Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -1,13 +1,18 @@
1	1	(((
	2	+= **Introduction ** =
	3	+
	4	+----
	5	+
2	2	It is possible to GPS support in LG308 EC25 version so device will add location info to uplink packet to LoRaWAN server.
3	3	)))
4	4
	9	+
5	5	(((
6		-Below are the steps:
	11	+(% style="color:blue" %)**Below are the steps:**
7	7	)))
8	8
9	9	(((
10		-Open the box and connect GPS antenna to GNSS port of EC25
	15	+**~1. Open the box and connect GPS antenna to GNSS port of EC25**
11	11	)))
12	12
13	13	[[image:image-20220527160148-2.png]]
...	...	@@ -14,8 +14,9 @@
14	14
15	15	Connect GPS antenna
16	16
	22	+
17	17	(((
18		-modify the two files:
	24	+**2. modify the two files:**
19	19	)))
20	20
21	21	(((
...	...	@@ -40,13 +40,9 @@
40	40	)))
41	41
42	42	(((
43		-(% style="color:red" %)**Note: After above settings, the GPS will be enable when dial up, if user doesn't use Cellular for Internet access, above script won't execute, in this case, user can run "echo AT+QGPS=1 > /dev/ttyUSB2" to enable GPS**
	49	+(% style="color:red" %)**Note: After above settings, the GPS will be enable when dial up, if user doesn't use Cellular for Internet access, above script won't execute, in this case, user can run "echo AT+QGPS=1 > /dev/ttyUSB2" to enable GPS /usr/bin/generate-config.sh, after configure this, in the web page, select any frequency band and save to make this take affect.**
44	44	)))
45	45
46		-(((
47		-/usr/bin/generate-config.sh, after configure this, in the web page, select any frequency band and save to make this take affect.
48		-)))
49		-
50	50	(% class="box" %)
51	51	(((
52	52	(((
...	...	@@ -76,7 +76,7 @@
76	76	)))
77	77
78	78	(((
79		-Reboot the device and run logread -f to verify if GPS already works.
	81	+**3. Reboot the device and run logread -f to verify if GPS already works.**
80	80	)))
81	81
82	82	(% class="box" %)