Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -7,10 +7,10 @@
7	7
8	8	Dragino LoRaWAN End Node support two types of AT Commands and Downlink Commands:
9	9
10		-* **Common Commands:** They should be available for each sensor, such as: change uplink interval, reset device.
11		-* **Sensor Related Commands:** Only for special sensor, such as control relay, poll RS485 device.
	10	+* Common Commands: They should be available for each sensor, such as: change uplink interval, reset device.
	11	+* Sensor Related Commands: Only for special sensor, such as control relay, poll RS485 device.
12	12
13		-**This page shows the common commands since Dragino LoRaWAN stack DR-LWS-005. Make sure the end node support stack higher than DR-LWS-005 before checking this page.**
	13	+This page shows the common commands since Dragino LoRaWAN stack DR-LWS-005. Make sure the end node support stack higher than DR-LWS-005 before checking this page.
14	14
15	15
16	16	= 2. How to use AT Commands or Downlink command =
...	...	@@ -21,10 +21,12 @@
21	21	** Use Base64 format to send a downlink: [[Chirpstack>>url:https://wiki.dragino.com/index.php/Notes_for_ChirpStack#Downlink]].
22	22	** See use note for more serves [[Servers Note>>url:https://wiki.dragino.com/index.php/Main_Page#Use_Note_for_Server]]
23	23
	24	+
	25	+\\
	26	+
24	24	= 3. Support End Node and firmware version =
25	25
26		-(% border="1" style="background-color:#ffffcc; color:green" %)
27		-|=(% colspan="3" %) Dragino STM32 base hardware Firmware / LoRaWAN stack list
	29	+|=(% colspan="3" %)Dragino STM32 base hardware Firmware / LoRaWAN stack list
28	28	|**Model**|**Description**|**Firmware Version <~-~-> Stack Version**
29	29	|[[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]],|Open Source Generic LoRaWAN Sensor Node|LSN50 v1.6.0 <~-~-> DR-LWS-003;(((
30	30	LSN50 v1.7.0 <~-~-> DR-LWS-005; ~-~-> Support since this version
...	...	@@ -38,6 +38,7 @@
38	38	LHT65 v1.8.0 <~-~-> DR-LWS-005;~-~-> Support since this version
39	39	)))
40	40
	43	+
41	41	= 4. System Management Commands =
42	42
43	43	== 4.1 Change Uplink Interval ==
...	...	@@ -57,6 +57,7 @@
57	57	Set transmit interval to 60000ms = 60 seconds
58	58	)))
59	59
	63	+
60	60	Downlink Command: 0x01
61	61
62	62	Format: Command Code (0x01) followed by 3 bytes time value.
...	...	@@ -124,7 +124,7 @@
124	124
125	125	|=(% colspan="3" %)AT+VER: Image Version and Frequency Band
126	126	|**Command Example**|**Function**|**Response**
127		-|AT+VER=?|Show Image version and Frequency Band|
	131	+|AT+VER=?|Show Image version and Frequency Band|
128	128
129	129	{{{1.3 EU868
130	130	OK
...	...	@@ -143,6 +143,7 @@
143	143	* 0x00 02: LBT1
144	144	* 0x00 03: LSE01/LDDS75/LDDS20/LSPH01/LLMS01/LSNPK01
145	145
	150	+
146	146	yy: Frequency Band:
147	147
148	148	* 0x01: EU868
...	...	@@ -169,7 +169,7 @@
169	169
170	170	|=(% colspan="3" %)AT+CFG: Print all configurations
171	171	|**Command Example**|**Function**|**Response**
172		-|AT+CFG|Show all configures|
	177	+|AT+CFG|Show all configures|
173	173
174	174	{{{AT+DEUI = XX XX XX XX XX XX XX XX
175	175	AT+DADDR=XXXXXXXX
...	...	@@ -195,6 +195,7 @@
195	195	)))
196	196	|AT+APPEUI=00 b3 d5 7e f0 00 4d 34|Set the Application EUI|OK
197	197
	203	+
198	198	== 5.2 Application Key ==
199	199
200	200	Feature: Get or Set the Application Key.
...	...	@@ -208,6 +208,7 @@
208	208	)))
209	209	|AT+APPKEY=00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35|Set the Application Key.|OK
210	210
	217	+
211	211	== 5.3 Application Session Key ==
212	212
213	213	Feature: Get or Set the Application Session Key.
...	...	@@ -223,6 +223,7 @@
223	223	OK
224	224	)))
225	225
	233	+
226	226	== 5.4 Device Address ==
227	227
228	228	Feature: Get or Set the Device Address.
...	...	@@ -238,6 +238,7 @@
238	238	)))
239	239	|AT+DADDR=A8 40 41 FF|Set the Application Session Key.|OK
240	240
	249	+
241	241	== 5.5 Device EUI ==
242	242
243	243	Feature: Get or Set the Device EUI.
...	...	@@ -253,6 +253,7 @@
253	253	OK
254	254	)))
255	255
	265	+
256	256	== 5.6 Network ID ==
257	257
258	258	Feature: Get or Set the Network ID.(You can enter this command change only after successful network connection)
...	...	@@ -266,6 +266,7 @@
266	266	)))
267	267	|AT+NWKID=A8 40 41 FF|Set the Network ID.|OK
268	268
	279	+
269	269	== 5.7 Network Session Key ==
270	270
271	271	Feature: Get or Set the Network Session Key
...	...	@@ -279,6 +279,7 @@
279	279	)))
280	280	|AT+NWKSKEY=A8 40 41 FF FF 12 34 56 00 01 02 04 05 06 06 07|Set the Network Session Key.|OK
281	281
	293	+
282	282	= 6. Joining and sending date on LoRaWAN network =
283	283
284	284	== 6.1 Confirm Mode ==
...	...	@@ -295,6 +295,7 @@
295	295	|AT+CFM=1|Set the confirmation mode|OK
296	296	|AT+CFM=2|Set the confirmation mode|While Error in format, return AT_PARAM_ERROR
297	297
	310	+
298	298	Downlink Command: 0x05
299	299
300	300	Format: Command Code (0x05) followed by 2 bytes mode value.
...	...	@@ -304,6 +304,7 @@
304	304	* Example 1: Downlink Payload: 0501 ~/~/ Set AT+CFM=1
305	305	* Example 2: Downlink Payload: 0500 ~/~/ Set AT+CFM=0
306	306
	320	+
307	307	== 6.2 Confirm Status ==
308	308
309	309	Feature: Get confirmation status of the last AT+SEND (0-1).
...	...	@@ -316,6 +316,7 @@
316	316	OK
317	317	)))
318	318
	333	+
319	319	== 6.3 Join LoRa® Network ==
320	320
321	321	Feature: Join network.
...	...	@@ -330,6 +330,7 @@
330	330	While Error in format, return AT_BUSY_ERROR
331	331	)))
332	332
	348	+
333	333	== 6.4 LoRa® Network Join Mode ==
334	334
335	335	Feature: Get or Set the Network Join Mode. (0: ABP, 1: OTAA).
...	...	@@ -344,6 +344,7 @@
344	344	|AT+NJM=0|Set the Network Join Mode|OK
345	345	|AT+NJM=2|Set the Network Join Mode|While Error in format, return AT_PARAM_ERROR
346	346
	363	+
347	347	Downlink Command: 0x20
348	348
349	349	Format: Command Code (0x20) followed by 1 bytes mode value.
...	...	@@ -353,6 +353,7 @@
353	353	* Example 1: Downlink Payload: 2000 ~/~/ Set AT+NJM=O
354	354	* Example 2: Downlink Payload: 2001 ~/~/ Set AT+NJM=1
355	355
	373	+
356	356	== 6.5 LoRa® Network Join Status ==
357	357
358	358	Feature: LoRa® Network Join Status.
...	...	@@ -365,6 +365,7 @@
365	365	OK
366	366	)))
367	367
	386	+
368	368	== 6.6 Print Last Received Data in Raw Format ==
369	369
370	370	Feature: Print Last Received Data in Raw Format<port:data>.
...	...	@@ -377,6 +377,7 @@
377	377	OK
378	378	)))
379	379
	399	+
380	380	== 6.7 Print Last Received Data in Binary Format ==
381	381
382	382	Feature: Print Last Received Data in Binary Format<port:data>.
...	...	@@ -389,6 +389,7 @@
389	389	OK
390	390	)))
391	391
	412	+
392	392	== 6.8 Send Text Data ==
393	393
394	394	Feature: Send Text Data<port:data>.
...	...	@@ -405,6 +405,7 @@
405	405
406	406	)))
407	407
	429	+
408	408	== 6.9 Send Hexadecimal Data ==
409	409
410	410	Feature: Send hexadecimal data along with the application port.
...	...	@@ -420,6 +420,7 @@
420	420
421	421	)))
422	422
	445	+
423	423	= 7. LoRaWAN network management =
424	424
425	425	== 7.1 Adaptive Data Rate ==
...	...	@@ -439,6 +439,7 @@
439	439	AT_PARAM_ERROR
440	440	)))
441	441
	465	+
442	442	Downlink Command: 0x22
443	443
444	444
...	...	@@ -447,6 +447,7 @@
447	447	* Example 1: Downlink Payload: 2201 ~/~/ Set AT+ADR=1.
448	448	* Example 2: Downlink Payload: 2200FFFF ~/~/ Set AT+ADR=0.
449	449
	474	+
450	450	== 7.2 LoRa® Class ==
451	451
452	452	Feature: Get or Set the Device Class(Currently only support class A, class C).
...	...	@@ -462,6 +462,7 @@
462	462
463	463	)))
464	464
	490	+
465	465	== 7.3 Duty Cycle Setting ==
466	466
467	467	Feature: Get or Set the ETSI Duty Cycle setting - 0=disable, 1=enable - Only for testing.
...	...	@@ -477,6 +477,7 @@
477	477
478	478	)))
479	479
	506	+
480	480	== 7.4 Data Rate ==
481	481
482	482	Feature: Get or Set the Data Rate. (0-7 corresponding to DR_X) . Note: while set Data Rate, please use set Adptive Data Rate, ADR=0 first. otherwise device will response to server's ADR command and change the DR to the setting from server
...	...	@@ -492,6 +492,7 @@
492	492
493	493	)))
494	494
	522	+
495	495	Downlink Command: 0x2200aaFF
496	496
497	497
...	...	@@ -500,6 +500,7 @@
500	500	* Example 1: Downlink Payload: 220001FF ~/~/ Set AT+DR=1.
501	501	* Example 2: Downlink Payload: 220000FF ~/~/ Set AT+DR=0.
502	502
	531	+
503	503	== 7.5 Frame Counter Downlink ==
504	504
505	505	Feature: Get or Set the Frame Counter Downlink.
...	...	@@ -517,6 +517,7 @@
517	517
518	518	)))
519	519
	549	+
520	520	== 7.6 Frame Counter Uplink ==
521	521
522	522	Feature: Get or Set the Frame Counter Uplink.
...	...	@@ -532,6 +532,7 @@
532	532
533	533	)))
534	534
	565	+
535	535	== 7.7 Join Accept Delay1 ==
536	536
537	537	Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 1 in ms.
...	...	@@ -547,6 +547,7 @@
547	547
548	548	)))
549	549
	581	+
550	550	== 7.8 Join Accept Delay2 ==
551	551
552	552	Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 2 in ms.
...	...	@@ -562,6 +562,7 @@
562	562
563	563	)))
564	564
	597	+
565	565	== 7.9 Public Network Mode ==
566	566
567	567	Feature: Get or Set the public network mode. (0: off, 1: on)
...	...	@@ -579,6 +579,7 @@
579	579
580	580	)))
581	581
	615	+
582	582	== 7.10 Receive Delay1 ==
583	583
584	584	Feature: Get or Set the delay between the end of the Tx and the Rx Window 1 in ms
...	...	@@ -594,6 +594,7 @@
594	594
595	595	)))
596	596
	631	+
597	597	== 7.11Receive Delay2 ==
598	598
599	599	Feature: Get or Set the delay between the end of the Tx and the Rx Window 2 in ms
...	...	@@ -609,6 +609,7 @@
609	609
610	610	)))
611	611
	647	+
612	612	== 7.12 Rx2 Window Data Rate ==
613	613
614	614	Feature: Get or Set the Rx2 window data rate (0-7 corresponding to DR_X)
...	...	@@ -624,6 +624,7 @@
624	624
625	625	)))
626	626
	663	+
627	627	== 7.13 Rx2 Window Frequency ==
628	628
629	629	Feature: Get or Set the Rx2 window frequency
...	...	@@ -639,6 +639,7 @@
639	639
640	640	)))
641	641
	679	+
642	642	== 7.14 Transmit Power ==
643	643
644	644	Feature: Get or Set the Transmit Power(0-5, MAX:0, MIN:5, according to LoRaWAN Spec, or 40=10dB, 41 = 11dB, …, 50 = 20dB which is out of LoRaWAN spec. )
...	...	@@ -661,6 +661,7 @@
661	661	* Example 1: Downlink Payload: 22000102 ~/~/ Set AT+TXP=2.
662	662	* Example 2: Downlink Payload: 220000FF ~/~/ Set AT+TXP=0.
663	663
	702	+
664	664	== 7.15 RSSI of the Last Received Packet ==
665	665
666	666	Feature: Get or Set the Rx2 window frequency
...	...	@@ -673,6 +673,7 @@
673	673	OK
674	674	)))
675	675
	715	+
676	676	== 7.16 SNR of the Last Received Packet ==
677	677
678	678	Feature: Get the SNR of the last received packet
...	...	@@ -685,6 +685,7 @@
685	685	OK
686	686	)))
687	687
	728	+
688	688	== 7.17 Application Port ==
689	689
690	690	Feature: Get or set the application port.
...	...	@@ -698,6 +698,7 @@
698	698	)))
699	699	|AT+PORT=21|Set the application port|OK
700	700
	742	+
701	701	Downlink Command: 0x23
702	702
703	703	Format: Command Code (0x23) followed by 1 bytes port value.
...	...	@@ -707,6 +707,7 @@
707	707	* Example 1: Downlink Payload: 2301 ~/~/ set the application port to 1
708	708	* Example 2: Downlink Payload: 2305 ~/~/ set the application port to 5
709	709
	752	+
710	710	== 7.18 Single Channel Mode ==
711	711
712	712	Feature:Get or Set Frequency (Unit: Hz) for Single Channel Mode.
...	...	@@ -720,6 +720,7 @@
720	720	)))
721	721	|AT+CHS=868100000|Set Frequency for Single Channel Mode|OK
722	722
	766	+
723	723	== 7.19 Eight Channel Mode ==
724	724
725	725	Feature: Get or Set eight channels mode,Only for US915,AU915,CN470.
...	...	@@ -735,6 +735,7 @@
735	735	)))
736	736	|AT+CHE=1|Set eight channels mode|OK
737	737
	782	+
738	738	Downlink Command: 0x24
739	739
740	740	Format: Command Code (0x24) followed by 1 bytes channel value.
...	...	@@ -744,6 +744,7 @@
744	744	* Example 1: Downlink Payload: 2401 ~/~/ set channel mode to 1
745	745	* Example 2: Downlink Payload: 2405 ~/~/ set channel mode to 5
746	746
	792	+
747	747	== 7.20 Get or Set RXwindows1 timeout ==
748	748
749	749	Feature:Get or Set the number of symbols to detect and timeout from RXwindow1(0 to 255).
...	...	@@ -776,6 +776,7 @@
776	776	)))
777	777	|AT+RX2WTO=20|Set RXwindows2 timeout|OK
778	778
	825	+
779	779	== 7.22 Setting up uplinkdwelltime (as923, au915) ==
780	780
781	781	Feature: Get or Set uplinkdwelltime
...	...	@@ -789,6 +789,7 @@
789	789	)))
790	790	|AT+DWELLT=0|Set uplinkdwelltime|OK
791	791
	839	+
792	792	Downlink Command: 0x25
793	793
794	794	Format: Command Code (0x25) followed by 1 bytes state value.
...	...	@@ -798,6 +798,7 @@
798	798	* Example 1: Downlink Payload: 2501 ~/~/ set uplinkdwelltime to 1
799	799	* Example 2: Downlink Payload: 2500 ~/~/ set uplinkdwelltime to 0
800	800
	849	+
801	801	== 7.23 Set Packet Receiving Response Level ==
802	802
803	803	Feature: Get or Set packet receiving response level. This feature is used to set compatible with different LoRaWAN servers. If RPL doesn;t match , user will see strange message in the server portal.
...	...	@@ -816,6 +816,7 @@
816	816	* For Class C devices used in ChirpStack, need to set AT+RPL=4 because Chirpstack require immedietely reply message to MAC Command.
817	817	* For Class C devices used in TTI, need to set AT+RPL=4 because TTI require immediately reply message to Confirmed Data Down & MAC Command.
818	818
	868	+
819	819	AT Command: AT+RPL
820	820
821	821	|=(% colspan="3" %)AT+RPL
...	...	@@ -825,6 +825,7 @@
825	825	)))
826	826	|AT+RPL=0|Set packet receiving response level|OK
827	827
	878	+
828	828	Downlink Command: 0x21
829	829
830	830	Format: Command Code (0x21) followed by 1 bytes level value.
...	...	@@ -834,6 +834,7 @@
834	834	* Example 1: Downlink Payload: 2101 ~/~/ set packet receiving response level to 1
835	835	* Example 2: Downlink Payload: 2102 ~/~/ set packet receiving response level to 2
836	836
	888	+
837	837	= 8. AT Commands Combination =
838	838
839	839	== 8.1 Set a fix RX2DR for downlink window ==
...	...	@@ -841,6 +841,7 @@
841	841	* AT+ADR=0 ~-~-> Disable ADR first
842	842	* AT+RX2DR=xxxx ~-~-> Set xxxx to your wanted DataRate
843	843
	896	+
844	844	== 8.2 Use Downlink Command to set a fix uplink DR ==
845	845
846	846	Downlink Command: 0x22000500