragino.com/images/thumb/d/d0/Ppp11.png/600px-Ppp11.png||alt="Ppp11.png" height="218" width="600"]] | ||
| 105 | |||
| 106 | [[image:https://wiki.dragino.com/images/thumb/e/ec/Ppp12.png/600px-Ppp12.png||alt="Ppp12.png" height="265" width="600"]] | ||
| 107 | |||
| 108 | |||
| |
1.10 | 109 | ((( |
| |
1.2 | 110 | Click the download icon, and the progress bar as shown in the figure below will appear. When PASS appears, it proves that the burning is successful. |
| |
1.10 | 111 | ))) |
| |
1.2 | 112 | |
| 113 | [[image:https://wiki.dragino.com/images/thumb/e/e2/Ppp13.png/600px-Ppp13.png||alt="Ppp13.png" height="337" width="600"]] | ||
| 114 | |||
| 115 | [[image:https://wiki.dragino.com/images/thumb/6/6f/Ppp14.png/600px-Ppp14.png||alt="Ppp14.png" height="338" width="600"]] | ||
| 116 | |||
| |
1.9 | 117 | ((( |
| |
1.2 | 118 | It is very important to press the reset button after the upgrade., this is to set the device to work in Low Power mode |
| |
1.9 | 119 | ))) |
| |
1.2 | 120 | |
| |
1.9 | 121 | ((( |
| |
1.2 | 122 | *If you change different LoRa Frequency Bands/Region, you need using AT+FDR command to restore factory data after program success |
| |
1.9 | 123 | ))) |
| |
1.2 | 124 | |
| 125 | = 4. Trouble Shooting = | ||
| 126 | |||
| 127 | == 4.1 Unable to detect upgrade == | ||
| 128 | |||
| 129 | * Try to shot the bootloader pin to GND and reset the device. So the device will runs in bootloader mode. | ||
| 130 | * Or use AT+IREBOOT=7 to set the device to work in bootloader mode. |