Wiki source code of Armbian OS instruction
Version 93.1 by Kilight Cao on 2023/03/27 17:45
Hide last authors
author | version | line-number | content |
---|---|---|---|
15.1 | 1 | **Table of Contents:** | |
2 | |||
3 | {{toc/}} | ||
4 | |||
1.1 | 5 | ||
50.1 | 6 | ||
7 | |||
48.2 | 8 | = 1. Overview = | |
9 | |||
10 | |||
1.1 | 11 | This is a general instruction for the use of Armbian base OS of Dragino devices. Current models include: | |
12 | |||
13 | * HP0A | ||
14 | * HP0C | ||
15 | * LPS8v2 | ||
55.1 | 16 | * MS20 | |
1.1 | 17 | ||
90.3 | 18 | (% style="display:none" %) | |
90.2 | 19 | ||
20 | |||
48.2 | 21 | = 2. Development Guide = | |
22 | |||
23 | |||
70.4 | 24 | For advanced users to develop Driver/ Linux etc. | |
4.1 | 25 | ||
25.1 | 26 | ||
48.2 | 27 | == 2.1 How to recompile LoRaWAN Concentrator Driver ( dragino-fwd package). == | |
4.1 | 28 | ||
29 | |||
48.3 | 30 | === (% style="color:blue" %)**Step 1. Clone dragino-fwd package**(%%) === | |
4.1 | 31 | ||
30.1 | 32 | ||
70.4 | 33 | **Requirements:** | |
48.3 | 34 | ||
70.4 | 35 | **~ (% style="background-color:yellow; color:green" %)sudo apt install -y libsqlite3-dev(%%)** | |
30.1 | 36 | ||
70.4 | 37 | **~ (% style="background-color:yellow; color:green" %)sudo apt install -y libftdi1-dev(%%)** | |
11.1 | 38 | ||
48.3 | 39 | ||
70.4 | 40 | **Run command clone dragino-fwd package: (% style="background-color:yellow; color:green" %)git clone https:~/~/github.com/dragino/dragino_fwd_src.git(%%)** | |
11.1 | 41 | ||
70.4 | 42 | ||
11.1 | 43 | [[image:image-20220527151010-1.png]] | |
44 | |||
45 | |||
48.3 | 46 | === (% style="color:blue" %)**Step 2. Compile dragino_fwd**(%%) === | |
48.1 | 47 | ||
11.1 | 48 | ||
70.4 | 49 | **After cloning is complete, Run the command starts compiling:** | |
48.3 | 50 | ||
70.5 | 51 | (% style="background-color:yellow; color:green" %)**Compile HP0C/HP0A fwd: ./hp0z-make-deb.sh c** | |
70.4 | 52 | ||
70.5 | 53 | ||
11.1 | 54 | The following example compilers HP0C fwd. | |
55 | |||
56 | [[image:image-20220527153913-3.png]] | ||
57 | |||
58 | |||
59 | |||
70.5 | 60 | When the compilation is complete a** (% style="color:blue" %)draginofwd-*.deb(%%) **package is generated. | |
61 | |||
11.1 | 62 | [[image:image-20220527154311-4.png||height="385" width="773"]] | |
63 | |||
25.1 | 64 | ||
48.3 | 65 | === (% style="color:blue" %)**Step 3. Install the dragino_fwd**(%%) === | |
11.1 | 66 | ||
14.1 | 67 | ||
70.4 | 68 | **Run command:** | |
11.1 | 69 | ||
70.5 | 70 | (% style="background-color:yellow; color:green" %)**dpkg -i draginofwd-*.deb ** | |
11.1 | 71 | ||
70.4 | 72 | ||
11.1 | 73 | [[image:image-20220527154811-5.png]] | |
74 | |||
75 | |||
48.3 | 76 | === (% style="color:blue" %)**Step 4. Test**(%%) === | |
14.1 | 77 | ||
48.3 | 78 | ||
70.5 | 79 | **Check the dragino_fwd log:** | |
11.1 | 80 | ||
70.5 | 81 | (% style="background-color:yellow; color:green" %)**journalctl -u draginofwd -f** | |
11.1 | 82 | ||
70.4 | 83 | ||
13.1 | 84 | [[image:image-20220527165221-7.png||height="182" width="931"]] | |
11.1 | 85 | ||
48.3 | 86 | ||
70.5 | 87 | **Start/stop dragino_fwd via systemctl:** | |
11.1 | 88 | ||
70.5 | 89 | (% style="background-color:yellow; color:green" %)**systemctl start draginofwd** | |
13.1 | 90 | ||
70.5 | 91 | (% style="background-color:yellow; color:green" %)**systemctl stop draginofwd** | |
46.1 | 92 | ||
13.1 | 93 | ||
48.3 | 94 | == 2.2 How to clone Complete OS on the EMMC to SD card == | |
27.1 | 95 | ||
57.1 | 96 | == 2.3 How to flash SD card to (eMMC) device's built-in Memory == | |
48.3 | 97 | ||
67.2 | 98 | === 2.3.1 Prepare an SD card with OS === | |
57.1 | 99 | ||
67.2 | 100 | ||
70.5 | 101 | (% style="background-color:yellow" %)//**Preparations:**// | |
51.1 | 102 | ||
103 | ~1. Prepare an SD card and a// card reader device// | ||
104 | |||
105 | 2. Formatting the SD card (//Make sure the SD card is empty//) | ||
106 | |||
75.1 | 107 | 3. //Download the OS image from the **[[release.image>>url:http://repo.dragino.com/release/hp0c-image/]]**: ( File format **dragino-lps8v2-1.7.img** )// | |
51.1 | 108 | ||
61.1 | 109 | 4. //A Flash software tool ( Such as v1.7.9 from **[[balenaEtcher>>url:https://www.balena.io/etcher/]]** )// | |
51.1 | 110 | ||
111 | |||
112 | |||
67.2 | 113 | === 2.3.2 Flash SD card to device's eMMC === | |
114 | |||
115 | |||
57.1 | 116 | //1. Open the device's enclosure, and put the SD card into the SD card slot// | |
51.1 | 117 | ||
57.1 | 118 | //2. Power on the device and access the gateway's CLI via the serial port.// | |
51.1 | 119 | ||
57.1 | 120 | //3. Login and run the below command to flash.// | |
121 | |||
122 | |||
70.4 | 123 | **Run command:** | |
27.1 | 124 | ||
70.6 | 125 | (% style="background-color:yellow; color:green" %)**nand-sata-install** | |
27.1 | 126 | ||
70.4 | 127 | ||
27.1 | 128 | [[image:image-20220602112051-1.png]] | |
129 | |||
28.1 | 130 | ||
27.1 | 131 | ||
70.7 | 132 | Select the (% style="color:red" %)**"Boot from eMMC - system on eMMC".** | |
133 | |||
27.1 | 134 | [[image:image-20220602112058-2.png||height="292" width="646"]] | |
135 | |||
72.2 | 136 | ||
27.1 | 137 | [[image:image-20220602112106-3.png||height="301" width="643"]] | |
138 | |||
139 | |||
72.2 | 140 | ||
70.7 | 141 | Select the (% style="color:red" %)**"1 ext4"** | |
27.1 | 142 | ||
143 | [[image:image-20220602112113-4.png||height="271" width="642"]] | ||
144 | |||
145 | |||
70.7 | 146 | ||
27.1 | 147 | It takes 4-5 minutes to burn from SD card to eMMC | |
148 | |||
149 | [[image:image-20220602112119-5.png||height="309" width="641"]] | ||
150 | |||
72.2 | 151 | ||
27.1 | 152 | [[image:image-20220602112125-6.png||height="281" width="640"]] | |
153 | |||
72.2 | 154 | ||
27.1 | 155 | [[image:image-20220602112131-7.png||height="241" width="638"]] | |
156 | |||
157 | |||
158 | (% style="color:red" %)**Note: After the flash is complete, power off the device and then remove the SD card.** | ||
159 | |||
28.1 | 160 | ||
72.1 | 161 | == 2.4 Default Built Version == | |
67.2 | 162 | ||
72.2 | 163 | ||
72.1 | 164 | [[image:image-20220902155621-1.png]] | |
165 | |||
166 | |||
84.2 | 167 | == 2.5 How to upgrade the nodejs version to the latest. == | |
72.1 | 168 | ||
78.1 | 169 | ||
170 | By default, the nodejs uses the pre-install version v12 which is due to Debian the ultra-stable via ultra-old. | ||
171 | |||
172 | [[image:image-20221112145029-2.png]] | ||
173 | |||
174 | **If you want to upgrade the nodejs to the latest, please follow to use these commands on the gateway CIL.** | ||
175 | |||
176 | |||
177 | #install n, which is an Interactively Manage Your Node.js Versions | ||
178 | |||
83.1 | 179 | [[image:image-20221112154230-3.png||height="89" width="689"]] | |
78.1 | 180 | ||
181 | (% class="box infomessage" %) | ||
182 | ((( | ||
183 | **npm install -g n** | ||
184 | ))) | ||
185 | |||
186 | |||
187 | #Install the latest LTS Node.js release (downloading if necessary) | ||
188 | |||
83.1 | 189 | [[image:image-20221112154418-4.png||height="184" width="893"]] | |
190 | |||
78.1 | 191 | (% class="box infomessage" %) | |
192 | ((( | ||
193 | **n lts** | ||
194 | ))) | ||
195 | |||
196 | |||
197 | #Remove all downloaded versions except the installed version | ||
198 | |||
83.1 | 199 | [[image:image-20221112154456-5.png||height="139" width="899"]] | |
78.1 | 200 | ||
201 | (% class="box infomessage" %) | ||
202 | ((( | ||
203 | **n prune** | ||
204 | ))) | ||
205 | |||
206 | |||
207 | (% class="box infomessage" %) | ||
208 | ((( | ||
83.1 | 209 | **apt remove nodejs -y && apt autoremove -y && reboot** | |
78.1 | 210 | ))) | |
211 | |||
212 | |||
213 | Check the current version | ||
214 | |||
83.1 | 215 | [[image:image-20221112154724-6.png]] | |
78.1 | 216 | ||
217 | (% class="box infomessage" %) | ||
218 | ((( | ||
219 | **node -v** | ||
220 | ))) | ||
221 | |||
222 | |||
84.1 | 223 | == 2.6 How to install Grafana and influxdb == | |
224 | |||
225 | |||
226 | === **Grafana:** === | ||
227 | |||
228 | |||
229 | (% class="box infomessage" %) | ||
230 | ((( | ||
231 | curl https:~/~/packages.grafana.com/gpg.key | gpg ~-~-dearmor | sudo tee /usr/share/keyrings/grafana-archive-keyrings.gpg >/dev/null | ||
232 | echo "deb [signed-by=/usr/share/keyrings/grafana-archive-keyrings.gpg] https:~/~/packages.grafana.com/oss/deb stable main" | sudo tee /etc/apt/sources.list.d/grafana.list | ||
233 | apt update && apt install grafana | ||
234 | ))) | ||
235 | |||
236 | |||
237 | Check the running status: | ||
238 | |||
239 | |||
240 | (% class="box infomessage" %) | ||
241 | ((( | ||
242 | systemctl status grafana-server | ||
243 | ))) | ||
244 | |||
245 | |||
246 | configuration path: | ||
247 | |||
248 | |||
249 | (% class="box infomessage" %) | ||
250 | ((( | ||
251 | /etc/grafana/grafana.ini | ||
252 | ))) | ||
253 | |||
254 | |||
255 | === **Influxdb:** === | ||
256 | |||
257 | |||
258 | (% class="box infomessage" %) | ||
259 | ((( | ||
260 | curl https:~/~/repos.influxdata.com/influxdb.key | gpg ~-~-dearmor | sudo tee /usr/share/keyrings/influxdb-archive-keyring.gpg >/dev/null | ||
261 | echo "deb [signed-by=/usr/share/keyrings/influxdb-archive-keyring.gpg] https:~/~/repos.influxdata.com/debian $(lsb_release -cs) stable" | sudo tee /etc/apt/sources.list.d/influxdb.list | ||
262 | apt update && apt install influxdb | ||
263 | ))) | ||
264 | |||
265 | |||
266 | Check the running status: | ||
267 | |||
268 | |||
269 | (% class="box infomessage" %) | ||
270 | ((( | ||
271 | systemctl status influxdb | ||
272 | ))) | ||
273 | |||
274 | |||
275 | configuration path: | ||
276 | |||
277 | |||
278 | (% class="box infomessage" %) | ||
279 | ((( | ||
280 | /etc/influxdb/influxdb.conf | ||
281 | ))) | ||
282 | |||
283 | |||
90.1 | 284 | == 2.7 How to install BACnet == | |
63.1 | 285 | ||
90.3 | 286 | ||
90.1 | 287 | (% class="box infomessage" %) | |
288 | ((( | ||
289 | wget [[http:~~/~~/dragino.vicp.io:6080/bacnet/dragino-bacnet-apps-hp0c-2023-03-01.deb>>url:http://dragino.vicp.io:6080/bacnet/dragino-bacnet-apps-hp0c-2023-03-01.deb]] | ||
290 | dpkg -i dragino-bacnet-apps-hp0c-2023-03-01.deb | ||
291 | ))) | ||
292 | |||
293 | [[image:image-20230327152105-1.png||height="163" width="933"]] | ||
294 | |||
295 | |||
296 | === 2.7.1 Configure BACnet === | ||
297 | |||
298 | |||
299 | After BACnet is installed, run commands to modify BACnet configurations | ||
300 | |||
301 | Note: device_port and bacnet_ip_port are not set to the same | ||
302 | |||
303 | (% class="box infomessage" %) | ||
304 | ((( | ||
305 | nano /etc/config/bacnet | ||
306 | ))) | ||
307 | |||
308 | Examples: | ||
309 | |||
310 | (% class="box infomessage" %) | ||
311 | ((( | ||
312 | config settings 'general' | ||
313 | option bacnet_ip '10.130.2.80' #The IP address of the BACnetIP network, here basically the same IP as the bbmd address below | ||
314 | option bacnet_ip_port '47808' #As with bbmd_port, the purpose of this is to register a Bacnet Server application as a bbmd registration server | ||
315 | option bbmd_address '10.130.2.80' #bbmd is the BACnet registration server. Only one bbmd server is required in the same ip network | ||
316 | option bbmd_port '47808' #In general, 47808 is used as the default port | ||
317 | option bacnet_dev_count '2' #Here is the number of BACnet devices that need to be simulated, if the number is 2, then the following settings must have 2, which are bacdev_1, bacdev_2 | ||
318 | |||
319 | config settings 'bacdev_1' | ||
320 | option device_name 'LHT65N-1' #The identification name of the bacnet device | ||
321 | option device_id '10001' #The unique identification code in the same network segment of BACnet,Scope is(1 - 4194302) | ||
322 | option device_port '47912' #The IP port occupied by Bacnet when it starts, Scope is (1024 - 65535) | ||
323 | |||
324 | config settings 'bacdev_2' | ||
325 | option device_name 'LHT65N-2' | ||
326 | option device_id '10002' | ||
327 | option device_port '47913' | ||
328 | ))) | ||
329 | |||
90.3 | 330 | ||
90.1 | 331 | === 2.7.2 Run BACnet === | |
332 | |||
333 | |||
334 | After the configuration is complete, run the following command to start BACnet, The following are two ways to run BACnet: | ||
335 | |||
336 | (1)With /etc/config/bacnet configuration, and to run the registration server on the current machine, start it with the following command (configure the /etc/config/bacnet file correctly): | ||
337 | |||
338 | (% class="box infomessage" %) | ||
339 | ((( | ||
340 | bacserver -c -s | ||
341 | ))) | ||
342 | |||
343 | (2)Without /etc/config/bacnet, and to run the registration server on the current machine, start it with the following command: | ||
344 | |||
345 | (% class="box infomessage" %) | ||
346 | ((( | ||
347 | bacserver -s -a 10.130.2.80 -p 47808 | ||
348 | ))) | ||
349 | |||
350 | This command simulates two devices, with device IDs 47910 and 47911 | ||
351 | |||
352 | Enter bacserver -h to output help | ||
353 | |||
354 | (% class="box infomessage" %) | ||
355 | ((( | ||
356 | bacserver -h | ||
357 | ))) | ||
358 | |||
359 | [[image:image-20230327154700-3.png]] | ||
360 | |||
90.3 | 361 | ||
90.1 | 362 | === 2.7.3 Read devices and modify devices === | |
363 | |||
364 | |||
365 | Enter baccli -h to output help | ||
366 | |||
367 | (% class="box infomessage" %) | ||
368 | ((( | ||
369 | baccli -h | ||
370 | ))) | ||
371 | |||
372 | [[image:image-20230327165836-1.png]] | ||
373 | |||
374 | Examples: | ||
375 | |||
376 | |||
85.1 | 377 | = 4. Package Maintain Note = | |
67.2 | 378 | ||
85.1 | 379 | == 4.1 Default Package Maintain System == | |
67.2 | 380 | ||
85.1 | 381 | === 4.1.1 How Package-Auto-Update works? === | |
67.2 | 382 | ||
85.1 | 383 | ||
67.2 | 384 | By default, LPS8v2 / MS20 series products have an auto-update feature for main packages. The device will connect to Dragino's auto-update server and check for updates. | |
385 | |||
386 | |||
387 | (% style="color:blue" %)**When devices will check for updates**? | ||
388 | |||
389 | * Devices will check for updates for every boot. | ||
390 | * Devices will check for updates on every day midnight. | ||
391 | |||
392 | (% style="color:blue" %)**What packages will be checked for updates**? | ||
393 | |||
394 | dragino-httpd ~-~- Main Web UI http configuration | ||
395 | |||
396 | dragino-sid ~-~- SN write and read tool | ||
397 | |||
398 | dragino-ui ~-~- Gateway Web UI package | ||
399 | |||
400 | draginofwd ~-~- UDP packet forwarder, LoRa Base Station | ||
401 | |||
402 | draginoups ~-~- Miscellaneous between different versions | ||
403 | |||
404 | |||
70.9 | 405 | ||
67.2 | 406 | (% style="color:blue" %)**Location and changelog for packages**: | |
407 | |||
408 | * Location: http:~/~/repo.dragino.com/release/tool/ | ||
409 | * Changelog: [[http:~~/~~/repo.dragino.com/release/tool/Readme_HP0.txt>>http://repo.dragino.com/release/tool/Readme_HP0.txt]] | ||
410 | |||
411 | (% style="color:blue" %)**How to view auto-updated log** | ||
412 | |||
413 | You can view the log on the page of (% style="color:#037691" %)**System ~-~-> Package Management.** | ||
414 | |||
415 | |||
416 | [[image:1661305025451-220.png]] | ||
417 | |||
418 | |||
70.7 | 419 | ||
67.2 | 420 | (% style="color:blue" %)**Can I disable package-auto-update?** | |
421 | |||
70.8 | 422 | You can check the checkbox and click the(% style="color:red" %)** ‘SAVE’ **(%%)button to enable or disable the auto-update. | |
67.2 | 423 | ||
424 | |||
425 | [[image:1661305258501-636.png]] | ||
426 | |||
427 | |||
85.1 | 428 | === 4.1.2 How to manually update core packages? === | |
67.2 | 429 | ||
430 | |||
70.8 | 431 | You can click the (% style="color:red" %)**‘Manual Update’**(%%) to update the dragino's packages. | |
67.2 | 432 | ||
433 | |||
434 | [[image:1661305328295-218.png]] | ||
435 | |||
436 | |||
85.1 | 437 | === 4.1.3 How to manually update other packages? === | |
67.2 | 438 | ||
439 | |||
440 | For the other packages, you have to access the device's CLI to do it via the apt command. | ||
441 | |||
442 | |||
85.1 | 443 | == 4.2 Set up a 3^^rd^^ party package maintain server == | |
67.2 | 444 | ||
85.1 | 445 | === 4.2.1 Overview === | |
67.2 | 446 | ||
447 | |||
448 | Customers can use their own package maintenance system instead of using the default one from Dragino. They need to set up a package maintenance system for Debian. Lots of instructions are available in Internet, below is a reference instruction. | ||
449 | |||
450 | |||
85.1 | 451 | === 4.2.2 Install Apache2 HTTP server === | |
67.2 | 452 | ||
453 | |||
70.5 | 454 | (% style="background-color:yellow; color:green" %)**apt install apache2** | |
67.2 | 455 | ||
456 | |||
85.1 | 457 | === 4.2.3 Creating Package Directories === | |
67.2 | 458 | ||
459 | |||
70.5 | 460 | **~ (% style="background-color:yellow; color:green" %)cd /var/www/html/(%%)** | |
67.2 | 461 | ||
70.5 | 462 | **~ (% style="background-color:yellow; color:green" %)mkdir debian/release/dists/stable/main/binary-armhf/ -p(%%)** | |
67.2 | 463 | ||
70.5 | 464 | **~ (% style="background-color:yellow; color:green" %)mkdir debian/release/pool/main/d/dragino/ -p(%%)** | |
67.2 | 465 | ||
466 | |||
467 | **Tree Structure:** | ||
468 | |||
469 | (% style="color:red" %)**Note: If you are not familiar with updating servers, most directory names are not recommended to be changed.** | ||
470 | |||
471 | |||
472 | └── debian | ||
473 | |||
474 | └── release | ||
475 | |||
476 | ├── dists | ||
477 | |||
478 | │ └── stable | ||
479 | |||
480 | │ └── main | ||
481 | |||
482 | │ └── binary-armhf | ||
483 | |||
484 | └── pool | ||
485 | |||
486 | └── main | ||
487 | |||
488 | └── d | ||
489 | |||
70.5 | 490 | └── dragino ~-~-> (% style="background-color:yellow; color:green" %)**This is the directory to store the packages. User can change it to other name.** | |
67.2 | 491 | ||
492 | |||
85.1 | 493 | === 4.2.4 Get deb packages === | |
67.2 | 494 | ||
495 | |||
496 | The deb packages for auto-update can be placed in** (% style="color:blue" %)/var/www/html/debian/release/pool/main/d/dragino/(%%)** | ||
497 | |||
498 | Below is an example package(testing-0808.deb) for test purpose: | ||
499 | |||
500 | |||
70.5 | 501 | **~ (% style="background-color:yellow; color:green" %)wget http:~/~/repo.dragino.com/release/tool/unimportant/testing-0808.deb(%%)** | |
67.2 | 502 | ||
70.5 | 503 | **~ (% style="background-color:yellow; color:green" %)cp ./testing-0808.deb /var/www/html/debian/release/pool/main/d/dragino/(%%)** | |
67.2 | 504 | ||
505 | |||
85.1 | 506 | === 4.2.5 Generate Package Index file === | |
67.2 | 507 | ||
508 | |||
70.5 | 509 | (% style="background-color:yellow; color:green" %)**cd /var/www/html/debian/release/** | |
67.2 | 510 | ||
70.5 | 511 | (% style="background-color:yellow; color:green" %)**dpkg-scanpackages pool/ > dists/stable/main/binary-armhf/Packages** | |
67.2 | 512 | ||
70.5 | 513 | (% style="background-color:yellow; color:green" %)**cat dists/stable/main/binary-armhf/Packages | gzip -9 > dists/stable/main/binary-armhf/Packages.gz** | |
67.2 | 514 | ||
515 | |||
516 | (% style="color:red" %)**Note: Every time a package has been update, above comments need to be executed in the server to get the up-to-date package list.** | ||
517 | |||
518 | |||
85.1 | 519 | === 4.2.6 Generate Release file === | |
67.2 | 520 | ||
521 | |||
70.10 | 522 | ==== (% style="color:blue" %)**Create the generated script:**(%%) ==== | |
67.2 | 523 | ||
524 | |||
70.5 | 525 | (% style="background-color:yellow; color:green" %)**cd /var/www/html/debian/release/dists/stable** | |
67.2 | 526 | ||
527 | |||
70.5 | 528 | (% style="background-color:yellow; color:green" %)**wget [[http:~~/~~/repo.dragino.com/release/tool/unimportant/generate-release.sh>>url:http://repo.dragino.com/release/tool/unimportant/generate-release.sh]]** | |
67.2 | 529 | ||
70.5 | 530 | (% style="background-color:yellow; color:green" %)**chmod + x ./generate-release.sh** | |
67.2 | 531 | ||
70.5 | 532 | (% style="background-color:yellow; color:green" %)**./generate-release.sh > Release** | |
67.2 | 533 | ||
534 | |||
85.1 | 535 | === 4.2.7 Sign the Release file with gpg and generating Inrelease file === | |
67.2 | 536 | ||
537 | |||
70.7 | 538 | ==== (% style="color:blue" %)**Make sure auto-update server has gnupg**(%%) ==== | |
67.2 | 539 | ||
540 | |||
70.5 | 541 | (% style="background-color:yellow; color:green" %)**apt install gnupg** | |
68.2 | 542 | ||
543 | |||
544 | |||
70.7 | 545 | ==== (% style="color:blue" %)**generate gpg key**(%%) ==== | |
67.2 | 546 | ||
547 | |||
70.5 | 548 | (% style="background-color:yellow; color:green" %)**gpg -gen-key** | |
67.2 | 549 | ||
68.2 | 550 | ||
70.10 | 551 | (% style="color:red" %)**Note: Fill in the content as required and remember the name and email address.** | |
67.2 | 552 | ||
553 | |||
68.2 | 554 | ||
70.7 | 555 | ==== (% style="color:blue" %)**Check the gen-key**(%%) ==== | |
67.2 | 556 | ||
557 | |||
70.5 | 558 | (% style="background-color:yellow; color:green" %)**gen -list-key** | |
67.2 | 559 | ||
68.2 | 560 | ||
561 | |||
70.7 | 562 | ==== (% style="color:blue" %)**Generate the release.gpg**(%%) ==== | |
67.2 | 563 | ||
564 | |||
70.5 | 565 | (% style="background-color:yellow; color:green" %)**cd /var/www/html/debian/release/dists/stable** | |
67.2 | 566 | ||
70.5 | 567 | (% style="background-color:yellow; color:green" %)**gpg ~-~-armor ~-~-detach-sign -o Release.gpg Release** | |
67.2 | 568 | ||
569 | |||
70.5 | 570 | (% style="background-color:yellow; color:green" %)**gpg ~-~-clearsign -o InRelease Release** | |
67.2 | 571 | ||
572 | |||
68.2 | 573 | ||
70.7 | 574 | ==== (% style="color:blue" %)**Generate the public key**(%%) ==== | |
67.2 | 575 | ||
576 | |||
70.5 | 577 | (% style="background-color:yellow; color:green" %)**gpg ~-~-armor ~-~-output <name>.asc ~-~-export <email address>** | |
67.2 | 578 | ||
68.2 | 579 | ||
67.2 | 580 | **example: gpg ~-~-armor ~-~-output xiao.asc ~-~-export **[[xiaoye@dragino.cc>>mailto:xiaoye@dragino.cc]] | |
581 | |||
582 | |||
583 | |||
85.1 | 584 | === 4.2.8 Add url as apt source in LPS8v2 / MS20 === | |
67.2 | 585 | ||
68.2 | 586 | ||
587 | |||
70.7 | 588 | ==== (% style="color:blue" %)**Add the public key**(%%) ==== | |
67.2 | 589 | ||
590 | |||
70.5 | 591 | (% style="background-color:yellow; color:green" %)**cp xiao.asc /etc/apt/trusted.gpg.d/** | |
67.2 | 592 | ||
70.7 | 593 | ||
68.2 | 594 | (% style="color:red" %)**Note: First need to transfer the public key from auto-update server to device.** | |
67.2 | 595 | ||
68.2 | 596 | ||
597 | |||
70.7 | 598 | ==== (% style="color:blue" %)**Add the apt source list**(%%) ==== | |
67.2 | 599 | ||
68.2 | 600 | ||
67.2 | 601 | Add the apt source list url and name this as test_server.list | |
602 | |||
70.5 | 603 | (% style="background-color:yellow; color:green" %)**echo "deb http:~/~/<IP_address or hostname>/debian/release stable main" | tee /etc/apt/sources.list.d/test_server.list** | |
67.2 | 604 | ||
605 | |||
68.2 | 606 | ||
70.7 | 607 | ==== (% style="color:blue" %)**Validate the apt repository**(%%) ==== | |
67.2 | 608 | ||
68.2 | 609 | ||
67.2 | 610 | Get and install the testing package (download testing-0808.deb and test) | |
611 | |||
70.5 | 612 | (% style="background-color:yellow; color:green" %)**apt update && apt install testing** | |
67.2 | 613 | ||
68.2 | 614 | ||
67.2 | 615 | Example output: | |
616 | |||
68.2 | 617 | [[image:1661306420449-569.png]] | |
67.2 | 618 | ||
619 | |||
85.1 | 620 | === 4.2.9 Configure the gateway's auto-upgrade rules === | |
67.2 | 621 | ||
622 | |||
70.7 | 623 | ==== (% style="color:blue" %)**Remove dragino apt source**(%%) ==== | |
67.2 | 624 | ||
625 | |||
70.5 | 626 | (% style="background-color:yellow; color:green" %)**/etc/apt/sources.list** | |
67.2 | 627 | ||
628 | |||
70.2 | 629 | [[image:1661306460134-112.png]] | |
67.2 | 630 | ||
631 | |||
632 | |||
70.7 | 633 | ==== (% style="color:blue" %)**Set up automatic updates**(%%) ==== | |
67.2 | 634 | ||
635 | |||
70.5 | 636 | (% style="background-color:yellow; color:green" %)**Path : /usr/lib/dragino/dragino-apt-updates** | |
67.2 | 637 | ||
70.2 | 638 | ||
67.2 | 639 | The device performs automatic updates from this script, | |
640 | |||
641 | But it will now only look for dragino as a keyword, so you need to replace the keyword dragino with your own keyword. | ||
642 | |||
643 | |||
70.2 | 644 | [[image:1661306487761-768.png]] |