Table of Contents:
This chapter introduces how users can change the uplinkdwell time.
Take AS923 frequency band as an example. We can see the spread spectrum factor corresponding to the data rate.
The device default uplinkdwelltime=1, there are SF7, SF8, SF9 and SF10.
If users want to ues SF11 and SF12, they need to set uplinkdwelltime=0.
Users can use AT commands to set uplinkdwell time.
Since Dragino LoRaWAN Stack DR_LWS_005, user is able to set the uplink Dwelltime in AS923 and AU915 manual or use a application side downlink command to set it.
Or via application downlink command: